Spec. Sdh02

Transcript

SDS02 SDH02 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 2.01 WATTS FEATURES APPLICATIONS • ULTRA SMALL SMD AND DIP PACKAGE, 0.52 x 0.36x 0.40 INCH WITH REGULATED • SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER PROCESS ACCORDING IPC J-STD-020D • NO MINIMUM LOAD REQUIRED • CONTINUOUS SHORT CIRCUIT PROTECTION • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OPTION • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1 • CE MARKED • COMPLIANT TO RoHS II & REACH • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • MEASUREMENT EQUIPMENT • SEMICONDUCTOR EQUIPMENT TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number SDS(H)02-05S3P3 SDS(H)02-05S05 SDS(H)02-05S12 SDS(H)02-05S15 SDS(H)02-05S24 SDS(H)02-05D05 SDS(H)02-05D12 SDS(H)02-05D15 SDS(H)02-12S3P3 SDS(H)02-12S05 SDS(H)02-12S12 SDS(H)02-12S15 SDS(H)02-12S24 SDS(H)02-12D05 SDS(H)02-12D12 SDS(H)02-12D15 SDS(H)02-24S3P3 SDS(H)02-24S05 SDS(H)02-24S12 SDS(H)02-24S15 SDS(H)02-24S24 SDS(H)02-24D05 SDS(H)02-24D12 SDS(H)02-24D15 SDS(H)02-48S3P3 SDS(H)02-48S05 SDS(H)02-48S12 SDS(H)02-48S15 SDS(H)02-48S24 SDS(H)02-48D05 SDS(H)02-48D12 SDS(H)02-48D15 Input Range VDC 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 Output Voltage VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 Output Current @Full Load mA 500 400 167 134 83 ±200 ±83 ±67 500 400 167 134 83 ±200 ±83 ±67 500 400 167 134 83 ±200 ±83 ±67 500 400 167 134 83 ±200 ±83 ±67 Input Current @ No Load mA 34 34 42 42 42 42 42 42 24 24 28 28 28 28 28 28 10 10 14 14 14 14 14 14 7 7 8 8 8 8 8 8 Efficiency % 77 81 84 85 85 81 85 85 78 81 84 85 85 81 85 86 78 81 84 85 85 81 85 86 77 81 84 85 85 81 85 85 Maximum Capacitor Load µF 2200 1000 550 440 200 ±660 ±330 ±220 2200 1000 550 440 200 ±660 ±330 ±220 2200 1000 550 440 200 ±660 ±330 ±220 2200 1000 550 440 200 ±660 ±330 ±220 Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910 [email protected] www.advice.co.il SDS02 SDH02 PART NUMBER STRUCTURE SDS02 - 48 Series Name SDS: SMD type SDH: DIP type Input Voltage (VDC) 05: 4.5~9 12: 9~18 24:18~36 48:36~75 S 05 H Output Quantity Output Voltage (VDC) 3P3: 3.3 05: 5 12:12 15:15 24:24 Isolation Option S:Single D: Dual
: Standard type 1600VDC isolation H: 3000VDC isolation 05:± 5 12:±12 15:±15 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up time 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Constant resistive load Input surge voltage 1 second, max. Input reflected ripple current(1) Input filter Remote ON/OFF Ctrl pin applied current via 1kΩ Application circuit DC-DC ON OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Typ. Max. 4.5 9 18 36 5 12 24 48 5 5 9 18 36 75 10 10 15 25 50 100 30 30 30 30 Capacitor type Open or high impedance 2.0 3.0 4.0 2.5 Unit VDC ms VDC mAp-p mA mA DC-DC OFF Conditions Low Line to High Line at Full Load No Load to Full Load 10% Load to 90% Load Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection DC-DC ON DC-DC OFF Remote off input current Min. Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth Single Dual Single Dual Dual 25% load step change Min. Typ. -1.0 -0.2 -1.0 -1.0 -0.5 -0.8 -5.0 Max. Unit +1.0 +0.2 +1.0 +1.0 +0.5 +0.8 +5.0 % % % mVp-p -0.02 +0.02 %/ 250 µs Continuous, automatics recovery 50 Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910 % [email protected] www.advice.co.il SDS02 SDH02 GENERAL SPECIFICATIONS Parameter Isolation voltage Isolation resistance Isolation capacitance Conditions Min. Standard Suffix ”H” 1 minute 500VDC MIL-HDBK-217F, Full load Operating ambient temperature Storage temperature range Thermal shock Vibration Relative humidity Lead-free reflow solder process Moisture sensitivity level(MSL) Conditions GΩ EMC SPECIFICATIONS Parameter -40 -55 Conditions EN61000-4-2 Radiated immunity Fast transient (2) Surge (2) Conducted immunity Power frequency magnetic field EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 Typ. Max. Unit 85 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH IPC J-STD-020D IPC J-STD-033B Level 2 Level EN55022 ESD pF kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Silicone (UL94 V-0) 2.7g (0.10oz) 6.670 x 106 hrs Min. Without derating Unit VDC 50 50 100 ENVIRONMENTAL SPECIFICATIONS Parameter EMI (1) Max. Standard Suffix ”H” Switching frequency Safety meets Case material Base material Potting material Weight MTBF Typ. 1600 3000 1 Class A, Class B Air ± 8kV Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. The standard module meets EMI Class A or Class B and input reflected ripple current only with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE SDS(H)02-48S05 Derating Curve SDS(H)02-48S05 Efficiency vs. Input Voltage SDS(H)02-48S05 Efficiency vs. Output Current Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910 [email protected] www.advice.co.il SDS02 SDH02 MECHANICAL DRAWING SDS02 PIN CONNECTION PIN SINGLE 1 +Vin 2 -Vin 4 Ctrl 5 NC 6 -Vout 7 +Vout DUAL +Vin -Vin Ctrl -Vout Common +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) SDH02 Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910 [email protected] www.advice.co.il