Transcript
lumenfacade™
SPECIFICATION SHEET
HORIZONTAL DYNAMIC WHITE PRELIMINARY
Client:
Project name: Order #:
Type:
Qty:
FEATURES AND BENEFITS
Physical : • • • • • • • • • •
Low copper content extruded aluminum housing Available in 1’, 2’, 3‘ or 4’ sections Electro-statically applied polyester powder coat finish Machined aluminum end caps and silicone gaskets Stainless steel hardware Clear tempered glass 10° x 10°, 10° x 60°, 30° x 60° or 60° x 60° optics Right or left feeding side options available IP66 Corrosion-resistant option for marine environments
Wiring detail - female pin
Performance : • • • • •
Variable color temperature: 2700K - 6500K Lumen maintenance L70 @ 25°C - 120,000 hrs 12 LEDs/ft (4x 2700K, 4x 4000K, 4x 6500K) Resolution per foot or per fixture (see page 5) Operating temperatures: -25° C to 50° C [-13F to 122F]
American Color Code 1 5
Electrical : • • • • •
4
Line voltage luminaire for 120 to 277V Power and data in 1 cable (#16-5) Up to 78 feet with 1 power & data feed 17.25W/ft DMX 512 ready
3 13 " 8 [340mm]
2" [51mm]
1" 4 [7mm] Minimum spacing 4" [102mm]
3 3 3 25 " ,37 " ,49 " 8 8 8 [645mm, 949mm, 1254mm]
2 PIN ID / WIRE COLOR / USE 3 1 RED 0-10V / DATA + ORANGE 0-10V / DATA 2 3 BLACK LIVE 120-277V 4 GREEN GROUND 5 WHITE NEUTRAL
MALE INPUT CONNECTOR
3 " 216 [56mm] TOP VIEW
FRONT VIEW
SIDE VIEW
5 year warranty 1/7 2014.05.27 EM - R7
45 " 16 [110mm]
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
21 " 8 [54mm]
lumenfacade™
SPECIFICATION SHEET
HORIZONTAL DYNAMIC WHITE PRELIMINARY
MOUNTING OPTIONS
3/4” [19mm]
3/8” [10mm] 3 " 8 [10mm]
3 1/2” [89mm] 2 7/8” [73mm]
TOP VIEW 2X 9/32” THRU ALL FRONT VIEW 1 2 " 2 [64mm]
UMP Fixed Mounting
SIDE VIEW
UMP Mounting Hole Pattern
90°
3/16” [5mm]
3/4” [19mm] 3/8” [10mm]
3/8” [10mm]
TOP VIEW 2 1/2” [64mm]
180°
°0 FRONT VIEW
SIDE VIEW
UMAS Universal Adjustable Mounting
1 3/4” [45mm] 2X 9/32” THRU ALL
UMAS Mounting Hole Pattern 3/8” [10mm]
TOP VIEW 33°
0°
66°
2" [51mm] 2 1/2” [64mm] FRONT VIEW
1 3/4” [44mm]
SIDE VIEW
WAM2 Adjustable Wall Mounting 2 inches
2X 1/4” THRU ALL
WAM Mounting Hole Pattern
OPTION 6" [152mm]
ETE - End-to-end configuration, no jumper cable needed. 16” cable included at input.
top view
2/7 2014.05.27 EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Minimum coil dimension
lumenfacade™
SPECIFICATION SHEET
HORIZONTAL DYNAMIC WHITE PRELIMINARY
FEEDING SIDE
*Fixture’s feeding side is based on uplight installations. Feeding sides are reversed when fixture is used in a downlight application.
POWER IN RIGHT TOP VIEW
FRONT VIEW
RIGHT (Fixture pointing upwards)
RF Right Feeding side fixed mounting shown
POWER IN LEFT TOP VIEW
FRONT VIEW
LEFT (Fixture pointing upwards)
LF Left Feeding side fixed mounting shown
LOUVER ACCESSORY INSTALLATION DETAIL
9 9 9 9" ,25 " ,37 " , 49 " 16 16 16 16 [344mm, 649mm, 954mm, 1258mm] 13
4" [102mm]
3 " 2 8 [60mm] TOP VIEW 4 1 " 2 [114mm]
FRONT VIEW
RIGHT VIEW
LOGHRD Radial Louver for Lumenfacade Horizontal (2 mounting screws included) (see page 4 for ordering code) 3/7 2014.05.27 EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
2 1" 8 [54mm]
lumenfacade™
SPECIFICATION SHEET
HORIZONTAL DYNAMIC WHITE PRELIMINARY
ACCESSORIES Order separately
Control Systems: LTO2 Lumentouch 2.0 is a wall mount DMX 512 controller keypad LCU Lumencue is a USB / mini SD DMX 512 controller LID LumenID is a diagnostic and addressing DMX 512 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. LTN Lumentone is a simple pre-programmed DMX 512 controller with a push button rotary dial and live feedback.
CBOX : iCBOX-___V-___-___ Interior DMX 512 data box. Data input and output, M20 provision holes with plugs. Voltage input and output, M20 provision holes with plugs. Up to six outputs to fi xtures, M20 provision holes with plugs. Please specify desired input voltage and fi nish. Refer to iCBOX specifi cation sheet for details. CBOX-___V-___-___ DMX 512 data box. Data input and output, M20 provision holes with plugs. Voltage input and output, M20 provision holes with plugs. Up to six outputs to fi xtures, M20 provision holes with plugs. Please specify desired input voltage and fi nish. Refer to CBOX specifi cation sheet for details.
Leader Cable : LOGLCD___ Leader Cable for Lumenfacade. Please add desired cable length : 10, 25 or 50 feet standard length Sealing endcap is mandatory for any unused connector. (1) included with every leader cable LOGLCD___-ETE Leader Cable for Lumenfacade, ETE option. Please add desired cable length : 10, 25 or 50 feet standard length Sealing endcap is mandatory for any unused connector. (1) included with every leader cable
Jumper Cable : LOGJCD___ Jumper Cable for Lumenfacade. Please add desired cable length : 2 or 4 feet LOGJCD___-ETE Jumper Cable for Lumenfacade, ETE option. Please add desired cable length : 2 or 4 feet standard length
Radial Louver : LOGRD___-___ Radial louver for Lumenfacade Horizontal. 1. Please specify desired nominal length: 1’, 2’, 3’ or 4’. 2. Please specify finish as BK - Black SandText (Custom color available on request, please specify as CC together with RAL color : _________)
4/7 2014.05.27 EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
SPECIFICATION SHEET
HORIZONTAL DYNAMIC WHITE PRELIMINARY
RESOLUTION DETAILS
1FT - Resolution per foot: each foot is addressed independently (recommended for most installations) DMX ADDRESSES: TOP VIEW
1,2,3 (color 1)
4,5,6 (color 2)
7,8,9 (color 3)
10,11,12 (color 4)
13,14,15 (color 5)
LOGH 48 inches
16,17,18 (color 6)
19,20,21 (color 7)
LOGH 48 inches
1FX - Resolution per fixture: each fixture is addressed independently DMX ADDRESSES: TOP VIEW
1,2,3 (color 1)
4,5,6 (color 1)
LOGH 48 inches
LOGH 48 inches
*Warning: resolution is a factory setting and cannot be changed in the field.
5/7 2014.05.27 EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
22,23,24 (color 8)
lumenfacade™
SPECIFICATION SHEET
HORIZONTAL DYNAMIC WHITE PRELIMINARY
TYPICAL WIRING DIAGRAM
Daisy Chain Layout (DMX) Sealing end cap
Sealing end cap
Jumper cable #16-5
Lumentouch
120-240V
Jumper cable #16-5 Leader cable #16-5
Leader cable #16-5
Maximum run length by 15A circuit Cable length/Voltage
120V
240V
277V
10ft leader cable
78ft
100ft
112ft
50ft leader cable
68ft
80ft
88ft
*Up to 170 individually addressable 1 foot sections per DMX run. Consult factory for specific applications.
6/7 2014.05.27 EM - R7
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
CBOX
CBOX
120-277V Data input
120-277V Data input
lumenfacade™
SPECIFICATION SHEET
HORIZONTAL DYNAMIC WHITE PRELIMINARY
HOW TO ORDER LOGH
Select:
Select:
DWH
Select:
Select:
Select:
Select:
Select:
Select:
Housing
Voltage
Length
Colors and color temperatures
Resolution
Optic
Feeding side
Mounting Option
Finish
Option
1
2
3
4
5
6
7
8
9
10
1
7
Housing:
Feeding Side: Please specify one of the following:
LOGH - Lumenfacade Horizontal ™
(Right Feeding side is standard unless otherwise specified)
2
LF - Left Feeding side RF - Right Feeding side
Voltage: 120 - 120 volts 208 - 208 volts 220/240 - 220 to 240 volts 277 - 277 volts
8
Mounting Option: UMP - Fixed Mounting
3
UMAS - Universal Adjustable Mounting WAM2 - Adjustable Wall Mounting 2”
Length:
WAM6 - Adjustable Extended Arm Mounting 6”
12 - 13 3/8 inches (340mm) (2 kg/4.5 lbs) 24 - 25 3/8 inches (645mm) (3.17 kg/7 lbs) 36 - 37 3/8 inches (949mm) (4.75 kg/10.5 lbs) 48 - 49 3/8 inches (1254mm) (6.35 kg/14 lbs)
WAM12 - Adjustable Extended Arm Mounting 12”
9
4
Finish: SI - Silver SandText BK - Black SandText WH - White CC - Custom (please specify RAL color)
Colors and Color temperatures: DWH - Dynamic white color temperature ranging from 2700K to 6500K.
5
10
Resolution:
Option:
1FT - Resolution per foot
ETE - End - to - end configuration, no jumper cable needed CRC - Corrosion-resistant Coating
1FX - Resolution per fixture
6
Optic: 10x10 - 10° x 10° *For best results use 10° x 10° fixtures at a 6-inch (15cm) setback from surface. Contact factory for application support. 10x60 - 10° x 60° 30x60 - 30° x 60° 60x60 - 60° x 60° 7/7 2014.05.27 EM - R7
10°
10°
10°
60°
30°
60°
60°
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
60°
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
