Transcript
Specifications Sheet
JMA Minimally Invasive Grounding
MIG-12-XX
y inar
im l e r P
MIG-12-XX
The MIG-12-XX provides superior grounding of coaxial transmission lines along with being the most minimally invasive kit on the market.
*
The MIG removes significantly less outer jacket then the market competition, keeping cable integrity intact.
Included in US Kit
Dimensions
Specification
Nominal Size
1/2" Annular
Ground Cable Length
18in, 36in, 60in, .5m, 1.0m, 1.5m
Environmental
Specification
Comment
Moisture Resistance
No Ingress
ANSI/ SCTE 60, IP-67, IP-68, IEC 60529
Electrical
Specification
Strike Capability
100kA 10 microsecond charge and 350 microsecond discharge, or 10/350µs | MIL-STD-1757A
Corrosion Resistance
1000hrs
ASTM B117
General
Specification
Ultra Violet Resistance
1000hrs
Cable Supported
Andrew LDF4, LDF4RK, LDF4 RN; RFS LCF12; NK Draka RFA1200; Eupen EC4, Leoni Flexline 1/2"R; Hansen RF5012, RF5012Z; Rosenberger SL 1/2" R; LS LHF 12D
ASTM-G-155-98, Table X3.1 cycle 1, 102-18
Lug Configuration
US Kit: dual hole lug (1) 3/8" screw hole and (1) 3/8" screw slot International Kit: single hole lug (1) 10mm
Install Storage/ Operation Storage Temperature Operation
–40°C to 85°C / –40°F to 185°F
Ground Cable Material
Bare copper with black, UV stable, PVC jacket (16mm2)
Ground Cable Size
6AWG, 7 strands MIL-STD-188-124A
Grounding Wire Material
Soft tinned ETP copper
US Kits
International Kits
MIG-12-18 MIG-12-36 MIG-12-60
MIG-12-0.5M MIG-12-1.0M MIG-12-1.5M
–55°C to 85°C / –67°F to 185°F –55°C to 85°C / –67°F to 185°F
Lug Attachment Method
* US Kit: All dual hole lug hadware included
International Kit: Lug installed and crimped
Kit Contents
Jacket cutting tool, ground wire assembly, respective hardware, 1-piece MIG assembly
Overall Weight (MIG-12/12S-05M) TBD
Tools Ground Wire Install Tool
SP-MIG-S (sold separately)
7645 Henry Clay Blvd. Liverpool, NY 13088
Support Tel: +1 315-431-7100 Inside US: 1-888-201-6073
[email protected] | www.JMAwireless.com
