Spec. Sds01w

Transcript

SDS01W SDH01W SERIES DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 1.08WATTS FEATURES APPLICATIONS • ULTRA SMALL SMD AND DIP PACKAGE, 0.52 x 0.36x 0.40 INCH WITH REGULATED • SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER PROCESS ACCORDING IPC J-STD-020D • NO MINIMUM LOAD REQUIRED • CONTINUOUS SHORT CIRCUIT PROTECTION • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OPTION • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1 • CE MARKED • COMPLIANT TO RoHS II & REACH 3000VDC ISOLATION 1600VDC ISOLATION REMOTE CONTROL OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • MEASUREMENT EQUIPMENT • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Input Range Model Number Output Voltage VDC 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 SDS(H)01-12S3P3W SDS(H)01-12S05W SDS(H)01-12S12W SDS(H)01-12S15W SDS(H)01-12S24W SDS(H)01-12D05W SDS(H)01-12D12W SDS(H)01-12D15W SDS(H)01-24S3P3W SDS(H)01-24S05W SDS(H)01-24S12W SDS(H)01-24S15W SDS(H)01-24S24W SDS(H)01-24D05W SDS(H)01-24D12W SDS(H)01-24D15W SDS(H)01-48S3P3W SDS(H)01-48S05W SDS(H)01-48S12W SDS(H)01-48S15W SDS(H)01-48S24W SDS(H)01-48D05W SDS(H)01-48D12W SDS(H)01-48D15W VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 Output Current @Full Load mA 300 200 90 70 45 ±100 ±45 ±35 300 200 90 70 45 ±100 ±45 ±35 300 200 90 70 45 ±100 ±45 ±35 Input Current @ No Load mA 15 20 20 20 25 25 25 25 10 10 10 10 10 10 10 10 5 5 5 6 6 6 6 6 Efficiency % 77 79 81 81 80 77 80 81 76 78 81 81 80 77 80 81 75 78 81 81 80 77 80 81 Maximum Capacitor Load µF 1680 820 470 330 160 ±470 ±330 ±220 1680 820 470 330 160 ±470 ±330 ±220 1680 820 470 330 160 ±470 ±330 ±220 PART NUMBER STRUCTURE SDS01 - 48 Series Name SDS: SMD type SDH: DIP type S 05 W Input Output Output Voltage Quantity Voltage (VDC) (VDC) 12: 4.5~18 S:Single 3P3:3.3 24: 9~36 05:5 48:18~75 12:12 15:15 24:24 D:Dual Input Range 4:1 H Isolation Option
: 1600VDC Isolation H: 3000VDC Isolation 05:±5 12:±12 15:±15 Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910 [email protected] www.advice.co.il SDS01W SDH01W INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up time 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Constant resistive load Input surge voltage 1 second, max. Input reflected ripple current(1) Input filter Remote ON/OFF DC-DC ON DC-DC OFF Remote off input current Ctrl pin applied current via 1kΩ Application circuit DC-DC ON Conditions Low Line to High Line at Full Load No Load to Full Load 10% Load to 90% Load Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth Isolation resistance Isolation capacitance Single Dual Single Dual Dual Conditions Standard Suffix ”H” 1 minute 500VDC 15 10 5 Capacitor type Open or high impedance 2.0 3.0 4.0 2.5 Min. Typ. -1.0 -0.2 -1.0 -1.0 -0.5 -0.8 -5.0 Unit VDC ms VDC mAp-p mA mA Max. Unit +1.0 +0.2 +1.0 +1.0 +0.5 +0.8 +5.0 % % Max. Unit % % mVp-p -0.02 +0.02 %/℃ 500 µs Continuous, automatics recovery Min. Typ. 1600 3000 1 VDC GΩ 50 50 100 MIL-HDBK-217F, Full load ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature 18 36 75 10 10 25 50 100 Standard Suffix ”H” Switching frequency Design meets Case material Base material Potting material Weight MTBF Max. 12 24 48 5 5 30 25% load step change GENERAL SPECIFICATIONS Parameter Isolation voltage Typ. 4.5 9 18 DC-DC OFF OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Min. Conditions Without derating With derating Storage temperature range Thermal shock Vibration Relative humidity Lead-free reflow solder process Moisture sensitivity level(MSL) Min. -40 +90 -55 Typ. Max. [email protected] Unit +90 ℃ +105 +125 ℃ MIL-STD-810F MIL-STD-810F 5% to 95% RH IPC J-STD-020D IPC J-STD-033B Level 2 Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910 pF kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Silicone (UL94 V-0) 2.7g (0.10oz) 8.401 x 106 hrs www.advice.co.il SDS01W SDH01W EMC SPECIFICATIONS Parameter EMI (1) Conditions Level EN55022 ESD EN61000-4-2 Radiated immunity Fast transient (2) Surge (2) Conducted immunity Power frequency magnetic field EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 Class A, Class B Air ± 8kV Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. The standard module meet EMI Class A or Class B and input reflected ripple current with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE SDS(H)01-48S05W Derating Curve SDS(H)01-48S05W Efficiency vs. Input Voltage SDS(H)01-48S05W Efficiency vs. Output Current MECHANICAL DRAWING SDS01W: SMD TYPE PIN CONNECTION PIN SINGLE 1 +Vin 2 -Vin 4 Ctrl 5 NC 6 -Vout 7 +Vout DUAL +Vin -Vin Ctrl -Vout Common +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) SDH01W: DIP TYPE Advice Electronics Ltd Advice Building,16 Atir Yeda St., Kfar Saba, 4464321, Israel Tel:+972-3-9000910 [email protected] www.advice.co.il