Transcript
SDS02W SDH02W
SERIES
DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 2.01 WATTS
FEATURES
APPLICATIONS
• ULTRA SMALL SMD AND DIP PACKAGE, 0.52 x 0.36x 0.40 INCH WITH REGULATED • SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER PROCESS ACCORDING IPC J-STD-020D • NO MINIMUM LOAD REQUIRED • CONTINUOUS SHORT CIRCUIT PROTECTION • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OPTION • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1 • CE MARKED • COMPLIANT TO RoHS II & REACH
3000VDC ISOLATION
1600VDC ISOLATION
REMOTE CONTROL
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • MEASUREMENT EQUIPMENT • SEMICONDUCTOR EQUIPMENT
SCP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Input Range
Model Number
Output Voltage
VDC 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 4.5 ~ 18 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75
SDS(H)02-12S3P3W SDS(H)02-12S05W SDS(H)02-12S12W SDS(H)02-12S15W SDS(H)02-12S24W SDS(H)02-12D05W SDS(H)02-12D12W SDS(H)02-12D15W SDS(H)02-24S3P3W SDS(H)02-24S05W SDS(H)02-24S12W SDS(H)02-24S15W SDS(H)02-24S24W SDS(H)02-24D05W SDS(H)02-24D12W SDS(H)02-24D15W SDS(H)02-48S3P3W SDS(H)02-48S05W SDS(H)02-48S12W SDS(H)02-48S15W SDS(H)02-48S24W SDS(H)02-48D05W SDS(H)02-48D12W SDS(H)02-48D15W
VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15
Output Current @Full Load mA 500 400 167 134 83 ±200 ±83 ±67 500 400 167 134 83 ±200 ±83 ±67 500 400 167 134 83 ±200 ±83 ±67
Input Current @ No Load mA 25 30 30 30 30 30 30 30 15 18 18 18 18 18 18 18 8 8 11 11 11 11 11 11
Efficiency % 77 80 83 84 84 80 84 84 76 79 82 83 82 80 82 81 75 81 83 82 82 79 82 82
Maximum Capacitor Load µF 2200 1000 550 440 200 ±660 ±330 ±220 2200 1000 550 440 200 ±660 ±330 ±220 2200 1000 550 440 200 ±660 ±330 ±220
PART NUMBER STRUCTURE
SDS02 - 48 Series Name
SDS: SMD type SDH: DIP type
S
D:Dual
1
05 W
Input Output Output Voltage Quantity Voltage (VDC) (VDC) 12: 4.5~18 S:Single 3P3:3.3 24: 9~36 05:5 48:18~75 12:12 15:15 24:24
Input Range 4:1
H Isolation Option : 1600VDC Isolation H: 3000VDC Isolation
05:±5 12:±12 15:±15
www.PDUKE.com
2015/8/28
SDS02W SDH02W INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
Start up time
12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom)
Constant resistive load
Input surge voltage 1 second, max. Input reflected ripple current(1)
Input filter Remote ON/OFF Ctrl pin applied current via 1kΩ
Application circuit DC-DC ON
OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation
Conditions Low Line to High Line at Full Load No Load to Full Load
Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth
Isolation voltage Isolation resistance Isolation capacitance
Single Dual Single Dual Dual
1 minute
Conditions Standard Suffix ”H”
500VDC
Min.
Typ.
-1.0 -0.2 -1.0 -1.0 -0.5 -0.8 -5.0
Unit VDC ms VDC
mAp-p
mA mA
Max.
Unit
+1.0 +0.2 +1.0 +1.0 +0.5 +0.8 +5.0
% %
Max.
Unit
%
% mVp-p -0.02 +0.02 %/℃ 500 µs Continuous, automatics recovery
Min.
Typ.
1600 3000 1
VDC GΩ 50 50
MIL-HDBK-217F, Full load
Conditions Without derating With derating
Storage temperature range Thermal shock Vibration Relative humidity Lead-free reflow solder process Moisture sensitivity level(MSL) 2
20 20 20 Capacitor type Open or high impedance 2.0 3.0 4.0 2.5
100
ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature
18 36 75 10 10 25 50 100
Standard Suffix ”H”
Switching frequency Design meets
Case material Base material Potting material Weight MTBF
Max.
12 24 48 5 5
50
25% load step change
GENERAL SPECIFICATIONS Parameter
Typ.
4.5 9 18
DC-DC OFF
10% Load to 90% Load Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection
DC-DC ON DC-DC OFF Remote off input current
Min.
www.PDUKE.com
Min. -40 80 -55
pF
kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Silicone (UL94 V-0) 2.7g (0.10oz) 6.204 x 106 hrs
Typ.
Max.
Unit
80 ℃ +105 +125 ℃ MIL-STD-810F MIL-STD-810F 5% to 95% RH IPC J-STD-020D IPC J-STD-033B Level 2 2015/8/28
SDS02W SDH02W EMC SPECIFICATIONS Parameter EMI (1)
Conditions
Level
EN55022
ESD
EN61000-4-2
Radiated immunity Fast transient (2) Surge (2) Conducted immunity Power frequency magnetic field
EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8
Class A, Class B Air ± 8kV Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second
Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: 1. 2.
The standard module meet EMI Class A or Class B and input reflected ripple current with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
SDS(H)02-48S05W Derating Curve
SDS(H)02-48S05W Efficiency vs. Input Voltage
SDS(H)02-48S05W Efficiency vs. Output Current
MECHANICAL DRAWING SDS02W: SMD TYPE
PIN CONNECTION PIN SINGLE 1 +Vin 2 -Vin 4 Ctrl 5 NC 6 -Vout 7 +Vout
DUAL +Vin -Vin Ctrl -Vout Common +Vout
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
SDH02W: DIP TYPE
3
www.PDUKE.com
2015/8/28
