Transcript
SDS01 SDH01
SERIES
DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 1.08 WATTS
FEATURES
APPLICATIONS
• ULTRA SMALL SMD AND DIP PACKAGE, 0.52 x 0.36x 0.40 INCH WITH REGULATED • SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER PROCESS ACCORDING IPC J-STD-020D • NO MINIMUM LOAD REQUIRED • CONTINUOUS SHORT CIRCUIT PROTECTION • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OPTION • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1 • CE MARKED • COMPLIANT TO RoHS II & REACH
3000VDC ISOLATION
1600VDC ISOLATION
REMOTE CONTROL
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • MEASUREMENT EQUIPMENT • SEMICONDUCTOR EQUIPMENT
SCP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number SDS(H)01-05S3P3 SDS(H)01-05S05 SDS(H)01-05S12 SDS(H)01-05S15 SDS(H)01-05S24 SDS(H)01-05D05 SDS(H)01-05D12 SDS(H)01-05D15 SDS(H)01-12S3P3 SDS(H)01-12S05 SDS(H)01-12S12 SDS(H)01-12S15 SDS(H)01-12S24 SDS(H)01-12D05 SDS(H)01-12D12 SDS(H)01-12D15 SDS(H)01-24S3P3 SDS(H)01-24S05 SDS(H)01-24S12 SDS(H)01-24S15 SDS(H)01-24S24 SDS(H)01-24D05 SDS(H)01-24D12 SDS(H)01-24D15 SDS(H)01-48S3P3 SDS(H)01-48S05 SDS(H)01-48S12 SDS(H)01-48S15 SDS(H)01-48S24 SDS(H)01-48D05 SDS(H)01-48D12 SDS(H)01-48D15
Input Range
Output Voltage
VDC 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75
VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15
Output Current @Full Load mA 300 200 90 70 45 ±100 ±45 ±35 300 200 90 70 45 ±100 ±45 ±35 300 200 90 70 45 ±100 ±45 ±35 300 200 90 70 45 ±100 ±45 ±35
Input Current @ No Load mA 20 25 30 30 30 30 30 30 10 10 13 13 15 15 15 15 6 6 6 6 8 8 8 8 5 5 5 5 5 5 5 5
otherwise noted
Efficiency % 78 80 83 83 82 81 82 82 78 80 83 83 82 80 82 82 78 81 83 83 82 80 82 82 79 80 82 83 82 80 82 81
Maximum Capacitor Load µF 1680 820 470 330 160 ±470 ±330 ±220 1680 820 470 330 160 ±470 ±330 ±220 1680 820 470 330 160 ±470 ±330 ±220 1680 820 470 330 160 ±470 ±330 ±220
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
SDS01 SDH01 PART NUMBER STRUCTURE
SDS01 - 48 Series Name
SDS: SMD type SDH: DIP type
Input Voltage (VDC) 05: 4.5~9 12: 9~18 24:18~36 48:36~75
S
05
H
Output Quantity
Output Voltage (VDC) 3P3: 3.3 05: 5 12:12 15:15 24:24
Isolation Option
S:Single
D: Dual
: Standard type 1600VDC isolation H: 3000VDC isolation
05:± 5 12:±12 15:±15
INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
Start up time
5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom)
Constant resistive load
Input surge voltage 1 second, max. Input reflected ripple current(1)
Input filter Remote ON/OFF Ctrl pin applied current via 1kΩ
Application circuit DC-DC ON
OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation
Typ.
Max.
4.5 9 18 36
5 12 24 48 5 5
9 18 36 75 10 10 15 25 50 100
10 10 10 10 Capacitor type Open or high impedance 2.0 3.0 4.0 2.5
Unit VDC
ms
VDC
mAp-p
mA mA
DC-DC OFF
Conditions Low Line to High Line at Full Load No Load to Full Load 10% Load to 90% Load
Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection
DC-DC ON DC-DC OFF Remote off input current
Min.
Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth
Single Dual Single Dual Dual
25% load step change
Min.
Typ.
-1.0 -0.2 -1.0 -1.0 -0.5 -0.8 -5.0
Max.
Unit
+1.0 +0.2 +1.0 +1.0 +0.5 +0.8 +5.0
% %
% mVp-p -0.02 +0.02 %/ 500 µs Continuous, automatics recovery 30
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
%
[email protected]
www.advice.co.il
SDS01 SDH01 GENERAL SPECIFICATIONS Parameter Isolation voltage Isolation resistance Isolation capacitance
Conditions
Min.
Standard Suffix ”H”
1 minute 500VDC
MIL-HDBK-217F, Full load
Operating ambient temperature
Conditions
GΩ
-40 +90 -55
Storage temperature range Thermal shock Vibration Relative humidity Lead-free reflow solder process Moisture sensitivity level(MSL)
EMC SPECIFICATIONS Parameter
Conditions EN61000-4-2
Radiated immunity Fast transient (2) Surge (2) Conducted immunity Power frequency magnetic field
EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Typ.
Max.
Unit
+90 +105 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH IPC J-STD-020D IPC J-STD-033B Level 2
Level
EN55022
ESD
pF
kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Silicone (UL94 V-0) 2.7g (0.10oz) 8.534 x 106 hrs
Min.
Without derating With derating
Unit VDC
50 50 100
ENVIRONMENTAL SPECIFICATIONS Parameter
EMI (1)
Max.
Standard Suffix ”H”
Switching frequency Safety meets
Case material Base material Potting material Weight MTBF
Typ.
1600 3000 1
Class A, Class B Air ± 8kV Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second
Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: 1. 2.
The standard module meets EMI Class A or Class B and input reflected ripple current with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
SDS(H)01-48S05 Derating Curve
SDS(H)01-48S05 Efficiency vs. Input Voltage
SDS(H)01-48S05 Efficiency vs. Output Current
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
SDS01 SDH01 MECHANICAL DRAWING SDS01
PIN CONNECTION PIN SINGLE 1 +Vin 2 -Vin 4 Ctrl 5 NC 6 -Vout 7 +Vout
DUAL +Vin -Vin Ctrl -Vout Common +Vout
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
SDH01
Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910
[email protected]
www.advice.co.il
