Transcript
SPECIALIZED MISSION CONTROL APP OVERVIEW The unique Specialized Mission Control App allows Turbo and Turbo Levo riders to plan and track their rides, control range, adjust motor settings and diagnose their Turbo system. These are the main features to enhance your Turbo ride experience:
Navigation •
turn-by-turn navigation via street maps (primarily for on-road rides)
Smart Control •
no more range anxiety thanks to Smart Control, a custom algorithm that controls motor output based on three options: turn-by-turn navigation, ride time or distance
Motor Tuning • •
Turbo: ECO-Mode and acceleration response Turbo Levo: customization of ride modes (Turbo / Trail / Eco), motor current and acceleration response
Diagnosis •
Turbo health, charge cycles, charge cycles till recommended battery replacement, battery health, motor and battery software
Ride History and Connectivity • •
track and evaluate rides (mileage, speed, elevation, consumption, rider input, system power) Strava upload into e-bike category
Compatibility •
all Turbo Levos and all Turbos with a 562 Wh or 691 Wh battery (Turbo X/Turbo S MY16)
Mr. Turbo
SPECIALIZED MISSION CONTROL APP GETTING STARTED This document explains the most relevant functions and helps you to set up and use the Mission Control App. Download and set up App • • •
go to the App Store (Apple devices) or the Google Play Store (Android) to download App (search for ‘Specialized Mission Control App’) turn on Bluetooth on your phone, switch on your Turbo bike (without a Turbo bike you can use the demo mode only) open app and register
Connect to Turbo (note: one bike can only be connected to one app at the same time) • turn Turbo on, activate Bluetooth on mobile phone, open the app • go to ‘Settings’ --> ‘My bikes’ and tap on add-bike-symbol in upper right screen • select the bike you want to connect with • once you have a bike in your ‘my bikes’ list, the app will later re-connect to them automatically when starting the app (Bluetooth on, Turbo on)
SPECIALIZED MISSION CONTROL APP SMART CONTROL: TURN-BY-TURN NAVIGATION Screen ‘Ride’: address search (A) – current position on map (B) – track ride (C) Smart Control (D) – search for POI (E) Street maps: if you want to navigate turn-by-turn, you need to download a map for the desired country (go to ‘Settings’ --> ‘offline maps’) • the amount we charge (0.99 Euros / 0.99 $) is the minimum amount we have to charge
Using Smart Control • • • • • • •
do address search (A) + (1) select on of the three routing options (3) – the selected route is highlighted grey – tapping on another option will show route on map activate Smart Control by wiping bar to the right (4) set the desired battery capacity at the destination and accept setting (5) enjoy your ride – Smart Control adjusts the motor output automatically based on your input if you want to pause your ride, tap on the ‘+’ symbol in the lower left screen and choose pause (6) if you want to end and save your ride, tap on the ‘+’ symbol and the flag symbol (7) – you can then give your ride a name – it is saved in the app automatically – if you want to upload it automatically to Strava’s E-Bike section, select automatic synchronization in ‘Settings’
1
A
B
3
4
5 7 D
C E
6
SPECIALIZED MISSION CONTROL APP SMART CONTROL: RIDE TIME AND DISTANCE Activate Smart Control and set desired battery capacity at end of ride (1) and set desired ride distance (2)
1
or set desired ride time (3) – this is the preferred mode for Levo riders (most accurate)
2 3
Tip: If you want to use the full battery capacity you should allow for a safety margin, e.g. if you want to arrive with 0 % at destination, set Smart Control to 10 % Please note: a 100 % accurate power control with Smart Control is not possible; Specialized keeps working on further refinements; in the future it will be possible to upload existing gpx-tracks into the app for more accuracy
SPECIALIZED MISSION CONTROL APP TUNE: MOTOR SETTINGS
A
A) Turbo 1.
ECO setting from 10-70 % of maximum power (= Turbo)
2.
acceleration response from Eco to Race determines how fast the bike speeds off (restart of bike needed to save setting)
1 2
B B) Turbo Levo 1. individual settings for Eco / Trail / Turbo; higher mode cannot be below setting for lower mode (e.g. setting for Trail cannot be lower than setting for Eco)
1
2. motor current: limits motor output, increases range (max. speed with motor assistance not affected)
2
3. acceleration response (how fast the bikes speeds off; restart of bike needed to save setting)
3
SPECIALIZED MISSION CONTROL APP TUNE: MOTOR SETTINGS 1 Wheel Circumference (1) 1. 2.
2
Turbo: value has no effect on bike speed with motor assist, but changes what you see on the display Turbo Levo: range goes from 2000-24000 mm
3
Fake Channel (2) + (5)
4
Activate Channel and select unused channel to show battery state of charge on any ANT+ device; then search for sensors in your ANT+ device and select found channel Please note: if you use a Garmin device and select the ‘heart rate’ rate channel, state of charge in % below 30 will not be displayed; chose other channel, e.g. cadence
Battery beeper (3) Turn off/on the battery beeper for Levo batteries
Restore Default settings (4) Use this option if you want to go back the standard settings for motor, wheel circumference, Fake channel and battery beeper
5
example: cadencefield in Garmin 1000 shows state of charge through fake channel; works with any ANT+ device
SPECIALIZED MISSION CONTROL APP RIDE STATUS: RIDER AND MOTOR OUTPUT Rider output 1. Turbo: cannot be shown as rear hub motors cannot measure rider output 2. Turbo Levo: app shows rider output in watts (as precisely as any powermeter on the market) Please note: one needs to distinguish between mechanical and electric output; due to some inevitable loss mechanical power will be slightly lower than electric power; app shows electric power
Motor output 1. 2. 3.
App shows motor output in watts for both Turbo and Turbo Levo Turbo Levo: the ride history shows summary for motor output and system output (bike and rider together) Turbo: app shows statistic for consumption over ride
SPECIALIZED MISSION CONTROL APP SETTINGS
1. Language-Coach: deactivate or activate speech output for audio navigation audio (1) 2. display of mobile can stay on or off, based on your preferences; if you do nightrides, you may want to keep the display on (2)
1 2
3. if preferred, automatically sync your rides with Strava by uploading your rides into a dedicated e-bike category; if you want to do so, you need an account with Strava (3) 4. My Bikes: show bikes you once connect to, find new bikes and delete bikes; a bike that is already connected to Mission Control cannot be found and selected by another app user (4) 5. Offline maps: need to be downloaded to use navigation by address; per country we charge you the mandatory amount of 0.99 Euro / 0.99 $ (5)
3 4
5
GARMIN CONNECT IQ / SPECIALIZED LEVO GETTING STARTED A Supported Devices: -
Garmin Edge 1000 Garmin Edge Explore 1000 Garmin Edge 520
Garmin Express: To Use Connect IQ, please visit the Garmin homepage and download and install Garmin Express.
A Let’s get ready:
Please be sure your Garmin Device is connected and up-to-date
GARMIN CONNECT IQ GETTING STARTED
Connect IQ: - Visit the homepage : https://apps.garmin.com/de-DE/ And search after “Specialized”. - Under the line “Result´s for “Specialized”” you can see which are the supported Devices for the App - Please choose your Device
GARMIN CONNECT IQ GETTING STARTED
Specialized App: - To install the app on your Garmin Device, click on “Download”.
A
A
GARMIN CONNECT IQ GETTING STARTED
Specialized App: - When your Device is connected correctly and you are connected to Garmin Express, a Pop-Up will open - In this Pop-Up you can choose your A Device - After that please click on “confirm” B and the app will automatically install on your
A B
GARMIN CONNECT IQ GETTING STARTED
Specialized App: - When this message appears, please choose “allow”
GARMIN CONNECT IQ GETTING STARTED
Specialized App: - Please click in this message on “Start App” - Now the App will be transfered and the Device can be disconnected.
GARMIN CONNECT IQ GETTING STARTED X X
X
X Setting up the App with a Garmin (e.g. Garmin Edge 1000)
Open “Activity Profiles”
Open the Settings by pushing the button in the middle below
Adding a new profile by pushing the button “+” in the right corner below. Or Open an existing profile
Push the Button
X
Open “Data Screens”
GARMIN CONNECT IQ GETTING STARTED X X
X
X Choosing a Screen
Choose in how many parts you like to divide your Screen
After pushing the hack, please press in any free area on the screen.
For the Specialized App “1” is the recommended number to show the whole display
Then the shown selection will appear. Chosse the data field “Connect IQ – 0/10”
Please confirm by pushing the check Push the Button
X
Choose “SpecializedLEV”
GARMIN CONNECT IQ GETTING STARTED
X
X Please push the check.
The App is ready for pairing with the Levo.
Now the App is ready. Switch the Levo on.
Please choose the profile you took for the app and click on the button “RIDE”.
Push the Button
X
If the Levo already has a connection to your Garmin, the battery bar will show you the battery status and you can skip the next step. The picture shows an example, how you also can set-up the app individual with more data fields. You can use the Fakechannel to use
GARMIN CONNECT IQ GETTING STARTED
If your Device has no connection to the Levo, please take it as near as possible to the charging port.
Pairing can take about 1 minute.
GARMIN CONNECT IQ GETTING STARTED
When your Device is connected to the Levo, “Turbo”, “Trail” or “Eco” will appear in the upper Field. Now your Levo is ready.
The Speed notification is your GPS-System and doesn’t mean that you are connected to the Levo.
GARMIN CONNECT IQ GETTING STARTED
X
X
X
To change the modi, please press “+” to get more support and “-” to get less support from your motor.
In the Topbar you can see your battery status.
Push the Button
By clicking for a few seconds in a datafield, you Can configurate them with other datas.
X
When you turn your Levo off, in the Display “OFF” appears.
GARMIN CONNECT IQ RESET DEVICE
To Connect the Garmin with another Levo, you have to connect it to your computer and start Garmin Express. Click on “Apps verwalten” and choose the Specialized (push the “…” Button) Now you can reset the relation of your bike By setting the Device Number to “0”.
