Transcript
FKC12 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 12 Watts
FEATURES
APPLICATIONS
• NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH 24 PIN DIP AND SMD PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
1600VDC ISOLATION
REMOTE CONTROL
UVP
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
SCP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number
otherwise noted
Input Range
Output Voltage
Output Current @Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load
VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75
VDC 2.5 3.3 5.1 12 15 ±5 ±12 ±15 2.5 3.3 5.1 12 15 ±5 ±12 ±15 2.5 3.3 5.1 12 15 ±5 ±12 ±15
mA 3500 3500 2400 1000 800 ±1200 ±500 ±400 3500 3500 2400 1000 800 ±1200 ±500 ±400 3500 3500 2400 1000 800 ±1200 ±500 ±400
mA 50 60 53 15 17 24 19 24 36 36 35 16 17 15 15 18 10 14 23 11 5 6 6 6
% 82 84 86 86 86 82 87 87 83 85 87 87 87 83 88 88 83 85 87 87 87 83 88 88
µF 2000 2000 2000 430 300 ±1250 ±200 ±120 2000 2000 2000 430 300 ±1250 ±200 ±120 2000 2000 2000 430 300 ±1250 ±200 ±120
FKC12-12S2P5 FKC12-12S3P3 FKC12-12S05 FKC12-12S12 FKC12-12S15 FKC12-12D05 FKC12-12D12 FKC12-12D15 FKC12-24S2P5 FKC12-24S3P3 FKC12-24S05 FKC12-24S12 FKC12-24S15 FKC12-24D05 FKC12-24D12 FKC12-24D15 FKC12-48S2P5 FKC12-48S3P3 FKC12-48S05 FKC12-48S12 FKC12-48S15 FKC12-48D05 FKC12-48D12 FKC12-48D15
PART NUMBER STRUCTURE
FKC12 - 48 Series Name
Input Voltage (VDC) 12: 9~18 24:18~36 48:36~75
S
05 - SMD
Output Quantity
Output Voltage (VDC) S:Single 2P5: 2.5 3P3: 3.3 05: 5.1 12:12 15:15
D: Dual
Mounting Type Option : DIP type SMD: SMD type
05:± 5 12:±12 15:±15
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FKC12 INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom)
Start up voltage
Shutdown voltage
Start up time
Constant resistive load
Input surge voltage
100 ms, max.
Input reflected ripple current Input filter Remote ON/OFF
Referred to –Vin pin
18 36 75 9 18 36
No Load to Full Load
DIP type
SMD type
Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over voltage protection
Asymmetrical load 25%/100% FL 20MHz bandwidth
Over load protection Short circuit protection
% of Iout rated
ms
-0.5
Min. Single Dual Single 2.5Vout Single others Dual Single 2.5Vout Single others Dual Dual
2.5Vout 3.3Vout 5.1Vout 12Vout 15Vout
1 minute
Conditions DIP type SMD type
Input to Output Input (Output) to Case Input to Output Input (Output) to Case
500VDC
Typ.
-1.2 -0.2 -0.5 -1.0 -0.5 -1.0 -1.0 -1.0 -1.0 -5.0
mAp-p
mA mA
Max.
Unit
+1.2 +0.2 +0.5 +1.0 +0.5 +1.0 +1.0 +1.0 +1.0 +5.0
% %
%
% mVp-p %/ µs
+0.02 250 3.9 3.9 6.2 VDC 15 18 150 % Continuous, automatics recovery
Min. 1600 1600 1600 1000 1 360
MIL-HDBK-217F
VDC
Pi type Open or 3.0 ~ 12VDC Short or 0 ~ 1.2VDC +0.5 2.5
-0.02
GENERAL SPECIFICATIONS Parameter
VDC
VDC
85
25% load step change Single Output
VDC
36 50 100
Conditions
Load regulation
Unit
8 16 33 450 5
DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current
Low Line to High Line at Full Load
Case material Base material Potting material Weight MTBF
Max.
12 24 48
Positive logic
Voltage accuracy Line regulation
Isolation resistance Isolation capacitance Switching frequency Safety approvals
Typ.
9 18 36
20
OUTPUT SPECIFICATIONS Parameter
Isolation voltage
Min.
Typ.
Max.
VDC GΩ pF 400 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 18g (0.62oz) 2.064 x 106 hrs 1200 440
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
Unit
[email protected]
www.advice.co.il
FKC12 ENVIRONMENTAL SPECIFICATIONS Parameter
Conditions 2.5Vout, 3.3Vout, ±5Vout
Operating ambient temperature
Others Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity
Typ.
-40 +61 -40 +66
Unit
/W MIL-STD-810F MIL-STD-810F 5% to 95% RH
20
Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Max. +61 +100 +66 +100 100 +125
-55 Natural convection
EMC SPECIFICATIONS Parameter EMI(1) ESD Radiated immunity Fast transient (2) Surge (2) Conducted immunity Power frequency magnetic field
Min. Without derating With derating Without derating With derating
Level
Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second
Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: 1. 2.
The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter Power Mate suggests: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
FKC12-48S05 Derating Curve
FKC12-48S05 Efficiency vs. Input Voltage
FKC12-48S05 Efficiency vs. Output Load
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
FKC12 MECHANICAL DRAWING DIP type
PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11
SMD type
NC NC
PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 Others
NC NC NC
DUAL Ctrl -Vin -Vin
PIN
SINGLE
DUAL
23 22
+Vin +Vin
+Vin +Vin
Common -Vout
16 14
-Vout +Vout
Common +Vout
DUAL Ctrl -Vin -Vin
PIN
SINGLE
DUAL
23 22
+Vin +Vin
+Vin +Vin
Common -Vout NC
16 14
-Vout +Vout
Common +Vout
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
