Transcript
PDL06W SERIES DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 6 Watts
FEATURES
APPLICATIONS
• NO MINIMUM LOAD REQUIRED • UP TO 3000VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE： ：0.86 X 0.36 X 0.44 INCH • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
3000VDC ISOLATION
1600VDC ISOLATION
REMOTE CONTROL
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
SCP
LOW STANDBY POWER
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number
otherwise noted
Input Range
Output Voltage
Output Current @Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load
VDC 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75
VDC 3.3 5 9 12 15 24 ±5 ±12 ±15 3.3 5 9 12 15 24 ±5 ±12 ±15
mA 1500 1200 666 500 400 250 ±600 ±250 ±200 1500 1200 666 500 400 250 ±600 ±250 ±200
mA 4 4 4 4 4 4 6 6 8 4 4 4 4 4 4 6 6 8
% 81 84 86 87 88 87 84 87 87 81 84 85 87 87 87 84 87 87
µF 2200 1100 680 470 470 180 ±680 ±330 ±180 2200 1100 680 470 470 180 ±680 ±330 ±180
PDL06-24S3P3W PDL06-24S05W PDL06-24S09W PDL06-24S12W PDL06-24S15W PDL06-24S24W PDL06-24D05W PDL06-24D12W PDL06-24D15W PDL06-48S3P3W PDL06-48S05W PDL06-48S09W PDL06-48S12W PDL06-48S15W PDL06-48S24W PDL06-48D05W PDL06-48D12W PDL06-48D15W
PART NUMBER STRUCTURE
PDL06 - 48 Series Name
Input Voltage (VDC) 24: 9~36 48:18~75
S Output Quantity S:Single
D: Dual
05 W Output Voltage (VDC) 3P3: 3.3 05: 5 09: 9 12:12 15:15 24:24
H
Input Range
Case & Isolation Option
4:1
: Standard type Plastic case 1600VDC isolation H: Plastic case 3000VDC isolation M: Metal case 1600VDC isolation
05:± 5 12:±12 15:±15
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
PDL06W INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range Start up time
Constant resistive load
Input surge voltage
1 second, max.
24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom)
Input reflected ripple current Input filter Remote ON/OFF
Application circuit DC-DC ON
OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over load protection Short circuit protection
Low Line to High Line at Full Load No Load to Full Load
VDC ms VDC
20 mAp-p 40 Capacitor type Open or high impedance 3 4 mA 2.5 mA
2
Typ.
-1.0 -0.2 -0.5 -1.0 -5.0
Max.
Unit
+1.0 +0.2 +0.5 +1.0 +5.0
% %
50 75
% % mVp-p
-0.02
+0.02 %/ 250 µs 180 % Continuous, automatics recovery
25% load step change % of Iout rated; Hiccup mode
Conditions
1 minute
Input to Output
Standard Type Suffix ”H” Suffix ”M” Suffix ”M”
500VDC
Min.
Typ.
522
Case material
Standard Type Suffix ”H” Suffix ”M”
Base material Potting material Weight
MIL-HDBK-217F
Standard Type Suffix ”H” Suffix ”M” Standard Type Suffix ”H” Suffix ”M”
Max.
1600 3000 1600 1000 1
GΩ
580
50 50 50 638
pF
kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Copper None Silicone (UL94 V-0) 4.8g (0.17oz) 4.8g (0.17oz) 5.9g (0.21oz) 2.928 x 106 hrs 2.928 x 106 hrs 3.161 x 106 hrs
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
Unit VDC
Standard Type Suffix ”H” Suffix ”M”
Switching frequency Safety approvals
MTBF
Unit
36 75
Min. Single Dual Dual 3.3Vout 5Vout, 9Vout 12Vout, 15Vout 24Vout
Asymmetrical load 25%/100% FL 20MHz bandwidth
Input (Output) to Case Isolation resistance Isolation capacitance
Max.
24 48 30 30
DC-DC OFF
Conditions
GENERAL SPECIFICATIONS Parameter Isolation voltage
Typ.
9 18
50 100
DC-DC ON DC-DC OFF Remote off input current
Ctrl pin applied current via 1kΩ
Min.
[email protected]
www.advice.co.il
PDL06W ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature
Conditions Standard type Suffix “H” Suffix “M”
Min. Without derating With derating Without derating With derating Without derating With derating
Storage temperature range Thermal shock Vibration Relative humidity
EMC SPECIFICATIONS Parameter EMI(1) ESD Radiated immunity Fast transient (2) Surge (2) Conducted immunity Power frequency magnetic field
Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Typ.
-40 +71 -40 +71 -40 +75 -55
Max.
Unit
+71 +100 +71 +100 +75 +100 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH
Level Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Air ± 8kV and Contact ± 6kV 20 V/m ± 2kV ±2kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second
Note: 1. 2.
The standard module meets EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter Power Mate suggested: The PDL06-24W recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ70A, 70V, 3000Watt peak pulse power) to connect in parallel. The PDL06-48W recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ120A, 120V, 3000Watt peak pulse power) to connect in parallel. CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
PDL06-48S05W Derating Curve
PDL06-48S05WM Derating Curve
PDL06-48S05W Efficiency vs. Input Voltage
PDL06-48S05W Efficiency vs. Output Load
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
PDL06W MECHANICAL DRAWING Standard type, Suffix “H”
PIN CONNECTION PIN SINGLE DUAL 1 -Vin -Vin 2 +Vin +Vin 3 Ctrl Ctrl 5 NC*/No pin** NC*/No pin** 6 +Vout +Vout 7 -Vout Common 8 NC -Vout *NC pin for standard type model. **No pin for 3kVDC isolation model (suffix “H”). 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Suffix “M”
PIN CONNECTION PIN SINGLE 1 -Vin 2 +Vin 3 Ctrl 5 NC 6 +Vout 7 -Vout 8 NC 9 Case 10 Stand off 11 Stand off 12 Case
DUAL -Vin +Vin Ctrl NC +Vout Common -Vout Case Stand off Stand off Case
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
