Transcript
PDL03 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 3 Watts
FEATURES
APPLICATIONS
• NO MINIMUM LOAD REQUIRED • UP TO 3000VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE： ：0.86 X 0.36 X 0.44 INCH • LOW OUTPUT RIPPLE AND NOISE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
3000VDC ISOLATION
1600VDC ISOLATION
REMOTE CONTROL
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
SCP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number PDL03-05S3P3 PDL03-05S05 PDL03-05S09 PDL03-05S12 PDL03-05S15 PDL03-05D05 PDL03-05D12 PDL03-05D15 PDL03-12S3P3 PDL03-12S05 PDL03-12S09 PDL03-12S12 PDL03-12S15 PDL03-12D05 PDL03-12D12 PDL03-12D15 PDL03-24S3P3 PDL03-24S05 PDL03-24S09 PDL03-24S12 PDL03-24S15 PDL03-24D05 PDL03-24D12 PDL03-24D15 PDL03-48S3P3 PDL03-48S05 PDL03-48S09 PDL03-48S12 PDL03-48S15 PDL03-48D05 PDL03-48D12 PDL03-48D15
otherwise noted
Input Range
Output Voltage
Output Current @Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load
VDC 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75
VDC 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15
mA 700 600 333 250 200 ±300 ±125 ±100 700 600 333 250 200 ±300 ±125 ±100 700 600 333 250 200 ±300 ±125 ±100 700 600 333 250 200 ±300 ±125 ±100
mA 45 45 55 55 55 55 60 60 25 25 30 30 30 30 30 30 16 16 17 18 18 17 18 18 10 10 11 12 12 12 12 12
% 75 79 80 81 82 78 81 81 77 81 80 83 83 82 83 83 76 82 82 83 84 80 83 85 74 79 80 81 82 79 82 83
µF 3300 1680 1000 820 680 ±1000 ±470 ±330 3300 1680 1000 820 680 ±1000 ±470 ±330 3300 1680 1000 820 680 ±1000 ±470 ±330 3300 1680 1000 820 680 ±1000 ±470 ±330
[email protected]
www.advice.co.il
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
PDL03 PART NUMBER STRUCTURE
PDL03 - 48 Series Name
S
Input Voltage (VDC) 05: 4.5~9 12: 9~18 24:18~16 48:36~75
Output Quantity S:Single
D: Dual
05
H
Output Isolation Voltage Option (VDC) 3P3: 3.3 : Standard type 05: 5 1600VDC isolation 09: 9 H: 3000VDC isolation 12:12 15:15 05:± 5 12:±12 15:±15
INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
Start up time
Constant resistive load
Input surge voltage
100 ms, max.
5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom)
Input reflected ripple current
Input filter (1) Remote ON/OFF
Application circuit DC-DC ON
OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation
Max.
Unit
5 12 24 48 30 30
9 18 36 75
VDC
ms
2
VDC
400 150 mAp-p 380 170 Capacitor type Open or high impedance 3 4 mA 2.5 mA
DC-DC OFF
Conditions Low Line to High Line at Full Load No Load to Full Load
Load regulation Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection
Typ.
4.5 9 18 36
15 36 50 100
DC-DC ON DC-DC OFF Remote off input current
Ctrl pin applied current via 1kΩ
Min.
5% Load to 100% Full Load Asymmetrical load 25%/100% FL 20MHz bandwidth
Min. Single Dual Single Dual
25% load step change
Typ.
-1.0 -0.2 -1.0 -1.0 -0.5 -5.0
Max.
Unit
+1.0 +0.2 +1.0 +1.0 +0.5 +5.0
% %
% % 50 mVp-p -0.02 +0.02 %/℃ 500 µs Continuous, automatics recovery
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
%
[email protected]
www.advice.co.il
PDL03 GENERAL SPECIFICATIONS Parameter
Conditions
Isolation voltage
1 minute
Isolation resistance Isolation capacitance
500VDC
Switching frequency Safety approvals
Full load to minimum load
Case material Base material Potting material Weight MTBF
Input to Output
Min.
Standard Type Suffix ”H”
MIL-HDBK-217F
Conditions
Storage temperature range Thermal shock Vibration Relative humidity
EMC SPECIFICATIONS Parameter
-40 +71 -55
Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
pF
kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic None Silicone (UL94 V-0) 4.8g (0.17oz) 4.871 x 106 hrs
Min. Without derating With derating
Unit GΩ
200 40 100
Operating ambient temperature
Max.
VDC
Standard Type Suffix ”H”
ENVIRONMENTAL SPECIFICATIONS Parameter
EMI(2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Power frequency magnetic field
Typ.
1600 3000 1
Typ.
Max.
Unit
+71 +100 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH
Level
Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ±1kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second
Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: 1.
It will not damage the device without installing external input capacitors. It’s helpful to reduce input reflected ripple current if external input capacitors are installed. 2. The standard module meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. 3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
PDL03-48S05 Derating Curve
PDL03-48S05 Efficiency vs. Input Voltage
PDL03-48S05 Efficiency vs. Output Load
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
PDL03 MECHANICAL DRAWING PIN CONNECTION PIN SINGLE DUAL 1 -Vin -Vin 2 +Vin +Vin 3 Ctrl Ctrl 5 NC*/No pin** NC*/No pin** 6 +Vout +Vout 7 -Vout Common 8 NC -Vout *NC pin for standard type model. **No pin for 3kVDC isolation model (suffix “H”). 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
