Transcript
lumenfacade™
SPECIFICATION SHEET
INTERIOR COLOR CHANGING
Client:
Project name: Order #:
Type:
Qty:
FEATURES AND BENEFITS
Physical : • • • • • • • •
Low copper content extruded aluminum housing Available in 1’, 2’, 3‘ or 4’ sections Electro-statically applied polyester powder coat finish Aluminum end caps Stainless steel hardware Clear acrylic lens 10° x 10°, 10° x 60°, 30° x 60° or 60° x 60° optics Interior applications only
Performance : • • • • •
Color mixing options: RGB (3 channels) or RGBW (4 channels) 1,441 delivered lumens and 8,700 candelas at nadir (RGB full white, 4’ unit, 10° x 60° optic) Lumen maintenance 120,000 hrs [L70 @ 25°C] Resolution per foot or per fixture (see page 4) Operating temperatures: -25° C to 50° C [-13F to 122F]
Wiring detail WHITE WIRE - NEUTRAL (N) GREEN WIRE - GROUND ( ) BLACK WIRE - L (1)
Electrical : • • • • •
BROWN WIRE - 0-10V / DATA - (2)
Line voltage luminaire for 100 to 277V Power and data in 1 cable (#16-5) Up to 112 feet with 1 power/data feed 17.25W/ft DMX 512 ready
RED WIRE - 0-10V / DATA + (3)
CE wiring detail BLUE NEUTRAL (N) GREEN/YELLOW - GROUND ( ) BROWN WIRE - L (1) GRAY WIRE - 0-10V / DATA - ( 2) BLACK WIRE - 0-10V / DATA + (3)
1 Minimum 4 " ETE spacing [7mm]
3 3 3 3 12 8 ", 24 8 ", 36 8 ", 48 8 " [314mm, 619mm, 924mm, 1229mm]
3" [76mm]
TOP VIEW
3 16 " [56mm]
2 3 4 " [70mm] 2
FRONT VIEW
2 1" 16 [52mm]
5 year warranty 1/6 2014.05.22 EM - R19
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
SIDE VIEW
Dimming Fixture (5-pin connector shown)
lumenfacade™
SPECIFICATION SHEET
INTERIOR COLOR CHANGING
MOUNTING OPTIONS
3 " 4 [19mm]
TOP VIEW
31" 4 [83mm] 21" 2 [64mm] R1" 8 [4mm]
SAM Slim Adjustable Mounting
1 8" [4mm]
2 13 " 16 [71mm]
SAM Mounting Hole Pattern
11 " 16 [18mm]
3/4” [19mm]
3/8” [10mm]
3 1/2” [89mm] 2 7/8” [73mm]
3 " 8 [10mm]
UMP Fixed Mounting
2X 9/32” THRU ALL
3 " 16 [5mm]
UMP Mounting Hole Pattern 0° 3/16” [5mm] 3/8” [10mm]
1 " 2 [64mm] 2
3/4” [19mm]
3/8” [10mm]
2 1/2” [64mm]
UMAS Universal Adjustable Mounting
1 3/4” [45mm]
180° 2X 9/32” THRU ALL
2" [51mm]
UMAS Mounting Hole Pattern
63°
1 1/16” [27mm]
0°
WAM2 Adjustable Wall Mounting
-63°
3/8” [10mm]
2 1/2” [64mm]
2X 1/4” THRU ALL
6" or 12"
1 3/4” [44mm]
[153 or 305mm] 116°
0°
WAM6 or WAM12 Adjustable Extended Arm Mounting 2/6 2014.05.22 EM - R19
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
-116°
WAM Mounting Hole Pattern
lumenfacade™
SPECIFICATION SHEET
INTERIOR COLOR CHANGING
ACCESSORIES Order separately
Control Systems: LTO2 Lumentouch 2.0 is a wall mount DMX 512 controller keypad LCU Lumencue is a USB / mini SD DMX 512 controller LID LumenID is a diagnostic and addressing DMX 512 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. LTN Lumentone is a simple pre-programmed DMX 512 controller with a push button rotary dial and live feedback.
CBOX : iCBOX-___V-___-___ Interior DMX 512 data box. Data input and output, M20 provision holes with plugs. Voltage input and output, M20 provision holes with plugs. Up to six outputs to fi xtures, M20 provision holes with plugs. Please specify desired input voltage and fi nish. Refer to iCBOX specifi cation sheet for details. CBOX-___V-___-___ DMX 512 data box. Data input and output, M20 provision holes with plugs. Voltage input and output, M20 provision holes with plugs. Up to six outputs to fi xtures, M20 provision holes with plugs. Please specify desired input voltage and fi nish. Refer to CBOX specifi cation sheet for details.
Leader Cable : LOGiLCD___ Leader Cable for Lumenfacade Interior. Please add desired cable length : 10, 25 or 50 feet Sealing endcap is mandatory for any unused connector. (1) included with every leader cable
Jumper Cable : LOGiJCD___ Jumper Cable for Lumenfacade Interior. Please add desired cable length : 1, 2, 4, 8, 10, 15 or 20 feet
3/6 2014.05.22 EM - R19
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
SPECIFICATION SHEET
INTERIOR COLOR CHANGING
RESOLUTION DETAILS
1FT - Resolution per foot: each foot is addressed independently (recommended for most installations). DMX ADDRESSES:
1,2,3 (color 1) 4,5,6 (color 2) 7,8,9 (color 3) 10,11,12 (color 4)
LOGi 48 inches RGB color mixing option
13,14,15 (color 5) 16,17,18 (color 6) 19,20,21 (color 7)
1,2,3,4 (color 1) 5,6,7,8 (color 2)
22,23,24 (color 8) 9,10,11,12 (color 3) 13,14,15,16 (color 4)
LOGi 48 inches RGB color mixing option 17,18,19,20 (color 5)
LOGi 48 inches RGBW color mixing option
21,22,23,24 (color 6) 25,26,27,28 (color 7) 29,30,31,32 (color 8)
LOGi 48 inches RGBW color mixing option
1FX - Resolution per fixture: each fixture is addressed independently DMX ADDRESSES: 1,2,3 (color 1)
LOGi 48 inches RGB color mixing option 4,5,6 (color 2)
1,2,3,4 (color 1)
LOGi 48 inches RGB color mixing option LOGi 48 inches RGBW color mixing option 5,6,7,8 (color 2)
LOGi 48 inches RGBW color mixing option
*Warning: resolution is a factory setting and cannot be changed in the field. 4/6 2014.05.22 EM - R19
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
SPECIFICATION SHEET
INTERIOR COLOR CHANGING
TYPICAL WIRING DIAGRAMS
Star Layout (DMX)
LOGiLCD #16-5
100-277V Data input
CBOX
Maximum run length by 15A circuit Cable length/Voltage
120V
240V
277V
10ft leader cable
78ft
100ft
112ft
50ft leader cable
68ft
80ft
88ft
*Up to 170 individually addressable 1 foot sections per DMX run. *Consult factory for specific applications.
Daisy Chain Layout (DMX)
Lumentouch 2.0
LOGiLCD #16-5 CBOX
100-240V DMX 100-277V
100-277V
5/6 2014.05.22 EM - R19
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
DMX input
Lumentouch 2.0
100-240V
lumenfacade™
SPECIFICATION SHEET
INTERIOR COLOR CHANGING
HOW TO ORDER
Select:
LOGi
Select:
Select:
Select:
Select:
Select:
Select:
Housing
Voltage
Length
Colors and color temperatures
Resolution
Optic
Mounting Option
Finish
1
2
3
4
5
6
7
8
1
6
Housing:
Optics:
LOGi - Lumenfacade interior 17.25W/ ft
10x10 - 10° x 10°
™
*For best results use 10° x 10° fixtures at a 6-inch (15cm) setback from surface. Contact factory for application support.
2
Voltage: 100 - 100 volts
220 - 220 volts
120 - 120 volts
240 - 240 volts
208 - 208 volts
277 - 277 volts
10x60 - 10° x 60° 30x60 - 30° x 60° 60x60 - 60° x 60°
10°
10°
10°
60°
30°
60°
60°
60°
3 7
Length:
Mounting Option:
12 - 12 3/8 inches (314mm) (0.95 kg/2.1 lbs) 24 - 24 3/8 inches (619mm) (1.68 kg/3.7 lbs) 36 - 36 3/8 inches (924mm) (2.41 kg/5.3 lbs) 48 - 48 3/8 inches (1229mm) (3.08 kg/6.8 lbs)
SAM - Slim Adjustable Mounting UMP - Fixed Mounting UMAS - Universal Adjustable Mounting
4
WAM2 - Adjustable Wall Mounting 2”
Colors and Color temperatures:
WAM6 - Adjustable Extended Arm Mounting 6”
RGB - Additive red, green and blue RGBW - Additive red, green, blue and white 4000K
WAM12 - Adjustable Extended Arm Mounting 12”
8
5
Finish:
Resolution:
SI - Silver SandText BK - Black SandText WH - White CC - Custom (please specify RAL color)
1FT - Resolution per foot 1FX - Resolution per fixture
6/6 2014.05.22 EM - R19
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
