Transcript
LCD10
LCD10 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 10Watts
FEATURES
APPLICATIONS
• NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE： ：1.0 x 1.0 x 0.39 INCH • SIX-SIDED CONTINUOUS SHIELD • BUILT-IN EN55022 CLASS B FILTER • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
1600VDC ISOLATION
REMOTE CONTROL
UVP
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
SCP
LOW STANDBY POWER
OVP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number
otherwise noted
Input Range
Output Voltage
Output Current @Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load (1)
VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75
VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15
mA 3000 2000 830 670 416 ±1000 ±416 ±333 3000 2000 830 670 416 ±1000 ±416 ±333 3000 2000 830 670 416 ±1000 ±416 ±333
mA 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 6 4 4 4 4 4 4 4 4
% 83 86 89 90 91 86 89 90 85 86 91 90 91 86 90 90 85 87 90 90 91 87 91 90
µF 3500 2500 430 350 125 ±1440 ±250 ±180 3500 2500 430 350 125 ±1440 ±250 ±180 3500 2500 430 350 125 ±1440 ±250 ±180
LCD10-12S3P3 LCD10-12S05 LCD10-12S12 LCD10-12S15 LCD10-12S24 LCD10-12D05 LCD10-12D12 LCD10-12D15 LCD10-24S3P3 LCD10-24S05 LCD10-24S12 LCD10-24S15 LCD10-24S24 LCD10-24D05 LCD10-24D12 LCD10-24D15 LCD10-48S3P3 LCD10-48S05 LCD10-48S12 LCD10-48S15 LCD10-48S24 LCD10-48D05 LCD10-48D12 LCD10-48D15
PART NUMBER STRUCTURE
LCD10 - 48 Series Name
Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75
S Output Quantity S: Single
D: Dual
05 Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 24: 24 05: ±5 12: ±12 15: ±15
: A: B: C: D: E:
A
HS
Option
Assembly Option
Negative logic remote ON/OFF(Standard) Positive logic remote ON/OFF Without Ctrl pin Negative logic remote ON/OFF without Trim pin Without Ctrl & Trim pin Positive logic remote ON/OFF without Trim pin
: None HS: Heat-sink HC: Heat-sink & Clamp
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
LCD10 INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
Input reflected ripple current Start-up voltage
12Vin(nom) 24Vin(nom) 48Vin(nom)
Start up time
Constant resistive load
Input surge voltage
1 second, max.
12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom) Positive logic DC-DC ON (Option) DC-DC OFF Negative logic DC-DC ON (Standard) DC-DC OFF Input current of Ctrl pin Remote off input current
Referred to –Vin pin
OUTPUT SPECIFICATIONS Parameter
Conditions
Output power
Low Line to High Line at Full Load
Load regulation
No Load to Full Load
Cross regulation Voltage adjustability (2)
Asymmetrical load 25%/100% FL Single output
Ripple and noise
Measured by 20MHz bandwidth With a 10µF/25V X7R 1206 MLCC
VDC
8 16 33
-0.5
Typ.
40 60
24Vout
% of Iout rated; Hiccup mode
GENERAL SPECIFICATIONS Parameter Isolation resistance Isolation capacitance Switching frequency Safety approvals
500VDC
VDC
mA mA
Unit W % %
% % %
mVp-p
+0.02 250
3.3Vout 5Vout 12Vout 15Vout 24Vout
ms
60
25% load step change
1 minute
Max. 11 12 +1.0 +0.2 +0.5 +0.2 +1.0 +0.1 +0.8 +5.0 +10 +20
-1.0 -0.2 -0.5 -0.2 -1.0 -0.1 -0.8 -5.0 -10 -10
VDC
VDC
30 30 25 50 100 Open or 3 ~ 15VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 15VDC 1.0 2.5
-0.02
Isolation voltage
mAp-p 9 18 36
3.3Vout, 5Vout 12Vout, 15Vout
With a 1µF/50V X7R 1206 MLCC
Case material Base material Potting material Weight MTBF
Unit
18 36 75
Min.
Single Dual Single Dual Single Dual Dual 3.3Vout, 12Vout Others
10% Load to 90%Load
Over load protection Short circuit protection
Max.
12 24 48 30
Output voltage trimmed up 10% Output voltage trimmed up 20%
Voltage accuracy Line regulation
Temperature coefficient Transient response recovery time Over voltage protection
Typ.
9 18 36
Nominal input and Full load
Shutdown voltage
Remote ON/OFF
Min.
3.7 6.3 13.5 18.3 29.1
5.4 7.4 19.6 22.0 32.5
%/ µs
VDC
150 % Continuous, automatics recovery
Conditions Input to Output Input(Output) to Case
Min.
Typ.
1600 1000 1 297
MIL-HDBK-217F, Full load
Max.
VDC
330
GΩ pF kHz UL60950-1 EN60950-1 IEC60950-1 Copper FR4 PCB Epoxy (UL94 V-0) 16.5g (0.58oz) 3.308 x 106 hrs 1500 363
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
Unit
www.advice.co.il
LCD10 ENVIRONMENTAL SPECIFICATIONS Parameter
Conditions
Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance
Min. Without derating With derating
Typ.
Max.
-40 +78 -55
Vertical direction by natural convection (20LFM)
Without heat-sink With heat-sink
Unit
+78 +105 105 +125 16.18 15.13
/W
Thermal shock Vibration Relative humidity
MIL-STD-810F MIL-STD-810F 5% to 95% RH
EMC SPECIFICATIONS Parameter EMI (3) ESD Radiated immunity Fast transient (4) Surge (4) Conducted immunity Power frequency magnetic field
Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Level
Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 3 Vr.m.s 100A/m continuous; 1000A/m 1 second
Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: 1. 2. 3. 4.
Test by minimum input and constant resistive load. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the Trim pin and either +Vout pin or -Vout pin. The standard modules meet EN55022 Class A without external components and meet Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
LCD10-48S05 Derating Curve
LCD10-48S05 Derating Curve With Heat-sink
LCD10-48S05 Efficiency vs. Input Voltage
LCD10-48S05 Efficiency vs. Output Load
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
LCD10 MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6
SINGLE +Vin -Vin Ctrl +Vout Trim -Vout
DUAL +Vin -Vin Ctrl +Vout Common -Vout
EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP
TRIM DOWN
6
5
RU 5
RD 4
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
