Transcript
Avnet Embedded. Support Around The Board™
SPECIFICATION
UMSH-8253MD-5T Date: November 2012
www.avnet-embedded.eu
If you require a touch panel solution. For information ontouch sensors, sensor driving and touch panel bonding solutions, scan the QR code or click the URL www.avnet-embedded.eu/products/displays/.html
SPECIFICATION Nov-23-2012
OF LIQUID CRYSTAL DISPLAY MODULE CUSTOMER :
Model No. : Model version
URT-STD
UMSH-8253MD-5T : 0 6
Document Revision :
CUSTOMER APPROVED SIGNATURE
This specification need to be signed by purchaser or customer as a specification of products production and delivery from URT. Without signature of this specification , any purchase order for this model no. will be treated and considered that this specification is automatically acknowledged and accepted by purchaser or customer.
U.R.T.
Allen Wang APPROVED
UNITED RADIANT TECHNOLOGY CORPORATION
George Tseng CHECKED
Angus Chiu CHECKED
Jenny Wang PREPARED
Nov-23-2012 Date
COMPANY : No. 2,Fu-hsing Road,Taichung Econamic Processing Zone,Tantzu,Taichung,Taiwan,R.O.C. TEL: 886-4-25314277
U.R.T.
FAX: 886-4-25313067
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 1
This document has been signed by Digital Signature Approval System www.avnet-embedded.eu
Revision record Document
Model No.
Revision
Version No.
0
1
2
3
4
5
6
UMSH-8253MD-T (UFSH-K093EY-FT) Version No. 0 UMSH-8253MD-1T (UFSH-K093EY-FT) Version No. 0 UMSH-8253MD-2T (UFSH-K093EY-FT) Version No. 0 UMSH-8253MD-3T (UFSH-K093EY-FT) Version No. 0 UMSH-8253MD-4T (UFSH-K093EY-FT) Version No. 0 UMSH-8253MD-5T (UFSH-K093EY-FT) Version No. 0 UMSH-8253MD-5T (UFSH-K093EY-FT) Version No. 0
U.R.T.
Description
Revision by
4.3” TFT.
Remove the touch panel. 1. Add Micro Reflective film on LCD. 2. Modify the module number from UMSH-8253MD-1T to UMSH-8253MD-2T. 1. Add the capacitive touch panel. 2. Modify the module number from UMSH-8253MD-1T to UMSH-8253MD-3T. 1. Change the backlight suppliers. 2. Modify the module number from UMSH-8253MD-1T to UMSH-8253MD-4T. 1. Add the touch panel. 2. Modify the module number from UMSH-8253MD-4T to UMSH-8253MD-5T. 1. Add the Outline dimension.
Ring Hsu Zi Xin Ou 23-Jan-2009 Ring Hsu Zi Xin Ou 22-Jan-2009 Ring Hsu Zi Xin Ou 30-Apr-2009 Ring Hsu Zi Xin Ou 17-Aug-2010 Bo Lun Lan Zi Xin Ou 25-Jul-2011 Bo Lun Lan Zi Xin Ou 25-Jul-2011 Bo Lun Lan Zi Xin Ou 23-Nov-2012
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012 Page: 2
www.avnet-embedded.eu
CONTENTS:
No. 1
Item BASIC SPECIFICATION 1.1 Mechanical Specification 1.2 Display Specification
1.3 Outline Dimension 1.4 Block Diagram 1.5 Interface Pin
Page 4 4 5~6 7
8
ELECTRICAL CHARACTERISTICS 2
2.1 Absolute Maximum Ratings 2.2 DC Characteristics
2.2.1 Back-light Characteristics 2.3 AC Characteristics 2.4 Touch Panel Specifications
9 10 10
11~13 14~15
OPTICAL CHARACTERISTICS 3
3.1 Condition
3.2 Definition of Optical Characteristics
U.R.T.
16
17~18
4
RELIABILITY
19
5
PRODUCT HANDING AND APPLICATION
20
6
DATECODE
21
7
PACKING & LOTNO
22~23
8
INSPECTION STANDARD
24~29
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 3 www.avnet-embedded.eu
1. BASIC SPECIFICATION 1.1 Mechanical specifications Nominal Dimension 4.3” diagonal
Unit -
480 x RGB x 272
Pixel
105.5 x 67.2 x 5.45
mm.
Active Area (W x H)
95.04 x 53.856
mm.
Pixel Size ( W×H )
0.198 x 0.198 16.7M
mm. color
Parallel 24-bit RGB
-
COG
-
77(TYP)
g
Descriptions
Note
LCD Type
a-Si TFT
-
LCD Mode
TN / Normal white
-
Items Active screen size Dot Matrix Module Size (W x H x T)
Color depth Interface Driving IC Package Module weight
1.2 Display specification Display
Transmissive
-
Polarizer Surface
Normal
-
Pixel arrangement
RGB-stripe
Polarizer Mode
Backlight Type Viewing Direction(Gray inversion)
LED
-
6 O'clock Direction
-
* Color tone is slightly changed by temperature and driving voltage.
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 4
www.avnet-embedded.eu
1.3 Outline dimension
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 5 www.avnet-embedded.eu
U.R.T.
LCM Bezel
LCD Active Area
T/P Active Area
Case Opening
LCD Viewing Area
T/P Viewing Area
LCD Module
Touch Panel
T/P Active Area : Means T/P guaranteed active area , where the feature and function of the T/P can be assured. Area A : Where the T/P can be operated but the feature and function are not guaranteed. Area B : This area is prohibited to contact , it is easy to hurt the ITO film and lose function once be touched . a.Customer should design the "Support " in between the case and T/P ,with sufficient thickness to ensure once the case was deformed or pressed unintendedly , the T/P can still work normally . b.Support need to be designed within the frame size. c.We suggest to the support thickness as 0.5mm , but customer should adapt suitable thickness according to the case deformation. (5) The best design of customer's case opening is suggest ed to cover the LCD Viewing area and aligned with the T/P Active Area ,or in between the dimension of LCD Viewing area and T/P Active Area . But once if the LCD Viewing area was smaller than T/P Active Area ,then the case opening should be aligned with LCD Viewing area . (6) Never use double sided tape or glue in between the support the ITO film , it will cause harm to ITO film or seperate the T/P with the ITO film.
(1) (2) (3) (4)
Frame
ITO Layer
ITO Glass
Support
ITO Film
Case
Insulation Area
Attention for Assembly and Operation
1.3 Outline dimension
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 6
www.avnet-embedded.eu
1.4 Block diagram:
G1
G2
480xRGBx272 Display Module
272
272
text
G544
S1
S720 G543
720
Driver
2
U.R.T.
2
8
8
8
TP(Y+)
TP(X+)
TP(Y-)
TP(X-)
NC
VS
HS
DISP
CLK
GND
B0~B7
G0~G7
R0~R7
VDD
GND
T/P
A
NC
NC
K
LED B/L
3
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 7 www.avnet-embedded.eu
1.5 Interface pin :
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 8 www.avnet-embedded.eu
2. ELECTRICAL CHARACTERISTICS 2.11 Absolute Maximum Ratings
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 9 www.avnet-embedded.eu
2.2 DC Characteristics
2.2.1 Back-light Characteristics
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 10
www.avnet-embedded.eu
2.3 AC Characteristics Parallel RGB Input Timing Requirement
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 11
www.avnet-embedded.eu
Interface Timing Chart
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 12
www.avnet-embedded.eu
Input Setup Timing Requirement
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 13
www.avnet-embedded.eu
2.4 Touch Panel Specifications Display Type
Descriptions
Note
4-wires Analog Resistive Touch Panel
-
ITO Film：T=0.188mm
-
ITO Glass：T=0.7mm
3H pencil, pressure 500g/45˚ (JIS-K5600) Stylus R0.8mm (Active Area toward
Structure
Surface Hardness Input mode
≧ 3H Stylus or Finger
Operating Force (Minimum Active Force)
Connector Type
FPC -
2.4.1 Electric Characteristics
Items Linearity
Terminal Resistance
U.R.T.
Descriptions
Note
X-axis≦1.5％ Y-axis≦1.5％
Active Area toward inner 2mm
X-axis：450～1050Ω
-
Y-axis：50～650Ω
-
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 14 www.avnet-embedded.eu
2.4.2 Durability Test Items
Condition Repeating impact the surface of touch panel 1,000k times by R8.0 silicon rubber under 250g loading and 2 times/sec speed.
Finger Touch Test
Drawing line in 30mm length at same location of touch panel surface 100k times by R0.8mm plastic stylus under 250g loading and 60mm/sec moving speed.
Pen Sliding Test
( Durability Test Position )
Touch Panel
(Pen Sliding Test)
Pen Sliding Test
Touch Panel
Finger Touch Test
U.R.T.
Center Point of Active Area (Finger Touch Test)
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 15
www.avnet-embedded.eu
3. OPTICAL CHARACTERISTICS 3.1 Characteristics
Electrical and Optical Characteristics No. Item 1
symbol / temp. Min.
4
-
5
-
Tf Θ2+
25 ℃ 0°
45
15 80
-
Θ2-
180°
45
80
-
Θ1+
270°
45
80
-
Θ1-
90°
45
80
-
Contrast Ratio
Cr
25 ℃
-
500
-
Red x-code
Rx
0.56
0.61
0.66
Red y-code
Ry
0.31
0.36
0.41
Green x-code
Gx
0.31
0.36
0.41
Green y-code
Gy
0.52
0.57
0.62
Blue x-code
Bx
0.10
0.15
0.20
Blue y-code
By
0.06
0.11
0.16
White x-code
Wx
0.27
0.32
0.37
White y-code
Wy
0.29
0.34
0.39
Y
200
240
-
cd/m2
80
-
-
%
Viewing Angle
Brightness 5
Unit
25 ℃
Ver. 3
Max.
Tr
Response Time
Hor. 2
Typ.
Brightness Uniformity
U.R.T .
25 ℃
25 ℃
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Note
ms
2
degree
3
-
4
5 -
6
Page: 16
www.avnet-embedded.eu
3.2 Definition of optical characteristics Measurement condition : 2
[Note 1] Definition of LCD Driving Vop and Waveform :
[Note 2] Definition of Response Time
[Note 3] Definition of Viewing Angle :
U.R.T
[Note 4] Definition of Contrast Ratio :
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012 Page: 17
www.avnet-embedded.eu
480mm
BM-7
[Note 5] Definition of measurement of Color Chromaticity and Brightness
LCD Module
[Note 6] Definition of Brightness Uniformity
1
2
3
4
5
6
H/4
Active Area Height : H
W/4
Minimum Brightness of Point 1~9 Brightness Uniformity = Maximum Brightness of Point 1~9
7
8
9
Active Area Width : W
BM-7
[Note 7] Definition of Measurement of Reflectance
480mm
W hite Light Source (Ring)
15 deg.
LCD Module or referance
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 18 www.avnet-embedded.eu
4. RELIABILITY : Item No 1 2 3 4 5 6
Items High temperature operating Low temperature operating High temperature storage Low temperature storage High temperature & humidity storage Thermal Shock storage
7
Vibration test
8
Drop test
9
Life time
Condition 70 ℃ , 200 hours -20 ℃ , 200 hours 80 ℃ , 200 hours -30 ℃ , 200 hours 60℃, 90%RH, 100 hours -30℃, 30min.<=> 80℃, 30min. 10 Cycles 10 => 55 =>10 => 55 => 10 Hz , within 1 minute Amplitude : 1.5mm. 15 minutes for each Direction ( X,Y,Z ) Packed, 100CM free fall, 6 sides, 1 corner, 3edges 50,000 hours 25℃ , 60%RH , specification condition driving
* One single product test for only one item. * Judgment after test : keep in room temperature for more than 2 hours. - Current consumption < 2 times of initial value - Contrast > 1/2 initial value - Function : work normally
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 19 www.avnet-embedded.eu
5. PRODUCT HANDLING AND APPLICATION □ PRECAUTION FOR HANDLING LCM ● The LCD module contains a C-MOS LSI. People who operate the LCM should wear ESD protection eguipement to prevent ESD hurt on products. ● Do not input any signal before power is turned on. ● Do not take LCM from its packaging bag until it is assembled. ● Peel off the LCM protective film slowly since static electricity may be generated. ● Pay attention to the humidity of the work shop, 50~60%RH is satisfactory. ● Use a non-leak iron for soldering LCM. ● Do not touch the display surface or connection terminals area with bare hands.Smudges on the display surface reduce the insulation between terminals. ● Cautions for soldering to LCM: Condition for soldering I/O terminals: Temperature at iron tip :350℃±15℃. Soldering time : 3~4sec./ terminals. Type of solder : Eutectic solder(rosin flux filled).
□ PRECAUTION IN USE OF LCM ● Do not contact or scratch the front surface and the contact pads of a LCM with hard ● ● ● ● ● ● ●
materials such as metal or glass or with one’s nail. To clean the surface , wipe it gently with soft cloth dampened by alcohol. Do not attempt to wiped off the contact pads. Keep LCM panels away from direct sunlight , also avoid them in high-temperature & high humidity environment for a long period. Do not drive LCM by DC voltage. Do not expose LCM to organic solvent. Liquid in LCM is hazardous substance. In case a contact with liquid crystal material is occured, be sure to immediately wash such material away by soap and water. The polarizer is easily damaged and should be handle with special care. Don’t press or rub it with hard objects.
□ PRECAUTION FOR STORING AND USE OF LCM ● To avoid degradation of the device , do not store the module under the conditions of direct sunlight , high temperature or high humidity . Keep the module in bags designed to prevent static electricity charging under low temperature / normal humidity conditions(avoid high temperature / high humidity and low temperature below 0℃) ● Never use the LCD , LCM under 45 Hz , the liquid crystal will decomposition and cause permently damage on display !!
□ USING ON MEDICAL CARE , SAFETY OR HAZARDOUS APPLICATION OR SYSTEM ● For the application in medical care, safety and hazardous prodcuts or systems, an
● ●
authorization from URT is required. URT will not responsible for any damage or loss which caused by the products without any authorization given by URT. This product is not allowed to be designed and used for military application and/or purpose. The delivery of this product to the countries and/or regions where the embargoes
are imposed by U.N. is prohibited. ●
The application and delivery of this product must comply with Startegic High-Tech Commodities (SHTC) export control and the sales to the embargoed and/or sanctioned countries or regions are strictly prohibited.
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 20
www.avnet-embedded.eu
6. DATE CODE OF PRODUCTS ● Date code will be shown on each product : ● YY MM DD - XXXX Year Month Day - Production lots
● Example: 121108 - 0003 ==> Year 2012, November,8th , Batch no.0003
Note ： The lot no. attached on the packing box will be used for tracking once the part is too small to print the date code.
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 21 www.avnet-embedded.eu
7. PACKING
Packing tray must be stacked with alternated direction to each others. To tacks packing trays in same direction will cause product damaged.
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 22 www.avnet-embedded.eu
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 23 www.avnet-embedded.eu
8. INSPECTION STANDARD 8.1. QUALITY : THE QUALITY OF GOODS SUPPLIED TO PURCHASER SHALL COME UP TO THE FOLLOWING STANDARD.
8.1.1. THE METHOD OF PRESERVING GOODS AFTER DELIVERY OF GOODS FROM U.R.T. TO PURCHASER. PURCHASER SHALL CONTROL THE LCM AT -10
℃ TO 40 ℃ ,AND IT MIGHT BE DESIRABLE TO KEEP AT THE NORMAL ROOM TEMPERATURE
AND HUMIDITY UNTIL INCOMING INSPECTION OR THROWING INTO PROCESS LINE.
8.1.2. INCOMING INSPECTION (A) THE METHOD OF INSPECTION IF PURCHASER MAKE AN
INCOMING INSPECTION ,
A SAMPLING
APPLIED ON THE CONDITION THAT QUALITY OF ONE
PLAN
SHALL BE
DELIVERY SHALL BE
REGARDED AS ONE LOT. (B) THE STANDARD OF QUALITY ISO-2859-1 ( or MIL-STD-105E ) , LEVEL
CLASS CRITICAL MAJOR MINOR TOTAL
Ⅱ SINGLE PLAN.
AQL(%) 0.4 % 0.65 % 1.5 % 1.5 %
EVERY ITEM SHALL BE INSPECTED ACCORDING TO THE CLASS. (C) MEASURE IF AS THE RESULT OF ABOVE RECEIVING INSPECTION , A LOT OUT IS DISCOVERED. PURCHASER SHALL BE INFORM SELLER OF IT WITHIN SEVEN DAYS. BUT FIRST SHIPMENT WITHIN FOURTEEN DAYS.
8.1.3. WARRANTY POLICY U.R.T. WILL PROVIDE ONE-YEAR WARRANTY FOR THE PRODUCTS ONLY IF UNDER SPECIFICATION OPERATING CONDITIONS. U.R.T. WILL REPLACE NEW PRODUCTS FOR THESE DEFECT PRODUCTS
WHICH UNDER WARRANTY PERIOD AND BELONG TO THE RESPONSIBILITY OF U.R.T.
8.2. CHECKING CONDITION 8.2.1. CHECKING DIRECTION SHALL BE IN THE 45 DEGREE AREA TO FACE THE SAMPLE. 8.2.2. CHECKER SHALL SEE OVER 30 cm. WITH BARE EYES FAR FROM SAMPLE AND USING 2 PCS. OF 20W FLUORESCENT LAMP.
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 24 www.avnet-embedded.eu
8.3. INSPECTION PLAN : CLASS
ITEM
JUDGEMENT
CLASS
1. OUTSIDE AND INSIDE PACKAGE
"MODEL NO." , "LOT NO." AND "QUANTITY"
Minor
PACKING & INDICATE
SHOULD INDICATE ON THE PACKAGE. 2. MODEL MIXED AND QUANTITY
OTHER MODEL MIXED................REJECTED
3. PRODUCT INDICATION
"MODEL NO." SHOULD INDICATE ON
4. DIMENSION,
ACCORDING TO SPECIFICATION OR
Critical
QUANTITY SHORT OR OVER......REJECTED
Major
THE PRODUCT
ASSEMBLY
LCD GLASS SCRATCH
DRAWING.
Major
AND SCRIBE DEFECT. 5. VIEWING AREA
POLARIZER EDGE OR LCD'S SEALING LINE
Minor
IS VISABLE IN THE VIEWING AREA
、BLACK SPOT、
6. BLEMISH
WHITE SPOT IN THE LCD
……..REJECTED
Minor
ACCORDING TO STANDARD OF VISUAL INSPECTION ( INSIDE VIEWING AREA )
AND LCD GLASS CRACKS
、BLACK SPOT
7. BLEMISH
APPEARANCE
WHITE SPOT
AND SCRATCH
Minor
ACCORDING TO STANDARD OF VISUAL INSPECTION ( INSIDE VIEWING AREA )
ON THE POLARIZER 8. BUBBLE IN POLARIZER
Minor
ACCORDING TO STANDARD OF VISUAL INSPECTION ( INSIDE VIEWING AREA )
9. LCD'S RAINBOW COLOR
STRONG DEVIATION COLOR ( OR NEWTON
Minor
RING) OF LCD......REJECTED. OR ACCORDING TO LIMITED SAMPLE ( IF NEEDED, AND INSIDE VIEWING AREA ) 10. ELECTRICAL AND OPTICAL CHARACTERISTICS
、VOP、
ACCORDING TO SPECIFICATION OR
Critical
DRAWING . ( INSIDE VIEWING AREA )
( CONTRAST
CHROMATICITY … ETC )
ELECTRICAL
11.MISSING LINE
、LINE、CHARACTER
MISSING DOT
、
12.SHORT CIRCUIT
WRONG PATTERN DISPLAY
Critical
....REJECTED
、WRONG PATTERN
NO DISPLAY
、CURRENT CONSUMPTION
Critical
DISPLAY
OUT OF SPECIFICATION...... REJECTED 13. DOT DEFECT (FOR COLOR AND TFT)
ACCORDING TO STANDARD OF VISUAL
Minor
INSPECTION
U.R.T.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 25 www.avnet-embedded.eu
8.4. STANDARD OF VISUAL INSPECTION NO. CLASS
JUDGEMENT
ITEM (A) ROUND TYPE:
unit : mm.
DIAMETER (mm.)
Φ Φ 0.25 < Φ 0.1 <
ACCEPTABLE Q'TY
≦ 0.1
DISREGARD
≦ 0.25
3 (D>5mm)
BLACK AND WHITE SPOT FOREIGN MATERIEL NOTE: Φ=(LENGTH+WIDTH)/2 8.4.1 MINOR DUST IN THE CELL (B) LINEAR TYPE: BLEMISH WIDTH LENGTH SCRATCH
0 unit : mm. ACCEPTABLE Q'TY
W
≦0.03
L ≦ 5.0 0.03 <
W
≦0.07
------
W
-----0.07 <
DISREGARD 3 (D>5mm) FOLLOW ROUND TYPE
unit : mm. DIAMETER Φ
≦0.2
DISREGARD
0.2 <
Φ
≦ 0.5
2 (D>5mm)
0.5 <
Φ
BUBBLE IN POLARIZER 8.4.2 MINOR
DENT ON POLARIZER
ACCEPTABLE Q'TY
Items Dot Defect
0
ACC. Q'TY
Bright dot
N≦ 4 (D>5mm)
Dark dot
N≦ 4 (D>5mm)
Pixel Define
8.4.3 MINOR
Not 1: The definition of dot: The size of a defective dot over 1/2 of whole dot is regarded as one defective dot. Not 2: Bright dot: Dots appear bright and unchanged in size in which LCD panel is displaying under black pattern. Not 3: Dark dot: Dots appear dark and unchanged in size in which LCD panel is displaying under pure red, green ,blue pattern.
U.R.T .
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Page: 26
www.avnet-embedded.eu
NO.
CLASS
ITEM
JUDGEMENT
8.4.4
MINOR
LCD GLASS CHIPPING
Y> S
8.4.5
MINOR
LCD GLASS CHIPPING
X or Y > S
8.4.6
MAJOR
LCD GLASS GLASS CRACK
Y > (1/2) T
Reject
Reject
Reject
1. 8.4.7
MAJOR
LCD GLASS SCRIBE DEFECT
a> L/3 , A>1.5mm. Reject
2. B : ACCORDING TO DIMENSION
MINOR
LCD GLASS CHIPPING ( ON THE TERMINAL AREA )
8.4.9
MINOR
LCD GLASS CHIPPING ( ON THE TERMINAL SURFACE )
8.4.10
MINOR
LCD GLASS CHIPPING
8.4.8
U.R.T.
Φ= (x+y)/2 > 3.0 mm Reject
Y > (1/3) T Reject
Y> T
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Reject
Page: 27 www.avnet-embedded.eu
8.5 INSPECTION STANDARD OF TOUCH PANEL NO.
CLASS
ITEMS
JUDGEMENT
8.5.1
MAJOR
Touch Panel Crack
Reject
X
Y
T
Corner
8.5.2
MINOR
X≦2mm, Y≦2mm, Z＜1/2T
Accept
X≦3mm, Y≦3mm, Z＜1/2T
Accept
Z
Touch Panel Chipping
X
Y
T
Edge Z
W≦0.05, L≦20mm 8.5.3
8.5.4
Scratch Dust and Foreign materiel (Linear Type)
MINOR
MINOR
Scratch Dust and Foreign materiel (Round Type：Φ=(Length+Width)/2)
0.05mm0.07mm
Φ＞0.35mm
8.5.5
Accept
W≦0.05mm, L≦5mm Distance between scratch＞5.0mm W＞0.05mm or L＞5mm ( W>0.05 Follow 8.5.4 Round type ) Can not be removed
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Accept 3 ea Max. Reject Accept 3 ea Max.
Reject
Reject
Page: 28 www.avnet-embedded.eu
NO.
CLASS
ITEMS Inerratic Newton ring (For Resistive Touch Panel)
JUDEGMENT
1.Dimension of Newton ring > 1/3 V.A. area.
Reject
2.Dimension of Newton ring < 1/3 V.A. area, not affect font effect and line distortion. Accept
8.5.9
MINOR
Atactic Newton ring (For Resistive Touch Panel)
1.Dimension of Newton ring > 1/2 V.A. area.
Reject
2.Dimension of Newton ring < 1/2 V.A. area, not affect font effect and line distortion. Accept
8.5.10 MINOR
U.R.T.
Touch Panel Film Bulge
Not affect the transmittance and clarity under lighting ambient.
Revision 6 ; UMSH-8253MD-5T Ver. 0 ; November-23-2012
Accept
Page: 29 www.avnet-embedded.eu
www.avnet-embedded.eu
Avnet Embedded OFFICES Denmark Avnet Embedded Avnet Nortec A/S Ellekær 9 2730 Herlev Phone: +45 3678 6250 Fax: +45 3678 6255 denmark@ avnet-embedded.eu Finland Avnet Embedded Avnet Nortec Oy Pihatörmä 1 B 02240 Espoo Phone: +358 20 749 9 260 Fax: +358 20 749 9 280 finland @ avnet-embedded.eu FrancE Avnet Embedded Avnet EMG France SA Parc Club du Moulin à Vent, Bât 10 33, rue du Dr Georges Lévy 69693 Vénissieux Cedex Phone: +33 4 78 77 13 92 Fax: +33 4 78 77 13 97 bron @ avnet-embedded.eu
GERMANY (AUSTRIA, CZECH REPUBLIC, HUNGARY, POLAND, SWITZERLAND) Avnet Embedded Avnet EMG GmbH Gruber Straße 60c 85586 Poing Phone: +49 8121 775 500 Fax: +49 8121 775 550 poing @ avnet-embedded.eu
UNITED KINGDOM (IRELAND) Avnet Embedded 5a Waltham Park White Waltham Maidenhead Berkshire, SL6 3TN Phone: +44 1628 518900 Fax: +44 1628 518901 uk@ avnet-embedded.eu
Avnet Embedded Avnet EMG GmbH Lötscher Weg 66 41334 Nettetal Phone: +49 8121 775 500 Fax: +49 8121 775 550 nettetal@ avnet-embedded.eu ITALY (PORTUGAL, SPAIN) Avnet Embedded Avnet EMG Italy SRL Via Manzoni, 44 20095 Cusano Milanino Phone: +39 02 660 92 1 Fax: +39 02 660 92 498 milano @ avnet-embedded.eu
Avnet Embedded Avnet EMG France SA 14 avenue Carnot 91349 Massy Cedex Phone: +33 1 64 47 29 29 Fax: +33 1 64 47 99 99 paris @ avnet-embedded.eu
NETHERLANDS (BELGIUM, LUXEMBOURG) Avnet Embedded Avnet B.V. Takkebijsters 2 4817 BL Breda Phone: +31 76 5722400 Fax: +31 76 5722404 benelux @ avnet-embedded.eu
Avnet Embedded Avnet EMG France SA Les Peupliers II 35 avenue des Peupliers 35510 Cesson-Sévigné Phone: + 33 2 99 77 37 02 Fax: + 33 2 99 77 37 01 rennes @ avnet-embedded.eu
SWEDEN (NORWAY) Avnet Embedded Avnet Nortec AB Esplanaden 3 D 172 67 Sundbyberg Phone: +46 8 564 725 50 Fax: +46 8 760 01 10 sweden @ avnet-embedded.eu
All trademarks and logos are the property of their respective owners. No guarentee as to the accuracy, completeness or reliability of any information. Subject to modifications and amendments.
03/2013
