Transcript
SE60 6 1⁄2-inch (165mm) Component Speakers Crossover Dimensions
Specifications:
SE60
Nominal Size RMS Power Handling Peak Power Handling Frequency Response (±3dB) Impedance Sensitivity (1 Watt / 1 Meter)
6 1⁄2" (165mm) 55w 150w 58-20kHz 4Ω 92dB
# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 not shown not shown not shown
Description Type S3 3⁄4” Tweeter SE60 Crossover SE60 Woofer SE60 Woofer Grille Flush-Angle Tweeter Mount Surface-Angle Tweeter Mount Flush Tweeter Mount Phillips Head Screw Woofer Spring Clip Terminated Woofer Wire Terminated Tweeter Wire Flush-Angle Clip - Short Flush-Angle Clip - Long Flush Mount Clip (With White Dot) M4x10mm (3⁄8") M3x12mm (1⁄2") M4x20mm (3⁄4") #6 x 3⁄8" Silver Socket Head Screw Woofer Gasket 16/18AWG. Connector Barrel Hex Key
Quantity 2 2 2 2 2 2 2 8 8 2 2 2 2 4 2 2 8 4 2 8 1
6 11/16" 169 mm
2‘’ 50mm
2‘’ 50mm 2‘’ 50mm
1 3/4" 43 mm
2 1/4‘’ 57mm 2 1/4‘’ 1 7/8‘’ 57mm 47mm
1 7/16" 36 mm
2‘’ 50mm
2 1/4‘’ 57mm 2 1/4‘’ 57mm
2‘’ 50mm
1‘’ 25mm 1 7/8‘’ 1‘’ 47mm 7/16‘’ \ 10mm* 25mm1 7/ ‘’
1 3/4‘’ 44mm 1 3/4‘’ 44mm
2‘’ 50mm
1 3/4‘’ 44mm 1 3/4‘’ 44mm
2 1/4‘’ 57mm
2 1/4‘’ 57mm
1 7/8‘’
1‘’ 25mm 1‘’ 25mm 7/16‘’ \ 10mm* 9/16‘’ \ 15mm** 1 7/8‘’ 7/16‘’ \ 10mm* 9 47mm 1 1/2‘’ /16‘’ \ 15mm** 1 7/8‘’ 38mm 1 1/2‘’ 47mm * Depth Without 38mm
2‘’ 50mm
1 3/4‘’ 44mm 2 1/4‘’ 57mm
7/16‘’
1‘’ 25mm 7/16‘’
\ 10mm*
1 7/8‘’ 47mm
1 7/8‘’ 47mm 01960 U.S.A. bostonacoustics.com Boston Acoustics, Inc. 300 Jubilee Drive Peabody, Massachusetts
\ 10mm* 1 7/8‘’ 47mm 1 1/2‘’ 38mm
9/16‘’
\ 15mm**
38mm 1 1/2‘’ 39mm
SE60 1 7/8‘’ 47mm
1‘’ 25mm 7/16‘’
\ 10mm*
9/16‘’
1 1/2‘’ 38mm
1‘’ 25mm
91/1 16 /2‘’‘’\ 15mm**
© 2011 All rights reserved. Boston, Boston Acoustics, and the B/A ellipse symbol are registered trademarks of Boston Acoustics, Inc. Specifications are subject to change without notice. 142-003912-0
1 3/4‘’ 44mm
9/16‘’ \ 15mm**
1‘’ 25m 1
39mm
Flush Tweeter Mount Dimensions 5 5/8” 142mm
1 1/2‘’ 38mm 1 1/2‘’ 38mm
1 /2‘’ Spring Clip 39mm 1 1/2‘’ ** Depth With Spring Clip
47mm 1 7/8‘’ 47mm
2 1/2” 63mm
9/16‘’ \ 15mm*
8
47mm 7/16‘’ \ 10mm*
Flush-Angle Tweeter Mount Dimensions
1‘’ 25mm
7/16‘’
Surface-Angle Tweeter Mount Dimensions
Woofer Dimensions
1 3/4‘’ 44mm
1‘ 25
1 3/4‘’ 44mm
1 7/8‘’ 47mm 1 7/8‘’ 47mm
2‘’ 50mm
2 5
1‘’ 25mm
\ 15mm**
1 1/2‘’ 39mm
1 1/2‘’ 39mm
1‘’ 25mm
SE60 6 1⁄2-inch (165mm) Component Speakers Surface-Angle Mount
Flush-Angle Mount
Flush Mount
1
1
1
2
17
5
16
Tweeter Level Adjustment
15
12
14
13
6
15
14
5
System Wiring
7
Grille Installation
SE60 Woofer Wiring
4
8
4
3
– Negative 9
+ Positive 10
Connecting Crossover Cases
A
B
Remove Covers
C
Connect Crossovers
18 2
2
SE60
Secure Crossovers
17
D
Wire Connections
E
Re-Install Covers
