Preview only show first 10 pages with watermark. For full document please download

Specifications - Commscope.com

   EMBED


Share

Transcript

Product Specifications SBJAH4 SBJAH4--1D65B 1D65B--DL 12-port sector antenna, 2x 698–798, 2x 824-896 and 8x 1695–2360 MHz, 65° HPBW, 3x RET and low bands have diplexers l Interleaved dipole technology providing for attractive, low wind load mechanical package l Provides support for future Band 14 operations Electrical Specifications Frequency Band, MHz Gain, dBi Beamwidth, Horizontal, degrees Beamwidth, Vertical, degrees Beam Tilt, degrees USLS (First Lobe), dB Front-to-Back Ratio at 180°, dB Isolation, dB Isolation, Intersystem, dB VSWR | Return Loss, dB PIM, 3rd Order, 2 x 20 W, dBc Input Power per Port, maximum, watts Polarization Impedance 698–798 824–896 1695–1880 1850–1990 1920–2180 2300–2360 15.2 15.5 15.4 16.1 16.2 16.7 68 65 63 63 65 65 11.7 10.3 11.3 10.4 9.8 8.9 2–14 2–14 2–14 2–14 2–14 2–14 15 16 17 18 18 17 29 31 30 33 32 34 28 28 28 28 28 28 30 30 30 30 30 30 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 -153 350 ±45° 50 ohm -153 350 ±45° 50 ohm -153 350 ±45° 50 ohm -153 350 ±45° 50 ohm -153 350 ±45° 50 ohm -153 300 ±45° 50 ohm Electrical Specifications, BASTA* Frequency Band, MHz Gain by all Beam Tilts, average, dBi Gain by all Beam Tilts Tolerance, dB 698–798 14.9 ±0.4 2 ° | 14.9 Gain by Beam Tilt, average, dBi Beamwidth, Horizontal Tolerance, degrees Beamwidth, Vertical Tolerance, degrees USLS, beampeak to 20° above beampeak, dB Front-to-Back Total Power at 180° ± 30°, dB CPR at Boresight, dB CPR at Sector, dB 824–896 1695–1880 1850–1990 1920–2180 2300–2360 15.3 15.3 15.8 15.9 16.4 ±0.3 ±0.5 ±0.4 ±0.4 ±0.4 2 ° | 15.2 2 ° | 15.3 2 ° | 15.8 2 ° | 15.8 2 ° | 16.4 8 ° | 15.0 8 ° | 15.4 8 ° | 15.4 8 ° | 15.8 8 ° | 15.9 8 ° | 16.4 14 ° | 14.7 14 ° | 15.2 14 ° | 15.2 14 ° | 15.7 14 ° | 15.7 14 ° | 16.3 ±1.7 ±0.8 15 24 18 10 ±1.9 ±0.6 16 23 20 12 ±3.4 ±0.7 17 25 18 9 ±3 ±0.7 18 27 20 13 ±4 ±0.6 18 25 21 12 ±3.3 ±0.3 17 27 23 9 * CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs. Array Layout ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017 page 1 of 4 September 22, 2017 Product Specifications SBJAH4 SBJAH4--1D65B 1D65B--DL General Specifications Operating Frequency Band 1695 – 2360 MHz Antenna Type Sector Band Multiband Performance Note Outdoor usage | 698 – 798 MHz | 824 – 896 MHz Mechanical Specifications RF Connector Quantity, total 12 RF Connector Quantity, low band 4 RF Connector Quantity, high band 8 RF Connector Interface 4.3-10 Female Color Light gray ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017 page 2 of 4 September 22, 2017 Product Specifications SBJAH4 SBJAH4--1D65B 1D65B--DL Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket Radiator Material Aluminum Radome Material Fiberglass, UV resistant Reflector Material Aluminum RF Connector Location Bottom Wind Loading, frontal 746.0 N @ 150 km/h 167.7 lbf @ 150 km/h Wind Loading, lateral 243.0 N @ 150 km/h 54.6 lbf @ 150 km/h Wind Loading, rear 776.0 N @ 150 km/h 174.5 lbf @ 150 km/h Wind Speed, maximum 241 km/h | Low loss circuit board | 150 mph Dimensions Length 1828.0 mm Width 350.0 mm | Depth 208.0 mm | 8.2 in Net Weight, without mounting kit 26.5 kg | | 72.0 in 13.8 in 58.4 lb Remote Electrical Tilt (RET) Information Input Voltage 10–30 Vdc Internal RET High band (2) Power Consumption, idle state, maximum 2.0 W | Low band (1) Power Consumption, normal conditions, maximum 13.0 W Protocol 3GPP/AISG 2.0 (Multi-RET) RET Interface 8-pin DIN Female RET Interface, quantity 1 female | | 8-pin DIN Male 1 male Packed Dimensions Length 1975.0 mm Width 450.0 mm | 17.7 in Depth 355.0 mm | 14.0 in Shipping Weight 40.1 kg 88.4 lb | | 77.8 in Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system Included Products ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017 page 3 of 4 September 22, 2017 Product Specifications SBJAH4 SBJAH4--1D65B 1D65B--DL BSAMNT-3 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. * Footnotes Performance Note Severe environmental conditions may degrade optimum performance ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017 page 4 of 4 September 22, 2017