Transcript
Specifications — CVEQ1, CVEQ1 AAP, CVEQ1 WM
Video Gain ................................................ Equalization/peaking gain ......... Bandwidth ..................................... Differential phase error .............. Differential gain error .................
-6 dB to +6 dB, adjustable: 0.5 V to 2.0 V ±10% with input at 1 volt 4.5 dB max. @ 8 MHz 185 MHz (-3 dB) 1º at 3.58 MHz 0.07% at 3.58 MHz
Video input Number/signal type ................... Connectors ................................... Nominal level ............................... Minimum/maximum levels ....... Impedance .................................... Return loss ....................................
1 composite video 1 female BNC 1 Vp-p Analog: 0.3 V to 2.0 Vp-p with no offset at unity gain 75 ohms <-30 dB @ 5 MHz
Video output Number/signal type ................... Connectors ................................... Nominal level ............................... Minimum/maximum levels ....... Impedance .................................... Return loss .................................... DC offset .......................................
1 equalized composite video 1 female BNC 1 Vp-p at unity gain 0.3 V to 2.0 Vp-p 75 ohms <-30 dB @ 5 MHz ±50 mV with input at 0 offset
Sync Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio Gain ................................................ Frequency response .................... THD + Noise ................................. S/N ................................................ Stereo channel separation ..........
Unbalanced output: 0 dB; balanced output: +6 dB 20 Hz to 20 kHz, ±0.5 dB 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level >86 dB at output 6 dB, balanced >75 dB @ 20 Hz to 20 kHz
Audio input Number/signal type ................... Connectors ................................... Impedance .................................... Nominal level ............................... Maximum level ............................
1 stereo unbalanced 2 RCA female >10k ohms unbalanced, DC coupled -10 dBV (316mV) +6 dBV, (balanced) at 1% THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV
2 dBu
Audio output Number/signal type ................... Connectors CVEQ1 ............................... CVEQ1 AAP ..................... Impedance .................................... Nominal level ............................... Maximum level (Hi-Z) ................ Maximum level (600 ohm) .........
1-2
1 stereo, balanced/unbalanced (1) 3.5 mm captive screw connector, 5 pole (1) 3.5 mm direct insertion captive screw connector, 5 pole 50 ohms unbalanced, 100 ohms balanced -2 dBu (632 mV), balanced output >+16 dBu, balanced at 1% THD+N >+9 dBm, balanced at 1% THD+N
CVEQ1, CVEQ1 AAP, CVEQ1 WM Line Drivers • Specifications
General External power supply ................ 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A (max.), regulated Power input requirements ......... 12 VDC, 0.4 A Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing Rack mount .................................. No Enclosure type .............................. Metal Enclosure dimensions CVEQ1 ............................... 1.2" H x 3.5" W x 1.8" D 3.0 cm H x 8.9 cm W x 4.6 cm D (Depth excludes connectors.) CVEQ1 AAP Plate ........................... 1.4" H x 3.5" W x 0.1" D ( 2.8 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate) Circuit board ............ 1.1" H x 2.7" W x 1.7" D (2.8 cm H x 6.9 cm W x 4.3 cm D) (Height includes connectors, but not cables.) CVEQ1 WM Plate ........................... 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) Circuit board ............ 2.7" H x 1.1" W x 1.7" D (6.9 cm H x 2.8 cm W x 4.3 cm D) (Width includes connectors, but not cables.) Product weight CVEQ1, CVEQ1 AAP ...... 0.2 lbs (0.1 kg) CVEQ1 WM ...................... 0.3 lbs (0.1 kg) Shipping weight CVEQ1, CVEQ1 AAP ...... 2 lbs (1 kg) CVEQ1 WM ...................... 3 lbs (2 kg) Vibration ....................................... ISTA 1A in carton (International Safe Transit Association) Listings .......................................... UL, CUL Compliances ................................. CE, FCC Class A Warranty ....................................... 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.
(7.51-090605-D6-111612)
CVEQ1, CVEQ1 AAP, CVEQ1 WM Line Drivers • Specifications
1-3
