Transcript
LCD15 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 15Watts
FEATURES
APPLICATIONS
• NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE： ：1.0 x 1.0 x 0.39 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
1600VDC ISOLATION
REMOTE CONTROL
UVP
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
SCP
OVP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number LCD15-12S3P3 LCD15-12S05 LCD15-12S12 LCD15-12S15 LCD15-12S24 LCD15-12D05 LCD15-12D12 LCD15-12D15 LCD15-12D24 LCD15-24S3P3 LCD15-24S05 LCD15-24S12 LCD15-24S15 LCD15-24S24 LCD15-24D05 LCD15-24D12 LCD15-24D15 LCD15-24D24 LCD15-48S3P3 LCD15-48S05 LCD15-48S12 LCD15-48S15 LCD15-48S24 LCD15-48D05 LCD15-48D12 LCD15-48D15 LCD15-48D24
Input Range
Output Voltage
Output Current @Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load (1)
VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75
VDC 3.3 5 12 15 24 ±5 ±12 ±15 ±24 3.3 5 12 15 24 ±5 ±12 ±15 ±24 3.3 5 12 15 24 ±5 ±12 ±15 ±24
mA 4000 3000 1300 1000 625 ±1500 ±625 ±500 ±315 4000 3000 1300 1000 625 ±1500 ±625 ±500 ±315 4000 3000 1300 1000 625 ±1500 ±625 ±500 ±315
mA 120 90 30 30 12 30 30 30 17 50 65 20 20 10 15 15 25 12 25 35 12 12 10 12 15 20 10
% 84 88 86 88 90 85 87 88 90 86 88 87 88 90 85 88 88 90 86 88 88 88 91 85 89 88 91
µF 12000 6000 1000 660 200 ±3000 ±520 ±330 ±100 12000 6000 1000 660 200 ±3000 ±520 ±330 ±100 12000 6000 1000 660 200 ±3000 ±520 ±330 ±100
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
LCD15 PART NUMBER STRUCTURE
LCD15 - 48 Series Name
Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75
S Output Quantity S: Single
D: Dual
05
-
Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 24: 24 05: ±5 12: ±12 15: ±15 24: ±24
: A: B: C: D: E:
NPUT SPECIFICATIONS Parameter
: None HS: Heat-sink HC: Heat-sink & Clamp
Min.
Typ.
Max.
Unit
9 18 36
12 24 48 30
18 36 75
VDC
Nominal input and Full load
Constant resistive load
Input surge voltage
100ms, max.
12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom)
Referred to –Vin pin
8 14.5 30.5
Conditions
Voltage accuracy Line regulation
Low Line to High Line at Full Load
Load regulation
No Load to Full Load
Cross regulation Voltage adjustability (2)
Asymmetrical load 25%/100% FL Single output
Ripple and noise
Measured by 20MHz bandwidth
mAp-p 9 18 36
Positive logic DC-DC ON (Option) DC-DC OFF Negative logic DC-DC ON (Standard) DC-DC OFF Input current of Ctrl pin Remote off input current
OUTPUT SPECIFICATIONS Parameter
Over load protection Short circuit protection
Assembly Option
12Vin(nom) 24Vin(nom) 48Vin(nom)
Start up time
Temperature coefficient Transient response recovery time Over voltage protection
Option
Conditions
Shutdown voltage
Input filter Remote ON/OFF
HS
Negative logic remote ON/OFF(Standard) Positive logic remote ON/OFF Without Ctrl pin Negative logic remote ON/OFF without Trim pin Without Ctrl & Trim pin Positive logic remote ON/OFF without Trim pin
Operating input voltage range
Input reflected ripple current Start-up voltage
A
Min. Single Dual Single Dual Dual 24Vout Others
VDC
30 30 36 50 100 Pi type Open or 3 ~ 15VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 15VDC 1.0 2.5
-0.5
Typ.
-1.0 -0.2 -0.5 -0.2 -1.0 -5.0 -10 -10
With a 1µF M/C X7R and a 10µF T/C With a 1µF M/C X7R and a 10µF T/C With a 6.8µF/50V X7R MLCC
Single 3.3Vout, 5Vout 12Vout,15Vout 24Vout
75 100 100
With a 4.7µF/50V X7R MLCC for each output With a 1µF M/C X7R and a 10µF T/C for each output
Dual 24Vout others
100 100 -0.02
25% load step change
% of Iout rated; Hiccup mode
3.7 5.6 13.5 16.8 29.1
VDC
mA mA
Unit
+1.0 +0.2 +0.5 +0.2 +1.0 +5.0 +20 +10
% % % % %
mVp-p
+0.02 5.4 7.0 19.6 20.5 32.5
%/ µs
VDC
150 % Continuous, automatics recovery
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
ms
Max.
250 3.3Vout 5Vout 12Vout 15Vout 24Vout
VDC
[email protected]
www.advice.co.il
LCD15 GENERAL SPECIFICATIONS Parameter Isolation voltage
1 minute
Isolation resistance Isolation capacitance Switching frequency Safety approvals
500VDC
Conditions
Min.
Input to Output Input(Output) to Case
Typ.
Max.
1600 1000 1 360
Unit VDC
GΩ pF kHz UL60950-1 EN60950-1 IEC60950-1
1000 440
400
Pending: LCD15-S24, LCD15-D24 Case material Base material Potting material Weight MTBF
Nickel-coated copper FR4 PCB Epoxy (UL94 V-0) 15g (0.53oz) 1.600 x 106 hrs
MIL-HDBK-217F, Full load
ENVIRONMENTAL SPECIFICATIONS Parameter
Conditions
Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance
Min. Without derating With derating
Typ.
-40 +60
Without heat-sink With heat-sink
18.2 15.8
/W
Thermal shock Vibration Relative humidity
MIL-STD-810F MIL-STD-810F 5% to 95% RH
EMC SPECIFICATIONS Parameter EMI (3) ESD Radiated immunity Fast transient (4) Surge (4) Conducted immunity Power frequency magnetic field
Unit
+60 +105 105 +125
-55 Natural convection (20LFM)
Max.
Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Level
Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 3 Vr.m.s 100A/m continuous; 1000A/m 1 second
Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: 1. 2. 3. 4.
Test by minimum input and constant resistive load. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the Trim pin and either +Vout pin or -Vout pin. The standard modules meet EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
LCD15 CHARACTERISTIC CURVE
LCD15-48S05 Derating Curve
LCD15-48S05 Derating Curve With Heat-sink
LCD15-48S05 Efficiency vs. Input Voltage
LCD15-48S05 Efficiency vs. Output Load
MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6
SINGLE +Vin -Vin Ctrl +Vout Trim -Vout
DUAL +Vin -Vin Ctrl +Vout Common -Vout
EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP
TRIM DOWN
6
5
RU 5
RD 4
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
