Transcript
FKC03 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 3 Watts
FEATURES
APPLICATIONS
• NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH 24 PIN DIP AND SMD PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
1600VDC ISOLATION
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
SCP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number
otherwise noted
Input Range
Output Voltage
Output Current @Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load
VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75
VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15
mA 500 500 250 200 ±250 ±125 ±100 500 500 250 200 ±250 ±125 ±100 500 500 250 200 ±250 ±125 ±100
mA 10 10 10 15 15 15 20 10 10 15 15 15 20 20 5 10 10 10 10 10 10
% 75 76 80 81 78 80 82 72 74 78 78 74 77 77 74 74 79 78 73 79 77
µF 2200 1000 220 150 ±470 ±100 ±68 2200 1000 220 150 ±470 ±100 ±68 2200 1000 220 150 ±470 ±100 ±68
FKC03-12S33 FKC03-12S05 FKC03-12S12 FKC03-12S15 FKC03-12D05 FKC03-12D12 FKC03-12D15 FKC03-24S33 FKC03-24S05 FKC03-24S12 FKC03-24S15 FKC03-24D05 FKC03-24D12 FKC03-24D15 FKC03-48S33 FKC03-48S05 FKC03-48S12 FKC03-48S15 FKC03-48D05 FKC03-48D12 FKC03-48D15
PART NUMBER STRUCTURE
FKC03 - 48 Series Name
Input Voltage (VDC) 12: 9~18 24:18~36 48:36~75
S Output Quantity S:Single
D: Dual
05 Output Voltage (VDC) 33: 3.3 05: 5 12:12 15:15 05:± 5 12:±12 15:±15
M1
SMD
Operating Temp. Option
Mounting Type Option
: Standard type -25~+85℃ With derating M1: -40~+85℃ Without derating M2: -40~+85℃ With derating
: DIP type SMD: SMD type
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FKC03 INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
Start up time Input surge voltage
12Vin(nom) 24Vin(nom) 48Vin(nom) Power up 12Vin(nom) 24Vin(nom) 48Vin(nom)
Constant resistive load 100 ms, max.
Min.
Typ.
Max.
9 18 36
12 24 48
18 36 75 350 36 50 100
Input reflected ripple current Input filter
20
Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over load protection Short circuit protection
Conditions Low Line to High Line at Full Load No Load to Full Load
Case material Base material Potting material Weight MTBF
1 minute
Typ.
Min.
Input to Output Input (Output) to Case Input to Output Input (Output) to Case
1600 1600 1600 1000 1 270
MIL-HDBK-217F
Conditions Standard M1 Version M2 Version
Typ.
% % %
Typ.
-25 -40 -40
Max.
Conditions
Unit
+85 +85 +85 100 +125
/W MIL-STD-810F MIL-STD-810F 5% to 95% RH
20
Level
Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second
Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
Unit
GΩ pF 300 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 18g (0.62oz) 7.289 x 106 hrs
Min. With derating Without derating With deraitng
Max.
300 330
-55
EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Unit
+1.0 +0.2 +0.2 +1.0 +5.0
VDC
Natural convection
EMC SPECIFICATIONS Parameter
Max.
% mVp-p -0.02 +0.02 %/ 200 µs 180 % Continuous, automatics recovery
500VDC
Operating ambient temperature(1)
EMI(2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Power frequency magnetic field
VDC
50
Conditions DIP type
ENVIRONMENTAL SPECIFICATIONS Parameter
Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity
ms
mAp-p
-1.0 -0.2 -0.2 -1.0 -5.0
25% load step change % of Iout rated
SMD type Isolation resistance Isolation capacitance Switching frequency Safety approvals
Min. Single Dual Dual
Asymmetrical load 25%/100% FL 20MHz bandwidth
GENERAL SPECIFICATIONS Parameter Isolation voltage
VDC
Pi type
OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation
Unit
[email protected]
www.advice.co.il
FKC03 Note: 1. 2. 3.
It’s higher efficiency for M1 version. Therefore, it can be operated in a more extensive temperature range than standard and M2 version. The standard module meets EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter Power Mate suggests: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
FKC03-48S05 Derating Curve
FKC03-48S05-M1 Derating Curve
FKC03-48S05 Efficiency vs. Input Voltage
FKC03-48S05 Efficiency vs. Output Load
MECHANICAL DRAWING DIP type
PIN CONNECTION PIN SINGLE 2 -Vin 3 -Vin 9 10 11
SMD type
NC NC NC
PIN CONNECTION PIN SINGLE 2 -Vin 3 -Vin 9 10 11 Others
NC NC NC NC
DUAL -Vin -Vin
PIN 23 22
SINGLE +Vin +Vin
DUAL +Vin +Vin
Common NC -Vout
16 15 14
-Vout NC +Vout
Common NC +Vout
DUAL -Vin -Vin
PIN 23 22
SINGLE +Vin +Vin
DUAL +Vin +Vin
Common NC -Vout NC
16 15 14
-Vout NC +Vout
Common NC +Vout
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
