Specification Sheet - Wistar Equipment, Inc.

Transcript

Doc.No.NPD-EPSAC-SS-AC-(E55)-2012-02-0541 SPECIFICATION SHEET Product Electric Powered Lubricated Screw Air Compressor S.No Description Model 2 FAD - Free Air Delivery 3 4 5 Working Pressure Unloading Pressure Nominal Power Supply Conditions 6 Airend shaft power 7 8 9 10 Package Input power @ full load Package Input power @ Zero flow Specific Power Consumption @ full load Capacity Control System 11 Main Motor rating 12 13 14 15 Type of Motors (Main Drive & Cooling Fan drive) Insulation and Protection of Main Motor Rated Speed of Main Motor Frame size / Mounting type/ Efficiency of main motor Max allowable package current with Fan at nominal power supply Type of starter for main motor Rated Speed of Fan Motor Fan Motor Ratings x No of Fans Type of coupling Flow rate of cooling air @ Static Pressure (Pa) Heat load capacity of oil and after coolers Tank Oil Fill Capacity Tank Sump Capacity Discharge Oil Temperature 17 18 19 20 21 22 23 24 25 Date(org) :15/05/2012 Revision : R03 Date(Rev):22/05/2014 Units 1 16 Type : EG 55 460V / 60HZ cfm m3/min psi.g psi.g hp kW hp (kW) hp (kW) kW/100cfm hp (kW) rpm Data EG 55-100 375.00 10.62 100.0 115.0 EG 55-125 EG 55-150 EG 55-175 347.00 283.00 262.00 9.83 8.01 7.42 125.0 150.0 175.0 140.0 165.0 190.0 460V (+/-10%), 60Hz (+/-5%), 3 Phase 83.80 84.80 84.50 84.90 62.49 63.24 63.01 63.31 91.04(67.89) 92.09(68.67) 91.77(68.43) 31.86(23.76) 32.23(24.03) 32.12(23.95) 18.10 19.79 24.18 26.12 # Modulation system with 100% to 60% capacity control # < 60%: Load/unload 75(55.95)Normal Rating with SF1.15 Continuous duty (SF 1.2 intermittent duty) TEFC (Integrated) Class F / IP55 1775 364/5T / B35T/95.4% Amps rpm hp (kW) cfm BTU/hr gal gal °F 100.7 WYE DELTA 1480 1.6 (1.2) - (460V) X 2 Fans FLEXIBLE JAW COUPLING WITH "T" CUSHION ELEMENT 5885 @160Pa 184938 & 36169 7.92 7.92 Minimum: Above PDP at given pr. & 90% RH, Maximum : Ambient +104.4 Ambient +18 69 77.1 X 49.8 X 69 0.39 <1.0 1 1/2" NPT Thread 26 Maximum allowable air temperature at outlet °F 27 Noise Level of the Compressor dB (A) 28 Overall dimensions of the unit, L x B x H inch 29 Maximum Vibration level inch/sec 30 Oil Carry Over ppm 31 Air outlet port size inch Note :- 1. Reference standard for FAD and SPC : ISO : 1217/ANNEXURE 'C' 2. Reference standard for Noise Level : PNEUROP/PN8NTC2.2 & ISO 2151 ,Second Edition 3. Reference standard for Vibration : IS : 12075 4. Reference standard for Air Purity : ISO 8573-1 Prepared By Corporate Approved By All data and information in this sheet are confidential and property of ELGI EQUIPMENTS LIMITED This is System Generated Document and hence Signature is not required Jayaraj B.