Transcript
DOWNLIGHT
®
BeveLED BASIC
1010
PROJECT INFORMATION PROJECT
DATE TYPE
1" REGRESS
BeveLED Basic Recessed Downlight - Our narrow footprint housing provides an economical architectural solution while delivering high performance with LEDs. 1" Regress
DELIVERED PERFORMANCE
14 Watts
BeveLED Basic DOWNLIGHT
20 Watts 1" Regress
80+ 80+ CRI CRI 68 60 1100 1500 1000 1300 2-Step MacAdam Ellipse
Color Rendering Index Lumens per Watt Source Lumens Delivered Lumens Color Consistency
Bevel Finish
Flange Finish
Performance based on 3000K
31⁄2" x 31⁄2"
CCT MULTIPLIER
2700K
3000K
3500K
4000K
80+ CRI
80+ CRI
80+ CRI
80+ CRI
1.00
1.00
1.08
1.08
Color Rendering Index Multiplier for Lumen Output
41⁄2" x 41⁄2" 51⁄2" x 51⁄2"
HOW TO SPECIFY Ordering Example: Specify trim code and housing code to order: Example : 1010W - B1 - S - 10 - LSTD4 - 9014 - M2 - 27KS - 30 - NCSM - 277V - DIML2 - CB27 TRIM ORDERING INFORMATION TRIM 1010 1010 Square Downlight 1" Regress
BEVEL STYLE
OPTION ______ Wet location 1 6” TechZone Ceiling Compatible (NCSM only) N/A with 01 or 02 flange finishes
W TZ
FLANGE FINISH
LENS
–
– B1 1” Regress Bevel, Painted Die Cast Matches Flange Finish AB1 1" Regress Bevel, Black Anodized AC1 1" Regress Bevel, Clear Matte Anodized
– S Solite (provided standard) F Frosted
1 Wet location, use with B1 trims only.
01 Clear Matte (AC Bevel only) 02 Black Anodized (AB Bevel only) 10 White 13 Statuary Bronze 21 Black 28 Metalized Grey RAL Custom Color (specify RAL #)
HOUSING ORDERING INFORMATION HOUSING CODE
WATTAGE
–
LSTD4 LSTD4
ENGINE CODE
– 9014 14W LED, 1000 lumens 9020 20W LED, 1300 lumens
M2 M2
COLOR
–
REFLECTOR
– 27KS 30KS 35KS 40KS
HOUSING TYPE
–
SELECT ONE VOLTAGE
–
2700K, 80+ CRI 30 30° beam NCSM New Construction, Narrow Width 3000K, 80+ CRI 50 50° beam IC Insulation-Contact 3500K, 80+ CRI 80 80° beam Rated / Airtight 2 4000K, 80+ CRI CP Chicago Plenum 2
– 120V 277V
120V 2 Step MacAdam ellipse is standard for all 2
USAI Lighting
®
www.usailighting.com
[email protected]
1126 River Road New Windsor, NY 12553
N/A with EM
T 845–565–8500 F 845–561–1130
DIMMING DRIVER OPTIONS
ACCESSORIES
– For use with 120V or 277V CB27 27" C-Channel Bars DIML2 0-10V dim, 10% CB52 52" C-Channel Bars (provided standard) EML Emergency battery 3 DIML4 Lutron A 3-wire/ECO, 1% EMLW Emergency battery, DIML4E Lutron 5 ECO, 5% wet location 3 DIML4H Lutron H ECO, 1% Fade TZ 6” TechZone ceiling compatible DIML6A EldoLED 0-10V, 0.1%, N/A with 01 or 02 logarithmic / Lutron controls flange finishes 4 DIML6B EldoLED 0-10V Linear, 0.1%, linear controls DIML6E EldoLED 0-10V, 1%, logarithmic/Lutron controls DIML6F EldoLED 0-10V, 1%, linear controls DIML7 EldoLED DALI, 0.1% 3 NCSM housings require above For use with 120V only ceiling access. Not for use with DIML3 Lutron A 2-wire, 1% IC or CP housings. 120V only 4 With NCSM housing only DIML19 Phase 2-wire dimming, 1% 120V only © 2014. USAI, LLC. All rights reserved. Patents pending. All designs protected by copyright. Revised 01/30/2017
DOWNLIGHT
®
BeveLED BASIC
1010
TRIM INFORMATION 1" Regress 6” TechZone Ceiling Compatible
1" Regress 1" Regress
1" Regress Bevel Finish Bevel Finish Flange Finish Flange Finish 31⁄2" x 31⁄2" 41⁄2" x 41⁄2" 51⁄2" x 51⁄2"
31⁄2" x 31⁄2" 41⁄2" x 41⁄2" 513⁄16" x 513⁄16"
HOUSING INFORMATION IC / Airtight - IC Chicago Plenum - CP
New Construction, Narrow Width - NCSM
7"
43/4" 1 - 23/16" 8 /8" 3
53/4"
11/8"
83/8"
Shown with EM option
7" 81/4" 13"
19" (Plan View)
19" (Plan View)
22” (Plan View)
22” (Plan View) 185/8" (Plan View) 221/8" (Plan View)
SPECIFICATIONS TRIM: 4-1/2” square aperture with a 1” regressed bevel and 1/2” flange, retained by two mounting clips. Die cast aluminum bevel is self-flanged and is available in white, statuary bronze, black, and metalized grey finishes. Also available in black anodized or clear matte bevel, with self finish or with contrasting painted flange. Custom color flanges available (provide RAL#). TechZone compatible trim option is not available with “01” or “02” flange finishes.
THERMAL MANAGEMENT: Proprietary high performance aluminum die cast heatsink for maximum LED life. Ambient temperatures at fixture location should not exceed 40°C during normal operation.
HOUSING: Fabricated of 20 ga. galvanized steel with thru wire J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch circuit wiring. IC rated housing is rated for direct contact with insulation. All-Ways Square® (covered by US Pat. No: US 7,832,889) FIELD REPLACEABLE DRIVER: 0-10V, 100%-10% solid state housing allows alignment of square aperture (up to electronic constant current driver with a high power factor 20° rotation) after housing installation and prior to provided standard and sources 2mA. Specify 120V or 277V. finish ceiling installation. NCSM with TZ option is Driver complies with IEEE C62.41 surge protection. compatible with 6” TechZone ceiling systems. TRIM LENS: Trim is shipped with integral solite lens DIMMING OPTIONS: Multiple dimming drivers available. standard; frosted lens available as an option. MAXIMUM CEILING THICKNESS: As per drawings See compatibility chart attached. Some on-time delay may above. REFLECTOR: Interchangeable precision injection molded be experienced depending on control system used. Note: specular polycarbonate reflector optimized for 30°, 50° or CEILING CUT OUT: 5-1/16" x 5-1/16" DIML6A and DIML6E logarithmic control are intended for 80° beam distribution. use with Lutron control systems; DIML6B and DIML6F LISTINGS: Dry/Damp. Wet location option available linear control are intended for use with non-Lutron FIELD REPLACEABLE LIGHT ENGINE: Available in 2 lumen with B1 trim only. NRTL/CSA-US tested to UL controls. DIML6 drivers source 2mA. packages: 14W (1000 delivered lumens) and 20W (1300 standards. IBEW union made. Energy Star Qualified EMERGENCY: Emergency lighting battery pack is provided under Luminaires Specification V2.0. Please see delivered lumens). Engine is field replaceable through the with remote test switch and require above ceiling access Energy Star website for exact model #s included aperture without tools. for service. EM option is not available with IC or CP in the listing. Please note that only B1-S-10 trims, COLOR: BeveLED is available in 4 color temperatures (2700K, housings. 30º and 50º optics, and DIML2 dimming drivers are 3000K, 3500K, 4000K). All color options are tightly binned MOUNTING: Butterfly brackets and adjustable nailer bars Energy Star Qualified. for fixture-to-fixture color consistency within a 2-Step with integral nails provided. Nailer bars are extendible from WARRANTY: 5 years MacAdam Ellipse. 80+ color rendering index provided 14" to 24" centers. standard. NOTES: RATED LIFE: Based on IESNA LM80-2008 50,000 hours at • Not for use in corrosive environment. 70% lumen maintenance (L70). • Use of pressure washer voids warranty. PHOTOMETRICS: Consult factory or website for IES files. Tested in accordance with IESNA LM79-2008.
USAI Lighting
®
www.usailighting.com
[email protected]
1126 River Road New Windsor, NY 12553
T 845–565–8500 F 845–561–1130
© 2014. USAI, LLC. All rights reserved. Patents pending. All designs protected by copyright. Revised 01/30/2017
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D2 / DIML2
®
USAI Lighting
DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together).
D2 / DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%)
Manufacturer 120V / 277V Crestron Crestron Crestron Crestron Crestron Leviton Lightolier (Philips) Lutron
Product
D2 / DIML2 Dimmer Compatibility Chart Dimmed Light Part Number Output Range
iLux dimmer expansion module DIN Rail dimmer DIN Rail analog output module 8 Channel dimmer module 8 Channel dimmer module IllumaTech dimmer Vega Diva
CLS-EXP-DIMFLV DIN-4DIMFLV4 DIN-A08 GLX-DIMFLV8 GLXP-DIMFLV8 IP710-DLX V2000FAMU DVTV-XX
Qty Fixtures Per Dimmer* Use source current per fixture specification sheet to determine number of fixtures per dimmer. Max number of fixtures is limited by dimmer load rating.
100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D2 / DIML2 0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
DIMMER: 0-10V (BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED DRIVER
V+
RED
V-
BLACK
NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together.
GREEN GND CLASS 2 CONTROL WIRES LINE
RELAY (BY OTHERS)
NEUTRAL
DIMMER: 0-10V w/ POWER SWITCHING
D2 / DIML2 0-10V DIMMING (NO RELAY)
FIXTURE
(BY OTHERS)
LINE
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED DRIVER
V+
RED
V-
BLACK
NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together.
GREEN
GROUND
GND
NEUTRAL
USAI Lighting
®
www.usailighting.com
[email protected]
1126 River Road New Windsor, NY 12553
T 845–565–8500 F 845–561–1130
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-2 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D3 / DIML3
®
USAI Lighting
DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together).
D3 / DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V D3 / DIML3 Dimmer Compatibility Chart Manufacturer 120V Only ETC ETC Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron
Product
Part Number
Dimmed Light Output Range
Sensor+ Cabinet Unison DRd Cabinet Maestro Wireless® 600W dimmer Maestro Wireless® 1000W dimmer HomeWorks® QS adaptive dimmer HomeWorks® QS 600W dimmer HomeWorks® QS 1000 W dimmer Caseta Wireless® Pro 1000W dimmer Stanza® dimmer RadioRA® 2 adaptive dimmer RadioRA® 2 1000 W dimmer myRoom DIN power module HomeWorks® QS wallbox power module Homeworks® DIN power module HomeWorks® wallbox power module GRAFIK Eye® QS control unit GRAFIK Eye® 3000 control unit RPM-4U module RPM-4A module GP dimming panels Ariadni CL 250W dimmer Diva CL 250W dimmer Grafik T CL or RF CL dimmer Nova T CL 250W dimmer
ELV10 ELV10 MRF2-6ND-120MRF2-10ND-120HQRD-6NAHQRD-6NDHQRD-10NDPD-10NXDSZ-6NDRRD-6NARRD-10NDMQSE-4A1-D HQRJ-WPM-6D-120LQSE-4A1-D HWI-WPM-6D-120 QSGR-, QSGRJGRX-3100-, GRX-3500HW-RPM-4U-120, LP-RPM-4U-120 HW-RPM-4A-120, LP-RPM-4A-120 Various AYCL-253PDVCL-253P-, DVSCCL-253PGT-250M-, GTJ-250MNTCL-250-
100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100%-1% 100%-1% 100%-1% 100%-1%
Qty Fixtures Per Dimmer* Fixture Wattage 39W and Less 40W - 80W 1 – 26 1 – 13 1 – 26 1 – 13 1–8 1–4 1 – 13 1–6 1–8 1–4 1–8 1–4 1 – 13 1–6 1 – 13 1–6 1–8 1–4 1–8 1–4 1–6 1–3 1–6 1–3 1 – 26 1 – 13 1–6 1–3 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1–8 1–4 1–8 1–4 1–8 1–4 1 – 10 1–5
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D3 / DIML3 2 WIRE PHASE DIMMING FIXTURE
DIMMER: 2 WIRE PHASE (BY OTHERS)
LED LINE
SWITCHED HOT NEUTRAL GROUND
BLACK WHITE
DRIVER
V+
RED
V-
BLACK
GREEN GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
USAI Lighting
®
www.usailighting.com
[email protected]
1126 River Road New Windsor, NY 12553
T 845–565–8500 F 845–561–1130
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-3 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D4 / DIML4
®
USAI Lighting
DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together).
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
Manufacturer 120V Only ETC ETC Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron 277V Only ETC ETC Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron
Product
D4 / DIML4 3-Wire Dimmer Compatibility Chart Dimmed Light Part Number Output Range
Sensor+ Cabinet Unison DRd Cabinet Nova T Nova T Nova Nova Vareo Skylark Diva Ariadni Vierti Maestro Maestro Wireless RadioRA 2 HomeWorks QS Interfaces GP Dimming Panels
D20 Dimming module D20F Dimming module NTF-10NTF-103PNF-10NF-103PVF-10SF-10P-, SF-103PDVF-103P-, DVSCF-103PAYF-103PVTF-6AMAF-6AM-, MSCF-6AMMRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV PHPM-3F-120, PHPM-3F-DV Various
100% - 1% 100% - 1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1%
Sensor+ Cabinet Unison DRd Cabinet Nova T Nova T Nova Nova Skylark Diva Ariadni Vierti Maestro Maestro Wireless RadioRA 2 HomeWorks QS Interfaces GP Dimming Panels
D20 Dimming module D20F Dimming module NTF-10-277NTF-103P-277NF-10-277NF-103P-277SF-12P-277-, SF-12P-277-3 DVF-103P-277-, DVSCF-103P-277AYF-103P-277VTF-6AMAF-6AM-277-, MSCF-6AM-277MRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV PHPM-3F-DV Various
100% - 1% 100% - 1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1%
Qty Fixtures Per Control* Fixture Wattage 39W and Less 40W - 80W 1–53 1–26 1–53 1–26 1–41 1 – 20 1–20 1 – 10 1–41 1 – 20 1–20 1 – 10 1–20 1 – 10 1–20 1 – 10 1–20 1 – 10 1–20 1 – 10 1–15 1–7 1–15 1–7 1–15 1–7 1–15 1–7 1–15 1–7 1–41 1 – 20 1–41 1 – 20 40W and Less 41W - 80W 1–53 1–26 1–53 1–26 1–44 1 – 22 1–33 1 – 16 1–44 1 – 22 1–33 1 – 16 1–33 1 – 16 1–33 1 – 16 1–44 1 – 22 1–33 1 – 16 1–20 1 – 10 1–33 1 – 16 1–33 1 – 16 1–33 1 – 16 1–88 1 – 44 1–88 1 – 44
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIML4 wiring diagrams continued on next page
USAI Lighting
®
www.usailighting.com
[email protected]
1126 River Road New Windsor, NY 12553
T 845–565–8500 F 845–561–1130
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-4 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D4 / DIML4 Continued
®
USAI Lighting
DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together).
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%) D4 / DIML4 3 WIRE PHASE DIMMING
FIXTURE
DIMMER: 3 WIRE PHASE (BY OTHERS)
CAP UNUSED ECOSYS WIRES DIMMED HOT SWITCHED HOT NEUTRAL
LINE
LED
PURPLE GRAY PURPLE ORANGE BLACK WHITE GREEN
GROUND
DRIVER
V+
RED
V-
BLACK
GND NEUTRAL
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with EcoSystem Control / LED Dimming Driver Wiring (Dims down to
Manufacturer 120V / 277V Lutron Lutron Lutron Lutron
D4 / DIML4 EcoSystem Dimmer Compatibility Chart Dimmed Light Part Number Output Range
Product
PowPak dimming module Energi Savr Node GRAFIK Eye QS (120V ONLY) Quantum
RMJ-ECO32-DV-B QSN-1ECO-S, QSN-2ECO-S QSGRJ-_E, QSGR-_E Various
100%–1% 100%–1% 100%–1% 100%–1%
Qty Fixtures Per Control* Fixture Wattage 39W and Less 40W - 80W 1–32 1 – 16 1–64 1 – 32 1–64 1 – 32 1–64 1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D4 / DIML4 EcoSystem CONTROLS ECOSYS BUS E2 E1
E2
FIXTURE
E1
WALL CONTROL (BY OTHERS)
LINE NEUTRAL
CAP UN-USED ORANGE WIRE
PURPLE GRAY PURPLE ORANGE BLACK WHITE GREEN
LED
DRIVER
V+
RED
V-
BLACK
GND
USAI Lighting
®
www.usailighting.com
[email protected]
1126 River Road New Windsor, NY 12553
T 845–565–8500 F 845–561–1130
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-4 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D4E / DIML4E and D4H /DIML4H
®
USAI Lighting
DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together).
D4E / DIML4E LED: Lutron 5 Series EcoSystem LED Driver / LED Dimming Driver Wiring (Dims down to 5%)
Manufacturer 120V / 277V Lutron Lutron Lutron Lutron
D4E / DIML4E EcoSystem Dimmer Compatibility Chart Dimmed Light Part Number Output Range
Product
PowPak dimming module Energi Savr Node GRAFIK Eye QS (120V ONLY) Quantum
RMJ-ECO32-DV-B QSN-1ECO-S, QSN-2ECO-S QSGRJ-_E, QSGR-_E Various
100%–5% 100%–5% 100%–5% 100%–5%
Qty Fixtures Per Control* Fixture Wattage 39W and Less 40W - 80W 1–32 1 – 16 1–64 1 – 32 1–64 1 – 32 1–64 1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D4H / DIML4H LED: Lutron H Series EcoSystem LED Driver with Fade to Black (dims down to 1%)
Manufacturer 120V / 277V Lutron Lutron Lutron Lutron
D4H / DIML4H EcoSystem Dimmer Compatibility Chart Dimmed Light Part Number Output Range
Product
PowPak dimming module Energi Savr Node GRAFIK Eye QS (120V ONLY) Quantum
RMJ-ECO32-DV-B QSN-1ECO-S, QSN-2ECO-S QSGRJ-_E, QSGR-_E Various
100%–1% 100%–1% 100%–1% 100%–1%
Qty Fixtures Per Control* Fixture Wattage 39W and Less 40W - 80W 1–32 1 – 16 1–64 1 – 32 1–64 1 – 32 1–64 1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D4E / DIML4E and D4H / DIML 4H EcoSystem CONTROLS ECOSYS BUS E2 E1
E2
FIXTURE
E1
WALL CONTROL (BY OTHERS)
LED
PURPLE GRAY PURPLE LINE
BLACK
NEUTRAL
WHITE
DRIVER
V+
RED
V-
BLACK
GREEN GND
USAI Lighting
®
www.usailighting.com
[email protected]
1126 River Road New Windsor, NY 12553
T 845–565–8500 F 845–561–1130
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-4EH Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D6A / DIML6A and D6E / DIML6E D6B / DIML6B and D6F / DIML6F
®
USAI Lighting
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together).
D6A / DIML6A and D6E / DIML6E LED Dimming Compatibility Table D6A / DIML6A and D6E / DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below) D6A / DIML6A = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1% D6E / DIML6E = EldoLED ECOdrive 0-10V control dims from 100% to 1% D6A / DIML6A and D6E / DIML6E Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6A 6E Refer to manufacturer's Lutron Diva DVTV/NFTV/NTFTV with PP-20 99% - 0.1% 1% dimmer load rating for Lutron Energi Savr Node QSN-4T16-S 100% - 0.1% 1% maximum and minimum Lutron GP Dimming Panels TVM2 Module 99% - 0.1% 1% fixture quantities per Lutron Interfaces GRX-TVI w/ GRX3503 100% - 0.1% 1% dimmer. Sensor Switch nIO nIO EZ 100% - 0.1% 1% Enlighted compatible. enlighted Control Unit CU-3E-1R 100% - 0.1% 1% * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D6B / DIML6B and D6F / DIML6F LED Dimming Compatibility Table D6B / DIML6B and D6F / DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-Lutron and others listed in the table below) DIMMER:SOLOdrive 0-10V D6B / DIML6B = EldoLED 0-10V control dims from 100% to 0.1% (BY OTHERS) D6F / DIML6F = EldoLED ECOdrive 0-10V control dims from 100% to 1% LED 0-10V (-) GRAY D6B / DIML6B and D6F / DIML6F Dimmer Compatibility Chart 0-10V (+) PURPLE Dimmed Light Qty Fixtures V+ RED SWITCHED HOT SWITCHED HOTNumber DRIVER Manufacturer Product Part Output Range Per Dimmer* VBLACK NEUTRAL WHITE 120V & 277V DIML6B 6F Refer to GREEN 2112U-101 Bush-Jaeger Electronic potentiometer 100% - 0.1% 1% manufacturer's Jung Electronic potentiometer 100% - 0.1% 1% dimmer load GND 240-10 CLASS 2 CONTROL WIRES Leviton IllumaTech dimmer IP710-DLX 100% - 0.1% 1% rating for LINE Lightolier (Philips) Momentum (120V ONLY) ZP600FAM120 100% - 0.1% 1% maximum and RELAY Merten Electronic potentiometer 5729 100% - 0.1% 1% minimum fixture (BY OTHERS) DIML6A, 6B Pass & Seymour Titan CD4FB-W 100% - 0.1% 1% quantities per NEUTRAL TO SWITCH POWER Watt Stopper Miro 0-10V DIMMING W/RELAY DCLV1 100% - 0.1% 1% dimmer. Synergy Wallbox Dimmers ISD BC 100% - 0.1% 1% Enlighted ABB i-bus SD/S 2.16.1 100% - 0.1% 1% compatible. Crestron Modules GLX-DIMFLV8, GLXP-DIMFLV8 100% - 0.1% 1% Crestron Green Light GLPAC-DIMFLV4-, GLPAC-DIMFLV8100% - 0.1% 1% DIML6A, 6B 0-10V (-) Crestron Green Light Power Pack GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM, GLPP-1DIMFLV3EX-PM 100% - 0.1% FIXTURE 1% 0-10V DIMMING W/RELAY TO GRAY SWITCH POWER 0-10V (+) PURPLE DIMMER: 0-10V Crestron DIN Rail Analog Output Module DIN-A08 100% - 0.1% 1% V+ RED SWITCHED HOT BLACK Crestron DIN Rail 0-10V Fluorescent Dimmer DIN-4DIMFLV4 100% - 0.1% 1% LEDV- BLACK NEUTRAL WHITE GREEN Crestron iLux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV 100% - 0.1% 1% DRIVER GND enlighted Control Unit CU-3E-1R 100% - 0.1% 1% CLASS 2 CONTROL WIRES * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and LINEcircuit details. (BY OTHERS)
RELAY
(BY OTHERS)
DIMMING DRIVER WIRING SCHEMES:
NEUTRAL
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D6 / DIML6 0-10V DIMMING W/RELAY TO SWITCH POWER
D6 / DIML6 0-10V DIMMING (NO RELAY)
FIXTURE
DIMMER: 0-10V 0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED DRIVER
V+
RED
V-
BLACK
(BY OTHERS)
LINE
GREEN GROUND
GND CLASS 2 CONTROL WIRES LINE
FIXTURE
DIMMER: 0-10V w/ POWER SWITCHING
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED DRIVER
V+
RED
V-
BLACK
GREEN GND
RELAY (BY OTHERS)
NEUTRAL NEUTRAL
USAI Lighting
®
www.usailighting.com DIML6A, 6B
[email protected]
1126 River Road New Windsor, NY 12553
0-10V DIMMING (NO RELAY)
DIMMER: 0-10V w/ POWER SWITCHING (BY OTHERS)
FIXTURE
T 845–565–8500 F 845–561–1130
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-6 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D7 / DIML7
®
USAI Lighting
DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together).
D7 / DIML7 LED: EldoLED DALI Dimming Driver Wiring (Dims down to 0.1%)
D7 / DIML7 DALI CONTROLS DALI BUS DA DA
FIXTURE WALL CONTROL (BY OTHERS)
LINE NEUTRAL
LED
ORANGE (-) ORANGE/WHITE (+) BLACK WHITE GREEN
DRIVER
V+
RED
V-
BLACK
GND
USAI Lighting
®
www.usailighting.com
[email protected]
1126 River Road New Windsor, NY 12553
T 845–565–8500 F 845–561–1130
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-7 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D19 / DIML19
®
USAI Lighting
DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together).
D19 / DIML19 LED: Hatch XTC series or equivalent - Forward and Reverse Phase Dimming Driver. Dims down to 1% contingent upon dimmer specification and load. 120V only. D19 / DIML19 2 WIRE PHASE DIMMING FIXTURE
DIMMER: 2 WIRE PHASE (BY OTHERS)
LED LINE
SWITCHED HOT NEUTRAL GROUND
BLACK
DRIVER
WHITE
V+
RED
V-
BLACK
GREEN GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
D19 / DIML19 Dimmer Compatibility Chart 120V ONLY Forward Phase / TRIAC Dimming Manufacturer Product Qty Fixtures Per Dimmer Leviton IPL06-10Z Use fixture wattage per 6613-xxx fixture specification Lutron S-600P sheet to determine S-603P number of fixtures DV-600P per dimmer. Max number DV-603P of fixtures is limited by DVSC-603P dimmer load rating. CT-600P CT-603P 120V ONLY Reverse Phase / ELV Dimming Manufacturer Product Leviton 6615 IPE04-xxx Lutron NTELV-300 NTELV-600 SELV-300P SELV-303P DVELV-300P DVELV-303P
USAI Lighting
®
www.usailighting.com
[email protected]
Qty Fixtures Per Dimmer Use fixture wattage per fixture specification sheet to determine number of fixtures per dimmer. Max number of fixtures is limited by dimmer load rating.
1126 River Road New Windsor, NY 12553
T 845–565–8500 F 845–561–1130
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-19 Revised 03/22/2017
