Transcript
lumencove®XT
SPECIFICATION SHEET
EXTERIOR DYNAMIC WHITE
Client:
Project name: Order #:
Type:
Qty:
FEATURES AND BENEFITS
Physical : • • • • • • • • •
Low copper content extruded aluminum housing Available in 1’, 2’, 3‘ or 4’ sections Electro-statically applied polyester powder coat finish Aluminum end caps and silicone gaskets Stainless steel hardware Tempered glass lens IP66 Corrosion-resistant option for marine environments Meets 3G ANSI C136.31 Vibration standard for bridge applications
Performance : • • • • • •
Dynamic Warm variable color temperature: 2200K, 2700K, 3000K Dynamic White variable color temperature: 2700K, 4000K, 6500K Available in ASHRAE (21 LEDs/ft), Regular Output (21 LEDs/ft) or High Output (42 LEDs/ft) versions Lumen maintenance 100,000 hrs [L70 @ 25°C] Resolution per foot or per fixture (see page 4) Operating temperatures: -25° C to 50° C [-13F to 122F]
Electrical : • • • • • •
Line voltage luminaire for 100 to 277V Power and data in 1 cable (#16-5) 5W/ft version meets ASHRAE standards for linear lighting on building facades 6W/ft version Regular Output version 12W/ft version High Output version DMX 512 ready
3 3 3 3 13 8 " ,25 8 " ,37 8 " , 49 8 " [340mm, 645mm, 949mm , 1254mm]
TOP VIEW
1 KEEP MIN. DISTANCE BETWEEN FIXTURES 8 " [3mm]
1 2 " 2 [64mm]
FRONT VIEW
16" [406mm] Input Cable
4 "* [102mm] *2" [51mm] on 1ft configuration
5 year warranty 1/6 2014.10.02 EM - R9
5" [127mm] MINIMUM COVE WIDTH 3 2 " 16 [56mm]
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
SIDE VIEW
lumencove®XT
SPECIFICATION SHEET
EXTERIOR DYNAMIC WHITE
MOUNTING OPTIONS 1 " 3 8 [79mm]
11 " 16 [17mm]
R 1 " 8 [4mm]
SAM Slim Adjustable Mounting
SAM Mounting Hole Pattern 3/4” [19mm]
3/8” [10mm]
7 " 16 [10mm]
UMP Fixed Mounting
3 1/2” [89mm] 2 7/8” [73mm]
3 " 16 [5mm]
2X 9/32” THRU ALL 0°
UMAS Universal Adjustable Mounting
3 8 " [10mm]
2 1 " 2 [64mm]
UMP Mounting Hole Pattern 3/4” [19mm]
90°
3/16” [5mm]
3/8” [10mm]
3/8” [10mm]
180°
2 1/2” [64mm] 1 3/4” [45mm]
2" [51mm] 2X 9/32” THRU ALL 63°
UMAS Mounting Hole Pattern
0°
WAM2 Adjustable Wall Mounting
5/8” [16mm]
1 1/16” [27mm]
-63°
6" or 12" [153 or 305mm]
2 1/2” [64mm] 116°
2X 1/4” THRU ALL
1 3/4” [45mm]
0°
WAM6 & WAM12 Adjustable Extended Arm Mounting
2/6 2014.10.02 EM - R9
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
-116°
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
WAM Mounting Hole Pattern
lumencove®XT
SPECIFICATION SHEET
EXTERIOR DYNAMIC WHITE
ACCESSORIES Order separately
Control Systems: LTO2 Lumentouch 2.0 is a wall mount DMX 512 controller keypad LCU Lumencue is a USB / mini SD DMX 512 controller LID LumenID is a diagnostic and addressing DMX 512 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. LTN Lumentone is a simple pre-programmed DMX 512 controller with a push button rotary dial and live feedback.
CBOX : iCBOX-___V-___-___ Interior DMX 512 data box. Data input and output, M20 provision holes with plugs. Voltage input and output, M20 provision holes with plugs. Up to six outputs to fi xtures, M20 provision holes with plugs. Please specify desired input voltage and fi nish. Refer to iCBOX specifi cation sheet for details. CBOX-___V-___-___ DMX 512 data box. Data input and output, M20 provision holes with plugs. Voltage input and output, M20 provision holes with plugs. Up to six outputs to fi xtures, M20 provision holes with plugs. Please specify desired input voltage and fi nish. Refer to CBOX specifi cation sheet for details.
Leader Cable : LXTLCD___ Leader Cable for Lumencove® XT. Please add desired cable length : 10’, 25’ or 50’ [3m, 7.6m or 5.2m] standard lengths Sealing endcap is mandatory for any unused connector. (1) included with every leader cable
Jumper Cable : LXTJCD___ Jumper Cable for Lumencove® XT. Please add desired cable length : 2’ or 4’ [0.6m, 1.2m] standard lengths
3/6 2014.10.02 EM - R9
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumencove®XT
SPECIFICATION SHEET
EXTERIOR DYNAMIC WHITE
RESOLUTION DETAILS
1FT - Resolution per foot: each foot is addressed independently (recommended for most installations). DMX ADDRESSES: 1, 2, 3 (color 1)
4, 5, 6 (color 2)
7, 8, 9 (color 3)
10, 11, 12 (color 4)
TOP VIEW
13, 14, 15 (color 5)
16, 17, 18 (color 6)
19, 20, 21 (color 7)
22, 23, 24 (color 8)
TOP VIEW
LXT 48 inches
LXT 48 inches
1FX - Resolution per fixture: each fixture is addressed independently DMX ADDRESSES: 4, 5, 6 (color 2)
1, 2, 3 (color 1)
TOP VIEW
TOP VIEW
LXT 48 inches
LXT 48 inches
*Warning: resolution is a factory setting and cannot be changed in the field.
4/6 2014.10.02 EM - R9
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumencove®XT
SPECIFICATION SHEET
EXTERIOR DYNAMIC WHITE
TYPICAL WIRING DIAGRAMS
Star Layout (DMX)
*Make sure that the addition of all cable lengths and fixture lengths for each run do not exceed the recommended limit.
Sealing end cap
Leader cable #16-5
®
100-277V Data input
CBOX
Maximum run length, 8A maximum - Lumencove XT RO 6W/ft Cable length/Voltage
120V
240V
277V
10ft leader cable
148ft
170ft
170ft
50ft leader cable
139ft
170ft
170ft
Maximum run length, 8A maximum - Lumencove
®
DMX Lumentouch 2.0 input
XT HO 12W/ft
10ft leader cable
75ft
153ft
170ft
50ft leader cable
71ft
147ft
170ft
100-240V
® ASHRAE Code Compliant- Lumencove XT 5W/ft Maximum run length, 8A maximum Cable length/Voltage
120V
240V
277V
10ft leader cable
170ft
170ft
170ft
50ft leader cable
164ft
170ft
170ft
*Up to 170 individually addressable 1 foot sections per DMX run. *Maximum run length calculations are typically based on 4ft fixtures. Consult factory for specific installation requirements.
Daisy Chain Layout (DMX) Lumentouch 2.0
100-240V Leader cable #16-5
Sealing end cap
Leader cable #16-5
5/6 2014.10.02 EM - R9
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
100-277V Data CBOX input
100-277V Data CBOX input
lumencove®XT
SPECIFICATION SHEET
EXTERIOR DYNAMIC WHITE
HOW TO ORDER
Select: Select:
LXT
Select:
Select: Select: Select:
Select:
Select:
Housing
Voltage
Length
Colors and color temperatures
Control
Mounting Option
Finish
Option
1
2
3
4
5
6
7
8
1
6
Housing:
Mounting Option:
LXT ASHRAE - Lumencove® XT, 5W/ft ASHRAE compliant
SAM - Slim Adjustable Mounting
LXT RO - Lumencove® XT Regular Output 6W/ft
UMP - Fixed Mounting (Suitable to use when 3GV option is specified)
LXT HO - Lumencove XT High Output 12W/ft ®
UMAS - Universal Adjustable Mounting (Suitable to use when 3GV option is specified)
2
WAM2 - Adjustable Wall Mounting 2”
Voltage: 100 - 100 volts
220 - 220 volts
120 - 120 volts
240 - 240 volts
208 - 208 volts
277 - 277 volts
WAM6 - Adjustable Extended Arm Mounting 6” WAM12 - Adjustable Extended Arm Mounting 12”
7
3
Finish: SI - Silver SandText BK - Black SandText WH - White CC - Custom (please specify RAL color)
Length: 12 - 13 3/8 inches (340mm) (1.4 kg/3 lbs) 24 - 25 3/8 inches (645mm) (2.1 kg/4.6 lbs) 36 - 37 3/8 inches (949mm) (3.30 kg/7.2 lbs) 48 - 49 3/8 inches (1254mm) (4.08 kg/9 lbs)
8
4
Option: Colors and Color temperatures: DWW - Dynamic warm white color temperature ranging from 2200K to 3000K (available in 5W/ft or 12W/ft versions).
CRC - Corrosion-resistant Coating 3GV - 3G ANSI C136.31 Vibration Rating N.B. Available with UMP and UMAS mounting options only.
DWH - Dynamic white color temperature ranging from 2700K to 6500K.
5
Control: DMX 1FT - Resolution per foot DMX 1FX - Resolution per fixture
6/6 2014.10.02 EM - R9
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
