Transcript
SPECIFICATION
IPASY1002
PoE over Coaxial, 802.3at Features
• PoE over Coaxial • Standard: IEEE802.3at • Speed: 100 Mbps, full duplexer • Cable: RG59 video-grade coaxial cable or above • Transmission distance: 200 M RG59 coaxial cable • Power Consumption: TX <=2.5W , RX<=2.5W • Class 3 powered device available • Output/Input Interface: BNC connector • IP Security Surveillance over existing coax cable with powering • Plug and Play
Description This is a specifiation for PoE Over Coax solution. By using novel RF technology, it can extend the transmisson distance of power and Ethernet signal up to 200 ~ 300m over coaxial cable. The PoE power are converted into coaxial cable. IPASY1002-Rx receives the singal and power from coaxial cable and converts back to PoE interface. Specifications Model Number
IPASY1002-TX
IPASY1002-RX
1 x RJ-45 female connector(IN)(PoE IN)
1 x RJ-45 female connector(OUT)(PoE OUT)
1 x BNC female connector (OUT)
1 x BNC female connector (IN)
RG59/RG6/RG11 video-grade coaxial
RG59/RG6/RG11 video-grade coaxial
cable (used for Cable TV)
cable (used for Cable TV)
Standard
IEEE802.3at
IEEE802.3at
Speed
100Mbps for all duplexer
100Mbps for all duplexer
Ethernet Cable
<=2m STP (shielded) cable
<=2m STP (shielded) cable
<=100m UTP cable
<=100m UTP cable
Max 300m @RG6 coaxial cable
300m @RG6 coaxial cable
Max 300m coax cable + 100m UTP cable
300m coax cable + 100m UTP cable
Powered by PoE
YES
YES
Input Operating Voltage
42~57 VDC @RJ-45 female connector
37~57 VDC @F-45 female connector
Output Voltage
40~56 VDC @F female connector
36~56 VDC @RJ-45 female connector
Interface Connector Data + Power Port Cable Electrical
Transmission distance Power
Remote Powering ability Power consumption
Maximal 15.4W (Cable & Power supply depedent) Under 2.5W
Under 2.5W
Enclosure material
Alumunum alloy
Alumunum alloy
Mounting
wall mounting available
wall mounting available
Dimension
112mx72mmx31.5mm(Not include connector)
112mx72mmx31.5mm(Not include connector)
-10 to +60 degree C
-10 to +60 degree C
Mechanical
Environment Operating temperature
Winsonic Electronics CO.,LTD.
www.ewinsonic.com TEL:886-3-3704789
FAX:886-3-3704722 E-mail:
[email protected] No.290-1 Wun-Jhong Rd. Taoyuan City, Taoyuan Taiwan R.O.C
SPECIFICATION
IPASY1002
PoE over Coaxial, 802.3at Application
IP Camera
PoE
~100m PoE
Coaxial Cable 200M (600ft) IPASY1002-TX
IPASY1002-RX
throughput(Mbps)
Data transmission graph 120 110 100 90 80 70 60 50
RG6
50m
100m
150m
200m
250m
300m
distance(M)
1. Used 30W PoE power injector for test. 2. 15.4W 802.3af SW : standard PoR Switch, 48V/375mA. 3. Cable DC Resistance = DC Resistance of Cable inner conductor=DC Resistance of Cable Shield. 4. Typically, regular resistance of RG 6 is 13 ohm/100m 5. Typically, regular resistance of RG 59 is 17 ohm/100m 6. Typically, regular resistance of RG11 is 4.9 ohm/100m 7. Resistance of Low resistance RG6 such as WC5CFB16-200H is 3.7 ohm/100m 8. Resistance of Low resistance RG11 such as WC7CFB-A is 2.4 ohm/100m 9. DC Cable Resistance should include Lan UTP Cable, 10ohm 100m(for standard PoE interface, cat 5E)
Winsonic Electronics CO.,LTD.
www.ewinsonic.com TEL:886-3-3704789
FAX:886-3-3704722 E-mail:
[email protected] No.290-1 Wun-Jhong Rd. Taoyuan City, Taoyuan Taiwan R.O.C
