Transcript
FEC40W SERIES DC-DC CONVERTER 4 : 1 ULTRA WIDE INPUT RANGE UP TO 40Watts
FEATURES
APPLICATIONS
• 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 2.00 X 2.00 X 0.40 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
1600VDC ISOLATION
REMOTE CONTROL
UVP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
OCP
SCP
OVP
OTP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number FEC40-24S3P3W FEC40-24S05W FEC40-24S12W FEC40-24S15W FEC40-24D12W FEC40-24D15W FEC40-48S3P3W FEC40-48S05W FEC40-48S12W FEC40-48S15W FEC40-48D12W FEC40-48D15W
Input Range
Output Voltage
VDC
VDC
9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75
3.3 5 12 15 ±12 ±15 3.3 5 12 15 ±12 ±15
Output Current @Full Load Min. Load (1) mA 0 0 50 50 ±65 ±50 0 0 50 50 ±65 ±60
otherwise noted
Input Current @ No Load
Efficiency
Maximum Capacitor Load (2)
mA
%
µF
75 95 50 50 60 70 55 60 30 25 30 30
87 88 87 87 86 86 87 89 87 88 87 86
25750 13600 2360 1510 ±1200 ±750 25750 13600 2360 1510 ±1200 ±750
Full Load A 10 8 3.33 2.67 ±1.67 ±1.33 10 8 3.33 2.67 ±1.67 ±1.33
PART NUMBER STRUCTURE
FEC40 - 48 Series Name
Input Voltage (VDC) 24: 9~36 48: 18~75
S Output Quantity S: Single
D: Dual
05 Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 12: ±12 15: ±15
W Input Range 4:1
N
HS
Remote Control Option
Assembly Option
: Positive logic N: Negative logic
: None HS: Heat-sink HC: Heat-sink & Clamp
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FEC40W INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
24Vin(nom) 48Vin(nom)
Input reflected ripple current Start up voltage
Typ.
Max.
Unit
9 18
24 48 20
36 75
VDC
24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom)
Shutdown voltage Start up time
Min.
Constant resistive load
mAp-p 9 18
8 16
VDC VDC
20 ms 20 Input surge voltage 100 ms, max. 50 VDC 100 Advice Electronics Ltd Input filter Pi type Remote ON/OFF Referred to –Vin pin Positive logic DC-DC ON Open or 3 ~ 12VDC Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910 www.advice.co.il (Standard)
[email protected] OFF Short or 0 ~ 1.2VDC Negative logic DC-DC ON Short or 0 ~ 1.2VDC (Option) DC-DC OFF Open or 3 ~ 12VDC Input current of Ctrl pin -0.5 +0.5 mA Remote off 24Vin(nom) 10 mA input current 48Vin(nom) 5
OUTPUT SPECIFICATIONS Parameter
Conditions
Voltage accuracy Line regulation
Low Line to High Line at Full Load
Load regulation
Min. Load to Full Load
Cross regulation Voltage adjustability (3) Ripple and noise
Asymmetrical load 25%/100% FL
Single Dual Dual
20MHz bandwidth
Single Dual
Temperature coefficient Transient response recovery time Over voltage protection
Over load protection Short circuit protection
Case grounding Isolation resistance Isolation capacitance Switching frequency Safety approvals
Case material Base material Potting material Weight MTBF
Max.
Unit
-1.0 -0.2
+1.0 +0.2
%
-0.5 -1.0 -5.0 -10
+0.5 +1.0 +5.0 +10
3.3Vout, 5Vout 12Vout, 15Vout 12Vout 15Vout
Typ.
50 75 120 150 -0.02
25% load step change Zener diode clamp
% of Iout rated
% % % % mVp-p
+0.02 250 3.9 6.2 15 18
3.3Vout 5Vout 12Vout 15Vout
%/℃ µs VDC
150 % Continuous, automatics recovery
GENERAL SPECIFICATIONS Parameter Isolation voltage
Min.
Conditions
1 minute
Input to Output Input (Output) to Case
500VDC
MIL-HDBK-217F, Full load
Min.
Typ.
Max.
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
Unit
1600 VDC 1600 Connect case to –Vin with decoupling Y Cap 1 GΩ 2500 pF 270 300 330 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper FR4 PCB Epoxy (UL94 V-0) 60g (2.11oz) 6.617 x 105 hrs
[email protected]
www.advice.co.il
FEC40W ENVIRONMENTAL SPECIFICATIONS Parameter
Conditions
Operating ambient temperature Maximum case temperature Over temperature protection Storage temperature range Thermal impedance
Min. Without derating With derating
Typ.
-40 +50
Max.
Unit
+50 +105 +105 +110
-55 Natural convection (20LFM)
Without heat-sink With heat-sink
Thermal shock Vibration Relative humidity
+125 9.2 7.6
/W MIL-STD-810F MIL-STD-810F 5% to 95% RH
EMC SPECIFICATIONS Parameter EMI (4) ESD Radiated immunity Fast transient (5) Surge (5) Conducted immunity Power frequency magnetic field
Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Level
Air ± 8kV and Contact ± 6kV 10 V/m ±2kV ±1kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second
Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: 1. 2. 3. 4. 5.
The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Test by minimum input and constant resistive load. For the single output: Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +Sense should be connected to its corresponding +Vout and likewise the -Sense should be connected to its corresponding -Vout. The standard module meets EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
FEC40-48S05W Derating Curve
FEC40-48S05W Derating Curve With Heat-sink
FEC40-48S05W Efficiency vs. Input Voltage
FEC40-48S05W Efficiency vs. Output Load
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FEC40W MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6 7 8
SINGLE +Vin -Vin Ctrl -Sense (3) +Sense (3) +Vout -Vout Trim
DUAL +Vin -Vin Ctrl +Vout Common Common -Vout Trim
EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. ( ) for dual output trim. TRIM UP 4(7)
TRIM DOWN 8(8)
RU 8(8)
RD 5(4)
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
