Transcript
Specification Sheet
KD-VP6
KD-VP8
KD-VP6 Video Processor converts Composite/S-Video/Component Inputs to Component Output
KD-VP8 Video Processor converts Composite/ S-Video/Component Inputs to Component/ HDMI/CAT5/CAT5E/CAT6/CAT7 Outputs
Product Description: ›
›
›
›
KD-VP6 & KD-VP8 Video Processors convert standard definition NTSC 480i, 480p and PAL 576i, 576p analog video sources to component video. Additionally, the KD-VP8 includes HDMI and HDMI over CAT 5 outputs. KD-VP6 & KD-VP8 feature IAS™ Intelligent Auto Sense signal detection and switching, pushbutton control, statusmonitoring LED’s and RS-232 and IR remote control. KD-VP6 & KD-VP8 processors are expandable, individually addressable, and the KD-VP8 is DVI-D compatible when used with Key Digital® adapters and cables. KD-VP6 & KD-VP8 are engineered to meet rigorous Key Digital® design and test criteria to produce crystal-clear, pristine picture quality.
Video Output Formats
Status and Control
KD-VP6
›
›
›
›
›
›
› › › › › › ›
Converts Composite, S-Video and Component video to Component output Converts Composite, S-Video and Component video to HDMI output (KD-VP8 only) HDMI or HDMI over CAT5 output selectable via a slide switch (KD-VP8 only). Accepts analog SD NTSC 480i, EDTV 480p, PAL 576i and EDTV 576p video formats Offers user controlled de-interlacing available on Component output only IAS™ Intelligent Auto Sense switches to active input Pushbutton control, and the corresponding status LEDs Easy-to-operate IR remote control Wired IR remote control port RS-232 control port, compatible with all control systems Field upgradable firmware [see note 1] Built-in mounting flanges
Video Input Formats ›
Analog video inputs: ➔ Composite Video (CVBS) – NTSC 480i and PAL 576i ➔ S-Video – NTSC 480i and PAL 576i ➔ Component Video – NTSC 480i, EDTV 480p, PAL 576i, EDTV 576p
›
Note: If Input is Progressive, then Output is Progressive
KD-VP8 ›
Component Video – NTSC 480i, EDTV 480p, PAL 576i, EDTV 576p Note: If Input is Progressive, then Output is Progressive
›
›
› ›
HDMI – NTSC 480i, EDTV 480p, PAL 576i, EDTV 576p Note: Output Format = Input Format
›
CAT5, Data (Video) & Control (DDC)– NTSC 480i, EDTV 480p, PAL 576i, EDTV 576p
›
Note: Output Format = Input Format
Product Features: ›
Component Video – NTSC 480i, EDTV 480p, PAL 576i, EDTV 576p
Connectors ›
The inputs consist of the following connectors: ➔ 1 RCA: CVBS Composite Video (Yellow) ➔ S-Video ➔ 3 RCA: Y (Green), Pb (Blue), Pr (Red)
KD-VP6 ›
The outputs consist of the following connectors: ➔ 3 RCA: Y (Green), Pb (Blue), Pr (Red)
KD-VP8 ›
› › ›
The output consists of the following connectors: ➔ Y (Green), Pb (Blue), Pr (Red) ➔ HDMI ➔ CAT5 Data & Control RS-232C: Female D-sub 9-pin 5-pin DIN power connector for external AC-DC power supply 3.5 mm jack for serial, wired IR, Xantech compatible input
›
User-selectable input video source: ➔ Pushbutton control, and corresponding LED’s for status User-selectable HDMI or CAT5 Data & Control Output (KD-VP8 Only) Progressive (EDTV) or Interlaced (SDTV) output mode LED indicator LED indicates Progressive Input Active IR remote control: ➔ Separate front- and rear-panel IR sensors provided ➔ Wired IR serial connector provided RS-232 port: ➔ Compatible with all control systems: AMX, Crestron, Elan, Control4, Xantech etc. ➔ Used for Firmware upgrades Each unit (up to 99 on the same IR network) is individually addressable using the IR remote control
Mechanical › › ›
› › ›
Operating Temperature Range 0° – 70° C (32° – 158° F) No fan noise Product Size: 17 x 11x 1.5 inches (excluding mounting flanges) Product Weight: 8 lbs. (excluding external power supply) Enclosure type: Metal Input power: External AC-DC power supply included (5 Volt DC @ 5 Amps, 110-240 VAC, 50-60 Hz)
[1] Contact Key Digital® (
[email protected]) with the Serial Number of your unit to determine the correct Firmware Upgrade procedure for your unit. Check our web site at www.keydigital.com for Firmware Upgrade instructions and notification of any available Firmware Upgrades for your unit.
Specification Sheet Home Theater Application
Model: KD-VP6 Projector
Co mp one nt
Corporate Office Application
Model: KD-VP8
Plasma
IR Control Wired IR
Plasma
back
KD-VP6
RS232 Control
front
IR Control
VCR
Co S-V
ide
KD-VP6
HD MI
Game Console
Camera
mp
one
KD-CAT5xHDMI
nt
HD
o Co
mp
MI/ DV I-D
Plasma
osit
Co
e
mp
one
CA T5 nt
CAT5 Data CAT5 Control
IR Control Wired IR
back
KD-VP8
RS232 Control
front
IR Control
VCR
Game Console
Camera
Co mp one nt ide o
S-V
KD-VP8
Key Digital Exclusive Technologies ®
521 East 3rd Street, Mount Vernon, NY 10553 Phone :: 914.667.9700 Fax :: 914.668.8666 Web :: www.keydigital.com
Co
mp osit e
*To connect DVI Video use HDMI < > DVI adapter cables
Supported Technologies
