Transcript
Tapapn For: Belden 9116 West Penn 6100 General Cable C5775775
Southwire 57569801 Southwire 57569804 Commscope 5730
Coleman 92003 Belden 1829AC
SPECIFICATION SHEET 100 Bradley Parkway • Blauvelt, NY 10913 Phone: 1-800-WIRE-911 • Fax: 1-845-353-9315
TAPPAN Spec. C40055.1 Update 1.3 5/16/2013
SERIES 6 - RG6/U BROADBAND COAX FOR CATV, MATV, AUDIO – VIDEO AND RADIO REQUENCY 75C 300V NON-PLENUM UL RATED
CONSTRUCTION:
18 AWG SOLID COPPER-COVERED STEEL, FOAM PE INSULATION, DUAL-FOIL TAPE PLUS 60% ALUMINUM BRAID SHIELD (DUAL SHIELD), PVC JACKET
INSULATION:
FOAM POLYETHYLENE
SHIELD(S):
BONDED DUAL FOIL TAPE PLUS 60% ALUMINUM BRAID (DUAL SHIELD)
JACKET:
PVC
NOMINAL DIAMETER(S):
CONDUCTOR: .040” INSULATION: .180” OVERALL: .270”
CABLE WT:
32 Lbs/1000Ft Approx (Net Weight)
TEMP/VOLTAGE:
75C / 300V
PRINT LEGEND:
“DUAL SHLDS RG6/U TYPE SWEPT TO 3 GHz” E118871 CM/CL2/CATV 18AWG (UL) c(UL) CMH RoHS COMPLIANT
NEC:
CM/CL2/CATV FOR PLENUM VERSION GO TO SPEC NO. D40018
COMPLIANCE:
UL 444 CM by (UL) / NEC ARTICLE 800/820 CSA CMH by c(UL) / RoHS
FLAME TEST:
UL 1685 Vertical Tray / CSA FT1
CAPACITANCE:
16.2 pF/ft Nominal
VEL OF PROP:
82%
IMPEDANCE:
75 OHMS
RESISTANCE:
30.41 OHMS D.C. PER 1000 FT @ 68 DEG. F (Max.)
TAPPAN PART No.:
18CCSRG6X2/CM/CL2
BLACK
* +/- 10% Manufacturing tolerance * On non-standard product, customer agrees to accept all lengths manufactured
ATTENUATION MHz dB/100ft 1 0.37 5 0.54 10 0.66 55 1.46 100 1.92 211 2.87 270 3.24 300 3.43 350 3.72 400 3.85 450 4.25 550 4.70 700 5.05 750 5.58 870 5.99 1000 6.50 1450 7.85 1800 8.86 2250 10.00 2500 10.63 3000 11.91
Tappan Wire & Cable Inc. provides information and specifications on an “as is” basis. Information in specifications described herein are subject to error and/or omission, and subject to change without notice. Although we make all efforts possible to ensure the accuracy and timeliness of the information, Tappan Wire & Cable, will not be held liable for any damages whatsoever, even if advised of the possibility of such damages, arising from the use, or inability to use, the information or specifications herein. Please refer to our “Website Use Policy”, listed on our website, www.tappanwire.com, under the Sales Support Section for full details, or contact your Tappan Representative. This drawing may contain patented or proprietary information. It is the property of Tappan Wire and must not be used in any way detrimental to Tappan Wire. Acceptance by signature of this drawing will be considered as an agreement of and acceptance of the foregoing. Update 1.3 5/16/2013 Logo & Format.
