Transcript
FED60 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 60Watts
FEATURES
APPLICATIONS
• NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 2.00 X 1.00 X 0.40 INCH • SIX-SIDED CONTINUOUS SHIELD • SAFETY MEETS UL60950-1, EN60950-1, IEC60950-1, & EN50155 • CE MARKED • COMPLIANT TO RoHS II & REACH
1600VDC ISOLATION
REMOTE CONTROL
UVP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
OCP
SCP
OVP
OTP
LOW STANDBY POWER
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number FED60-12S3P3 FED60-12S05 FED60-12S12 FED60-12S15 FED60-12S24 FED60-12D12 FED60-12D15 FED60-12D24 FED60-24S3P3 FED60-24S05 FED60-24S12 FED60-24S15 FED60-24S24 FED60-24D12 FED60-24D15 FED60-24D24 FED60-48S3P3 FED60-48S05 FED60-48S12 FED60-48S15 FED60-48S24 FED60-48D12 FED60-48D15 FED60-48D24
Input Range
Output Voltage
Output Current @Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load (1)
VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75
VDC 3.3 5 12 15 24 ±12 ±15 ±24 3.3 5 12 15 24 ±12 ±15 ±24 3.3 5 12 15 24 ±12 ±15 ±24
A 12 12 5 4 2.5 ±2.5 ±2 ±1.25 12 12 5 4 2.5 ±2.5 ±2 ±1.25 12 12 5 4 2.5 ±2.5 ±2 ±1.25
mA 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
% 89 90 90 91 92 90 90 91 90 92 91 92 91 90 90 91 90 92 92 92 92 91 91 91
µF 32000 30000 5850 3900 2000 ±3900 ±2400 ±1000 32000 30000 5850 3900 2000 ±3900 ±2400 ±1000 32000 30000 5850 3900 2000 ±3900 ±2400 ±1000
PART NUMBER STRUCTURE
FED60 Series Name
48 Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75
S Output Quantity S: Single
D: Dual
05 Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 24: 24 12: ±12 15: ±15 24: ±24
-
N
HS
Remote Control options : Positive logic N: Negative logic
Assembly Option : None HS: Heat-sink HC: Heat-sink with Clamp
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FED60 INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom)
Start-up voltage
Shutdown voltage
Start up time
Constant resistive load
Input surge voltage
1 second, max.
Input filter Remote ON/OFF
Referred to –Vin pin
Conditions
Voltage accuracy Line regulation Load regulation
Low Line to High Line at Full Load No Load to Full Load
Cross regulation Voltage adjustability
Asymmetrical load 25%/100% FL Single output
Ripple and noise
Measured by 20MHz bandwidth With a 10µF/25V X7R MLCC With a 10µF/25V X7R MLCC With a 4.7µF/50V X7R MLCC
Temperature coefficient Transient response recovery time Over voltage protection
Over load protection Short circuit protection
Isolation resistance Isolation capacitance Switching frequency Safety meets
Case material Base material Potting material Weight MTBF
Max.
12 24 48
18 36 75 9 18 36
-0.5
Min.
Typ.
-1.0 -0.2 -0.5 -1.0 -5.0 -10 -10
3.3Vout, 5Vout 12Vout, 15Vout 24Vout
75 100 150
3.3Vout 5Vout 12Vout 15Vout 24Vout
% of Iout rated; Hiccup mode
Conditions Input to Output Input (Output) to Case
1 minute 500VDC
VDC
VDC
ms VDC
mA mA
Max.
Unit
+1.0 +0.2 +0.5 +1.0 +5.0 +10 +20
% %
100 125 200 +0.02
% % %
mVp-p
%/℃ 250 µs 3.9 6.2 15 VDC 20 30 150 % Continuous, automatics recovery
Min.
Typ.
1600 1600 1 225
MIL-HDBK-217F, Full load.
Max.
[email protected]
Unit VDC
250
GΩ pF kHz UL60950-1 EN60950-1 IEC60950-1 Copper FR4 PCB Silicone (UL94 V-0) 33g (1.16oz) 8.804 x 105 hrs 2200 275
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
Unit
VDC
25 50 100 Pi type Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC 0.5 3
-0.02 25% load step change Zener diode clamp
GENERAL SPECIFICATIONS Parameter Isolation voltage
Single Dual Dual 3.3Vout, 5Vout, 12Vout 15Vout, 24Vout
Typ.
9 18 36
8 16 32 60 60
Positive logic DC-DC ON (Standard) DC-DC OFF Negative logic DC-DC ON (Option) DC-DC OFF Input current of Ctrl pin Remote off input current
OUTPUT SPECIFICATIONS Parameter
Min.
www.advice.co.il
FED60 ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature Maximum case temperature Over temperature protection Storage temperature range Thermal impedance
Conditions
Min. With Derating
Typ.
-40
Max.
Unit
+105 +105
℃ ℃ ℃ ℃
+115 -55 Vertical direction by natural convection (20LFM)
Without Heat-sink WIith Heat-sink
+125 10.8 10.3
Thermal shock Vibration Relative humidity
℃/W MIL-STD-810F MIL-STD-810F 5% to 95% RH
EMC SPECIFICATIONS Parameter EMI (2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Power frequency magnetic field
Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Level Class A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Air ± 8kV and Contact ± 6kV 20 V/m ± 2kV ± 2kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second
Note: 1. 2. 3.
Test by minimum input and constant resistive load. The standard module meets EMI Class A or Class B with external components. For further information, please contact with P-DUKE. The external input components are required if the module has to meet EN61000-4-4, EN61000-4-5. The FED60-12 and The FED60-24 recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ58A, 58V, 3000Watt peak pulse power) to connect in parallel. The FED60-48 recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ120A, 120V, 3000Watt peak pulse power) to connect in parallel.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
FED60-48S12 Derating Curve
FED60-48S12 Derating Curve with Heat-sink
FED60-48S12 Efficiency VS Input Voltage
FED60-48S12 Efficiency VS Output Load
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FED60 MECHANICAL DRAWING PIN CONNECTION PIN SINGLE 1 +Vin 2 -Vin 3 Ctrl 4 +Vout 5 -Vout 6 Trim
DUAL +Vin -Vin Ctrl +Vout Common -Vout
EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP
TRIM DOWN
6
6
RU 5
RD 4
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
