Transcript
Tappan For Belden 1189A West Penn 6300 General Cable C5785
Southwire 57570103 Southwire 57570101 Commscope 5750
SPECIFICATION SHEET 100 Bradley Parkway • Blauvelt, NY 10913 Phone: 1-800-WIRE-911 • Fax: 1-845-353-9315
TAPPAN Spec. C40065.5 Update 1.3 5/16/2013
SERIES 6 - RG6/U PREMIUM BROADBAND COAX FOR CATV, MATV, AUDIO – VIDEO AND RADIO REQUENCY 75C 300V NON-PLENUM UL RATED
CONSTRUCTION:
18 AWG SOLID COPPER-COVERED STEEL, FOAM PE INSULATION, DUAL-FOIL TAPE PLUS 60% ALUMINUM BRAID, PLUS DUAL-FOIL TAPE, PLUS 40% ALUMINUM BRAID SHIELD, (QUAD SHIELD) PVC JACKET.
INSULATION:
FOAM POLYETHYLENE
SHIELD(S):
1 & 2 - BONDED DUAL FOIL TAPE PLUS 60% ALUMINUM BRAID rd th 3 & 4 - DUAL FOIL TAPE PLUS 40% ALUMINUM BRAID (QUAD SHIELD)
JACKET:
PVC
NOMINAL DIAMETER(S):
CONDUCTOR: .040” INSULATION: .180” OVERALL: .298”
ST
nd
BLACK
CABLE WT:
37 Lbs/1000Ft Approx (Net Weight)
TEMP/VOLTAGE:
75C / 300V
PRINT LEGEND:
“RG6/U TYPE QUAD SHLDS” E118871 CM/CL2/CATV 18AWG (UL) c(UL) CMH SWEPT TO 3GHz MADE IN USA RoHS COMPLIANT
NEC:
CM/CL2/CATV. FOR PLENUM VERSION GO TO SPEC NO. D40019
COMPLIANCE:
UL 444 CM by (UL) / NEC ARTICLE 800/820 CSA CMH by c(UL) / RoHS
FLAME TEST:
UL 1685 Vertical Tray / CSA FT1
CAPACITANCE:
16.2 pF/ft Nominal
VEL OF PROP:
82%
IMPEDANCE:
75 OHMS
RESISTANCE:
30.41 OHMS D.C. PER 1000 FT @ 68 DEG. F (Max.)
MISC:
MADE IN USA
TAPPAN PART No.:
18CCSRG6X4/CM/CL2
* +/- 10% Manufacturing tolerance * On non-standard product, customer agrees to accept all lengths manufactured
ATTENUATION MHz dB/100ft 1 0.37 5 0.54 10 0.66 55 1.46 100 1.92 211 2.87 270 3.24 300 3.43 350 3.72 400 3.85 450 4.25 550 4.70 700 5.05 750 5.58 870 5.99 1000 6.31 1450 7.85 1800 8.86 2250 10.00 2500 10.63 3000 11.91
Tappan Wire & Cable Inc. provides information and specifications on an “as is” basis. Information in specifications described herein are subject to error and/or omission, and subject to change without notice. Although we make all efforts possible to ensure the accuracy and timeliness of the information, Tappan Wire & Cable, will not be held liable for any damages whatsoever, even if advised of the possibility of such damages, arising from the use, or inability to use, the information or specifications herein. Please refer to our “Website Use Policy”, listed on our website, www.tappanwire.com, under the Sales Support Section for full details, or contact your Tappan Representative. This drawing may contain patented or proprietary information. It is the property of Tappan Wire and must not be used in any way detrimental to Tappan Wire. Acceptance by signature of this drawing will be considered as an agreement of and acceptance of the foregoing. Update 1.3 5/16/2013 Logo & Format.
