Transcript
ELECTRONIC DRIVER WITH 0-10V & DMX MODULE
Specification Sheet
CLASS 2
• Driver Type: CV (Constant Voltage)
• Output Power: 96W
• Number of Outputs: 1
• Universal Input Voltage Range: 120-277 VAC
• Damp location
• Operating temperature: -40° C (-40°F) to +70°C (+158°F)
• Non-Dimming as standard, 0-10V & DMX Dimming with optional modules SPECIFICATIONS (Base Model - Non-Dim) INPUT
OTHER
Voltage Range
120-277 VAC
Length (L)
11.46 in
Frequency Range
50/60Hz
Width (W)
3.00 in
Power Factor
>0.9 at full load, 120V through 277V
Height (H)
1.30 in
Efficiency
86%
Mounting (M)
1.3 KG
AC Current
.94A @120V and 0.41A at 277V
Working Temp. Range
-30 to 60ºC
Warranty
3 years
OUTPUT Max Power
96 Watts
Max Current
0 - 4A
Max Voltage
24V
WIRE SPECS Input
12”, UL 1316 #18AWg (White, Black, Green)
Output
12”, UL 1316/1430 #18AWG (Red and Blue)
PART NUMBER BUILDER SERIES
OUTPUT VOLTAGE
INPUT VOLTAGE
CONTROL
GG
24 - 24VDC
UNV - 120 - 277VAC
• XXX - Non-Dim Switched (Base Model) • 0-10V - with 0-10V module (page 2) • DMX - with DMX module (page 3)
1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 |
[email protected] | www.opticarts.com
1 of 4
Optic Arts reserves the right to modify this specification without prior notice. Last Modified: July 11, 2016 5:34 PM
© CC Optic Arts 2016
ELECTRONIC DRIVER WITH 0-10V & DMX MODULE
Specification Sheet
DIMMING MODULES - EldoLED™ DMX MODULE LINEARdrive DC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, low-power full-colour static or dynamic LED lighting. LINEARdrive DC is DALI, DMX/ RDM and LedSync compatible. • Driver Type: CV (Constant Voltage)
• Cove lighting
• Entertainment lighting
• Decorative lighting
• Full-colour architectural lighting
• Dynamic colour panel lighting
• Signage/advertising lighting CLASS 2
OTHER
INPUT Voltage Range
12 - 28 VDC
Length (L)
6.02 in
AC Current
4A @ 24V, 6A @ 12V
Width (W)
1.97 in
Height (H)
0.91 in
Mounting (M)
120g
OUTPUT Max Power
100 Watts
Working Temp. Range
-20 to 50ºC
Max Current
0 - 2A
Warranty
3 years
Max Voltage
24V
WIRE SPECS
DIMMING PERFORMANCE
Input
ELECTRONIC DRIVER - DMX MODULE Dims to 0.1% on most DMX systems CONTROL CHANNELS
4 Channels
DIMMING PROTOCOL
DMX/RDM
12”, UL 1316 #18AWg (White, Black, Green)
Output
12”, UL 1316/1430 #18AWG (Red and Blue)
DIMMING MODULES - 0-10V MODULE
• Driver Type: CV (Constant Voltage)
• Universal Input Voltage Range: 120-277 VAC
• Number of Outputs: 1
+/- 10%
• IP20 design for dry and damp location
• Operating temperature -30 to 60ºC
• Non-Dimming
• Available in 0-10V version (by adding SLD-
• Output Power: 100W
DIM1B)
CLASS 2
INPUT
OTHER
Voltage Range
120-277Vac +/- 10%
Length (L)
11.46 in
Frequency Range
50/60Hz
WIdth (W)
3.00 in
Power Factor
>0.9 at full load, 120V through 277V
Height (H)
1.30 in
Efficiency
86%
Mounting (M)
1.3 KG
AC Current
.94A @120V and 0.41A at 277V
Working Temp. Range
-30 to 60ºC
Warranty
3 years
OUTPUT Max Power
96 Watts
Max Current
0 - 4A
Max Voltage
24V
WIRE SPECS Input
(White, Black, Green) Output
DIMMING PERFORMANCE ELECTRONIC DRIVER - 0-10V
12”, UL 1316 #18AWg 12”, UL 1316/1430 #18AWG (Red and Blue)
Dims to 10% on most 0-10V dimmers
1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 |
[email protected] | www.opticarts.com
2 of 4
Optic Arts reserves the right to modify this specification without prior notice. Last Modified: July 11, 2016 5:34 PM
© CC Optic Arts 2016
Specification Sheet
ELECTRONIC DRIVER WITH 0-10V & DMX MODULE WIRING DIAGRAM - EldoLED™ DMX MODULE
®
24V DC24V DC+
DMX MODULE LED+ CH1 CH2 CH3 CH4 -
DMX in + DMX in DMX in shield
®
24V DC24V DC+
DMX MODULE LED+ CH1 CH2 CH3 CH4 -
DMX in + DMX in DMX in shield
FROM DMX CONTROLLER (BY OTHERS)
UL LISTED ENCLOSURE (BY OTHERS)
ELECTRONIC DRIVER
W/A B G R LED+
ELECTRONIC DRIVER
1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 |
[email protected] | www.opticarts.com
3 of 4
Optic Arts reserves the right to modify this specification without prior notice. Last Modified: July 11, 2016 5:34 PM
© CC Optic Arts 2016
Specification Sheet
ELECTRONIC DRIVER WITH 0-10V & DMX MODULE WIRING DIAGRAM - 0-10V MODULE
24V +
24V -
0-10 +
0-10 -
ELECTRONIC DRIVER
120 - 277 VAC 0 - 10 V CONTROLLER
FIELD INSTALLED IN LOW VOLTAGE WIRING COMPARTMENT
- Install SLD-DIM1B Module in low voltage wiring compartment. - If only one fixture is connected to module, use one pair of yellow and blue wires and cap off the remaining pair. If two fixtures are connected, both pairs may be used.
PURPLE WIRE TO 0-10V CONTROLLER + GRAY WIRE TO 0-10V CONTROLLER -
SLD-DIM1B 0-10V MODULE
YELLOW WIRE TO LED + YELLOW WIRE TO LED + BLACK WIRE TO DC - OUTPUT OF DRIVER RED WIRE TO DC + OUTPUT OF DRIVER BLUE WIRE TO LED BLUE WIRE TO LED -
1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 |
[email protected] | www.opticarts.com
4 of 4
Optic Arts reserves the right to modify this specification without prior notice. Last Modified: July 11, 2016 5:34 PM
© CC Optic Arts 2016
