Transcript
MOP10 MOP10W
SERIES
DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 10.05 WATTS
FEATURES
APPLICATIONS
• REINFORCED INSULATION FOR 300VAC WORKING VOLTAGE • CLEARANCE AND CREEPAGE DISTANCE :6.6mm/2MOOP • 3000VAC INPUT TO OUTPUT 2MOOP ISOLATION • BUILT-IN EMI CLASS A FILTER • LOW LEAKAGE CURRENT UNDER 2µA • ANSI/AAMI ES60601-1, EN60601-1,IEC60601-1 3rd EDITION, UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
3000VAC ISOLATION
UVP
MEDICAL EQUIPMENT TELECOM/DATACOM INDUSTRY CONTROL SYSTEM MEASUREMENT EQUIPMENT SEMICONDUCTOR EQUIPMENT PV POWER SYSTEM IGBT GATE DRIVER
OCP
LOW STANDBY POWER
OVP
SCP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted Model Number MOP10-05S3P3A/B MOP10-05S05A/B MOP10-05S12A/B MOP10-05S15A/B MOP10-05S24A/B MOP10-05D05A/B MOP10-05D12A/B MOP10-05D15A/B MOP10-12S3P3A/B MOP10-12S05A/B MOP10-12S12A/B MOP10-12S15A/B MOP10-12S24A/B MOP10-12D05A/B MOP10-12D12A/B MOP10-12D15A/B MOP10-24S3P3A/B MOP10-24S05A/B MOP10-24S12A/B MOP10-24S15A/B MOP10-24S24A/B MOP10-24D05A/B MOP10-24D12A/B MOP10-24D15A/B MOP10-48S3P3A/B MOP10-48S05A/B MOP10-48S12A/B MOP10-48S15A/B MOP10-48S24A/B MOP10-48D05A/B MOP10-48D12A/B MOP10-48D15A/B
Input Range
Output Voltage
Output Current @ Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load
VDC 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 4.5 ~9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75
VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15
mA 2500 2000 830 670 416 ±1000 ±416 ±333 2500 2000 830 670 416 ±1000 ±416 ±333 2500 2000 830 670 416 ±1000 ±416 ±333 2500 2000 830 670 416 ±1000 ±416 ±333
mA 10 10 20 20 20 25 25 25 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 6 4 4 4 4 4 4 4 4
% 80 84 86.5 87 85.5 83 85.5 86.5 83 85.5 88 89 89 84 89 88 83 86.5 89 89 89 85 89 88 82.5 86.5 89 89 88.5 85 88 88
µF 3000 2500 430 350 125 ± 1440 ± 250 ± 180 3000 2500 430 350 125 ± 1440 ± 250 ± 180 3000 2500 430 350 125 ± 1440 ± 250 ± 180 3000 2500 430 350 125 ± 1440 ± 250 ± 180
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
MOP06 MOP06W Model Number MOP10-24S3P3WA/B MOP10-24S05WA/B MOP10-24S12WA/B MOP10-24S15WA/B MOP10-24S24WA/B MOP10-24D05WA/B MOP10-24D12WA/B MOP10-24D15WA/B MOP10-48S3P3WA/B MOP10-48S05WA/B MOP10-48S12WA/B MOP10-48S15WA/B MOP10-48S24WA/B MOP10-48D05WA/B MOP10-48D12WA/B MOP10-48D15WA/B
Input Range
Output Voltage
Output Current @ Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load
VDC 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75
VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15
mA 2500 2000 830 670 416 ±1000 ±416 ±333 2500 2000 830 670 416 ±1000 ±416 ±333
mA 6 6 6 6 6 6 6 6 4 4 4 4 4 4 4 4
% 83 86.5 89 89 89 85 89 88 82.5 86.5 89 89 88.5 85 88 88
µF 3000 2500 430 350 125 ± 1440 ± 250 ± 180 3000 2500 430 350 125 ± 1440 ± 250 ± 180
P
T
Remote On/Off Option
Trim Option
PART NUMBER STRUCTURE
MOP10
-
Series name
48
S
05
Input Voltage (VDC)
Output Quantity
Output Voltage (VDC)
05: 12: 24: 48:
4.5~9 9~18 18~36 36~75
S: Single
D: Dual
MOP10 Series name
-
3P3: 05: 12: 15: 24: 05: 12: 15:
A
-
Input Range
Pin Connection Option
3.3 5 12 15 24 ±5 ±12 ±15
: 2:1 W: 4:1
A: A type(Standard) B: B type
48
S
05
W
A
Input Voltage (VDC)
Output Quantity
Output Voltage (VDC)
Input Range
Pin Connection Option
24: 9~36 48: 18~75
S: Single
: 2:1 W: 4:1
A: A type(Standard) B: B type
D: Dual
3P3: 05: 12: 15: 24:
3.3 5 12 15 24
: No On/Off control P: Remote On/Off (Only for B type Pin connection)
-
: No Trim T: Trim (Only for B type Pin connection)
P
T
Remote On/Off Option
Trim Option
: No On/Off control P: Remote On/Off (Only for B type Pin connection)
: No Trim T: Trim (Only for B type Pin connection)
05: ±5 12: ±12 15: ±15
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
MOP06 MOP06W INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
2:1
(W) 4:1 Start-up voltage
2:1
(W) 4:1 Shutdown voltage
2:1
(W) 4:1 Start up time Input surge voltage
Input filter Remote ON/OFF (Only for B-type Pin connection option)
Constant resistive load 3 second, max.
2:1
3 second, max.
(W) 4:1
Voltage accuracy Line regulation Load regulation Cross regulation Voltage adjustability
Conditions Low Line to High Line at Full Load No Load to Full Load Asymmetrical load 25%/100% FL Single output
(Only for B-type Pin connection option)
Ripple and noise
Dual output Measured by 20MHz bandwidth With a 10µF/25V X7R MLCC With a 4.7µF/50V X7R MLCC
Temperature coefficient Transient response recovery time Over voltage protection
Typ.
Max.
4.5 9 18 36 9 18
5 12 24 48 24 48
9 18 36 75 36 75 4.5 9 18 36 9 18
-0.5
Min.
Single Dual Single Dual Dual 3.3Vout, 5Vout, 12Vout 15Vout, 24Vout ±5Vout, ±12Vout, ±15Vout
Typ.
-1.0 -0.2 -0.5 -0.2 -1.0 -5.0 -10 -10 -10
3.3Vout, 5Vout 12Vout, 15Vout 24Vout
% of Iout rated; Hiccup mode
VDC
VDC
ms
Max.
Unit
+1.0 +0.2 +0.5 +0.2 +1.0 +5.0 +10 +20 +10
%
3.7 5.6 13.5 18.3 29.1 5.6 13.5 17.0
% % % % % mVp-p
+0.02 5 7.0 16 22.0 34.5 7.0 18.2 22.0
%/ºC µs
VDC
VDC
150 % Continuous, automatics recovery
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
VDC
VDC
250
Dual
VDC
VDC
30 40 50 -0.02
3.3Vout 5Vout 12Vout 15Vout 24Vout 5Vout 12Vout 15Vout
Unit
16 25 VDC 50 100 50 VDC 100 Pi type OPEN or 0 ~ 1.2VDC 2.2 ~ 12VDC 1 mA 2.5 mA
25% load step change
Single
Over load protection Short circuit protection
Min.
4 8 16 33 8 16 30 30
DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current
Referenced to -Vin pin
OUTPUT SPECIFICATIONS Parameter
5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 24Vin(nom) 48 Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom)
[email protected]
www.advice.co.il
MOP06 MOP06W GENERAL SPECIFICATIONS Parameter Isolation voltage Isolation capacitance Leakage current Switching frequency Clearance/Creepage Safety approvals
Case material Base material Potting material Weight MTBF
Conditions
1 minute
Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity
270 6.6
MIL-HDBK-217F, Full load
ESD Radiated immunity Fast transient (2) Surge (2) Conducted immunity Power frequency magnetic field
Conditions
Typ.
Max.
Unit
VAC pF µA 300 kHz mm ANSI/AAMI ES60601-1 EN60601-1 IEC60601-1 UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Silicone (UL94 V-0) 14g (0.48oz) 3.849 x 106 hrs
Min.
Without derating With derating
12
17 2 330
Typ.
Max.
-40 +77 -55
Natural convection (20LFM)
EMC SPECIFICATIONS Parameter EMI (1)
3000
240VAC,60Hz
ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature
Min.
Input to Output
ºC ºC ºC ºC/W MIL-STD-810F MIL-STD-810F 5% to 95% RH
18
Conditions
Unit
+77 +105 +125
Level
EN55011,EN55022 and FCC Part 18 Air ± 8kV EN61000-4-2 Contact ± 6kV EN61000-4-3 10 V/m EN61000-4-4 ± 2kV EN61000-4-5 ± 2kV EN61000-4-6 10 Vr.m.s EN61000-4-8 100A/m continuous; 1000A/m 1 second
Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: The MOP10 (W) series can meet EMI Class A with no external filter. And Class B only with external components. For further information, please contact with P-DUKE. 2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The MOP10-05 recommended an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 1000µF/25V). And a reverse diode (Vishay V10P45) to connect in parallel. The MOP10-12&24 recommended an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 470µF/50V). The MOP10-48 recommended an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 330µF/100V). CAUTION: This power module is not internally fused. An input line fuse must always be used. 1.
CHARACTERISTIC CURVE
MOP10-48S05WA Derating Curve
MOP10-48S05WA Efficiency vs. Input Voltage
MOP10-48S05WA Efficiency vs. Output Load
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
MOP06 MOP06W MECHANICAL DRAWING A TYPE PIN CONNECTION PIN 1 11 12 13 15 23 24
1. 2. 3. 4.
SINGLE + Vin No pin -Vout +Vout No pin - Vin - Vin
DUAL + Vin Common No pin -Vout +Vout - Vin - Vin
All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) Pin pitch tolerance ±0.01 (0.25) Pin dimension tolerance ±0.004 (0.1)
B TYPE PIN CONNECTION PIN 1 2 10 11 14 16 22 23
1. 2. 3. 4.
All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) Pin pitch tolerance ±0.01 (0.25) Pin dimension tolerance ±0.004 (0.1)
SINGLE DUAL CtrlL (Option) / No pin* Ctrl (Option) / No pin* - Vin - Vin Trim (Option) / No pin* Trim (Option) / No pin* No pin / NC ** -Vout +Vout +Vout -Vout Common +Vin +Vin +Vin +Vin * If don’t choose Ctrl or Trim option, there is no pin on the corresponding pin number. ** Pin 11 is “No pin” for MOP10-□□S□□□B-T MOP10-□□S□□□B-PT Pin 11 is “NC” for MOP10-□□S□□□B MOP10-□□S□□□B-P
EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. ( ) for dual output trim. TRIM UP
TRIM DOWN
16(11)
10(10)
RU 10(10)
RD 14(14)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
