Transcript
FEC40
FEC40 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 40Watts
FEATURES
APPLICATIONS
• 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 2.00 X 2.00 X 0.40 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
1600VDC ISOLATION
REMOTE CONTROL
UVP
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
SCP
OVP
OTP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number FEC40-12S1P5 FEC40-12S1P8 FEC40-12S2P5 FEC40-12S3P3 FEC40-12S05 FEC40-12S12 FEC40-12S15 FEC40-12D12 FEC40-12D15 FEC40-12D3305 FEC40-12T3312 FEC40-12T3315 FEC40-12T0512 FEC40-12T0515 FEC40-24S1P5 FEC40-24S1P8 FEC40-24S2P5 FEC40-24S3P3 FEC40-24S05 FEC40-24S12 FEC40-24S15 FEC40-24D12 FEC40-24D15 FEC40-24D3305 FEC40-24T3312 FEC40-24T3315 FEC40-24T0512 FEC40-24T0515 FEC40-48S1P5 FEC40-48S1P8 FEC40-48S2P5 FEC40-48S3P3 FEC40-48S05 FEC40-48S12 FEC40-48S15 FEC40-48D12 FEC40-48D15 FEC40-48D3305 FEC40-48T3312 FEC40-48T3315 FEC40-48T0512 FEC40-48T0515
Input Range
Output Voltage
VDC
VDC
9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75
1.5 1.8 2.5 3.3 5 12 15 ±12 ±15 3.3 / 5 3.3 / ±12 3.3 / ±15 5 / ±12 5 / ±15 1.5 1.8 2.5 3.3 5 12 15 ±12 ±15 3.3 / 5 3.3 / ±12 3.3 / ±15 5 / ±12 5 / ±15 1.5 1.8 2.5 3.3 5 12 15 ± 12 ± 15 3.3 / 5 3.3 / ±12 3.3 / ±15 5 / ±12 5 / ±15
Output Current @Full Load Min. Load (1) mA 0 0 0 0 0 0 0 ±144 ±112 0 600 / ±40 600 / ±30 600 / ±40 600 / ±30 0 0 0 0 0 0 0 ±144 ±112 0 600 / ±40 600 / ±30 600 / ±40 600 / ±30 0 0 0 0 0 0 0 ±144 ±112 0 600 / ±40 600 / ±30 600 / ±40 600 / ±30
otherwise noted
Input Current @ No Load
Efficiency
Maximum Capacitor Load (2)
mA
%
µF
110 110 110 175 225 255 310 30 35 325 215 230 280 255 40 40 40 60 80 70 85 20 20 80 65 65 60 75 25 25 25 35 40 50 50 15 15 45 35 35 30 40
84 82 84 86 86 86 87 85 85 85 84 84 86 86 81 83 86 87 89 88 89 87 87 86 85 85 87 87 82 84 86 88 90 89 89 87 87 88 86 86 88 88
Full Load mA 8000 8000 8000 8000 8000 3333 2666 ±1800 ±1400 4000 / 4000(3) 6000 / ±400 6000 / ±300 6000 / ±400 6000 / ±300 8000 8000 8000 8000 8000 3333 2666 ±1800 ±1400 4000 / 4000(3) 6000 / ±400 6000 / ±300 6000 / ±400 6000 / ±300 8000 8000 8000 8000 8000 3333 2666 ±1800 ±1400 4000 / 4000(3) 6000 / ±400 6000 / ±300 6000 / ±400 6000 / ±300
45000 37700 27000 21000 13600 2360 1510 ±1200 ±750 11000 / 6800 13000 / ±330 13000 / ±110 6800 / ±330 6800 / ±110 45000 37700 27000 21000 13600 2360 1510 ±1200 ±750 11000 / 6800 13000 / ±330 13000 / ±110 6800 / ±330 6800 / ±110 45000 37700 27000 21000 13600 2360 1510 ±1200 ±750 11000 / 6800 13000 / ±330 13000 / ±110 6800 / ±330 6800 / ±110
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FEC40 PART NUMBER STRUCTURE
FEC40 - 48 Series Name
S
Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75
Output Quantity S: Single
D: Dual Dual Positive T: Triple
05
INPUT SPECIFICATIONS Parameter
Start up time
Constant resistive load
Input surge voltage
100 ms, max.
Input filter Remote ON/OFF
Referred to –Vin pin
OUTPUT SPECIFICATIONS Parameter
Typ.
Max.
Unit
9 18 36
12 24 48 40
18 36 75
VDC
12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom)
8 16 34 25 25
DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current
Conditions
Low Line to High Line at Full Load
Single / Dual: Min. Load to Full Load
mAp-p 9 17.8 36
Positive logic
Voltage accuracy
Voltage adjustability (4) Ripple and noise
Min.
Nominal input and Full load
Shutdown voltage
Cross regulation
: None HS: Heat-sink HC: Heat-sink with Clamp
12Vin(nom) 24Vin(nom) 48Vin(nom)
Input reflected ripple current Start-up voltage
Load regulation
Assembly Option
Conditions
Operating input voltage range
Line regulation
HS
-
Output Voltage (VDC) 1P5: 1.5 1P8: 1.8 2P5: 2.5 3P3: 3.3 05: 5 12: 12 15: 15 12: ±12 15: ±15 3305: 3.3 / 5 3312: 3.3 / ±12 3315: 3.3 / ±15 0512: 5 / ±12 0515: 5 / ±15
-0.5
Min. Single / Dual Triple: 3.3Vout, 5Vout Triple: 12Vout, 15Vout Single / Dual Triple: 3.3Vout, 5Vout Triple: 12Vout, 15Vout Single Dual Triple: 3.3Vout, 5Vout Triple: 12Vout, 15Vout
Triple: Main output: :(3.3Vout, 5Vout) 10% to 100% with 10% to 100% balanced on auxiliaries. Auxiliary outputs 10% to 100% balanced on all outputs. Dual: Asymmetrical load 25%/100% FL Dual Triple: Main output:(3.3Vout, 5Vout) 100% load, Triple: 3.3Vout, 5Vout auxiliary 100%, other auxiliary 25% to 100% Triple: 12Vout, 15Vout load or main output:(3.3Vout, 5Vout) 25%, auxiliary 25%, other auxiliary 25% to 100%. Single and Dual output (not including Dual Positive and triple) Measured by 20MHz bandwidth With a 0.1µF/50V MLCC Single Others 12Vout, 15Vout Dual 12Vout 15Vout Triple 3.3Vout, 5Vout 12Vout, 15Vout With a 1µF ceramic output capacitors Dual Positive 3.3Vout, 5Vout
VDC
VDC ms
36 50 VDC 100 L-C type Open or 3.5 ~ 12VDC Short or 0 ~ 1.2VDC +0.5 mA 2.5 mA
Typ.
Max.
Unit
-1.0 -1.0 -5.0 -0.5 -1.0 -5.0 -0.5 -1.0 -2.0 -5.0
+1.0 +1.0 +5.0 +0.5 +1.0 +5.0 +0.5 +1.0 +2.0 +5.0
-5.0 -1.0 -5.0
+5.0 +1.0 +5.0
%
-10
+10
%
50 75 120 150 50 75 100
%
%
%
mVp-p
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FEC40 OUTPUT SPECIFICATIONS Parameter Temperature coefficient Transient response recovery time Over voltage protection
Over load protection Short circuit protection
Conditions
Min.
Typ.
-0.02 25% load step change Zener diode clamp
1.5Vout 1.8Vout 2.5Vout 3.3Vout 5Vout 12Vout 15Vout
% of Iout rated
Conditions 1 minute
Isolation resistance Isolation capacitance Switching frequency
500VDC
Min.
Input to Output Input(Output) to Case
Others Dual Positive
µs
3.9 3.9 3.9 3.9 6.2 15 18
VDC
Typ.
Max.
1600 1600 1
5Vout 3.3Vout
270 270 450
1000 330 330 550
300 300 500
GΩ pF kHz
UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper FR4 PCB Epoxy (UL94 V-0) 60g (2.11oz) 9.224 x 105 hrs
Conditions
Min. With derating
Typ.
-40
Max.
Unit
+85 +100 +115
-55 Vertical direction by natural convection (20LFM)
Without heat-sink With heat-sink With heat-sink (500LFM)
+125 9.2 7.6 2.8
/W
Thermal shock Vibration Relative humidity
MIL-STD-810F MIL-STD-810F 5% to 95% RH
EMC SPECIFICATIONS Parameter EMI (5) ESD Radiated immunity Fast transient (6) Surge (6) Conducted immunity Power frequency magnetic field
Unit VDC
MIL-HDBK-217F, Full load
ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature Maximum case temperature Over temperature protection Storage temperature range Thermal impedance
%/
250
Safety approvals
Case material Base material Potting material Weight MTBF
Unit
+0.02
150 % Continuous, automatics recovery
GENERAL SPECIFICATIONS Parameter Isolation voltage
Max.
Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Level
Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second
Class A, Class B Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A Perf. Criteria A
Note: 1. 2. 3. 4. 5. 6.
The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Test by minimum input and constant resistive load. Any condition of dual output (3.3Vout, 5Vout) rated Iout current, not to exceed 8A of total output currents. The product safety approval pending. For the single output: Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +Sense should be connected to its corresponding +Vout and likewise the -Sense should be connected to its corresponding -Vout. The standard module meet EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FEC40 CHARACTERISTIC CURVE
FEC40-48S05 Derating Curve
FEC40-48S05 Derating Curve With Heat-sink
FEC40-48S05 Efficiency vs. Input Voltage
FEC40-48S05 Efficiency vs. Output Load
MECHANICAL DRAWING PIN CONNECTION PIN
SINGLE
DUAL POSITIVE +Vin -Vin Ctrl 3.3Vout Common NC NC 5Vout Common
DUAL
1 +Vin 2 -Vin 3 Ctrl 4 NC 5 -Sense (4) 6 +Sense (4) 7 +Vout 8 -Vout 9 Trim * NC : No Connection
+Vin -Vin Ctrl No pin +Vout Common Common -Vout Trim
TRIPLE +Vin -Vin Ctrl +Aux Common -Aux +Vout Common NC
EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. ( ) for dual output trim. TRIM UP 5(8)
TRIM DOWN 9(9)
RU 9(9)
RD 6(5)
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
