Specifications Ada Description Operation

Transcript

There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • Metal Construction with chrome plated finish • Pressure balancing cycle valve design with an adjustable temperature limit stop • 1/2" CC connections • Includes non-metallic showerhead, arm, flange and non-metallic diverter tub spout OPERATION • Lever style Handle • Handle operates counterclockwise through a 270° arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 2° FLOW • Showerhead is limited to 2.5 gpm (9.5 L/min) CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified by CSA to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.1 WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 7" (178mm) ESC. DIAM. 2" CC (51mm) 1 7/8" IPS (48mm) MAX WALL Specifications ADA CHATEAU® POSI-TEMP® Single-Handle Tub/Shower Valve Model: L2353 Model: L2363 (with 1/4 Turn Stops) FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN IPS (16mm) FINISHED WALL LINE 3/16"(typ) (5mm) PLASTER GROUND 2 1/2" MAX. (63mm) 1-1/2" (38mm) 6'-6" (1981mm) NOMINAL 4-1/2" (114mm) CL DIRECTION OF HANDLE ROTATION 1 3/8" (35mm) SHOWER 45" (1143mm)/ 48" (1219mm) CL DIAMETER WALL OPENING 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. 1 3/8" (35mm) PLASTIC TUB/SHOWER SURROUND 32" (813mm) TUB/SHOWER AND TUB ONLY 4-1/2" (114mm) FLOOR LINE THICK WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 THIN WALL APPLICATION ADA symbol applies to shower valve control only. Rev. 12/03 Specifications DESCRIPTION • Chrome plated metal construction • Pressure balancing cycle valve design with an adjustable temperature limit stop • 1/2" CC connections • Includes non-metallic showerhead, arm, flange and non-metallic diverter tub spout OPERATION • Lever style Handle • Handle operates counterclockwise through a 270° arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 2° FLOW • Showerhead is limited to 2.5 gpm (9.5 L/min) CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified by CSA to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.1 WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 2"CC (51mm) 1 7/8" IPS (48mm) MAX WALL ADA CHATEAU® POSI-TEMP® Single-Handle Tub/Shower Valve Model: L2353 NOTE: See reverse side for illustrated parts FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm) FINISHED WALL LINE 3/16"(typ) (5mm) PLASTER GROUND 7" (178mm) ESC. DIAM. 2 1/2" MAX. (63mm) 4-1/2" (114mm) 1 1/2" MAX. (38mm) 6'-6" (1981mm) NOMINAL CL DIRECTION OF HANDLE ROTATION DIAMETER WALL OPENING 1 3/8" (35mm) SHOWER 45" (1143mm)/ 48" (1219mm) 2-3/4" C.C. (70mm) CL 1 3/8" (35mm) 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. PLASTIC TUB/SHOWER SURROUND 32" (813mm) TUB/SHOWER AND TUB ONLY FLOOR LINE FLOOR LINE THICK WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 THIN WALL APPLICATION ADA symbol applies to shower valve control only. Rev. 1/98