Transcript
SPEED-AMP EDFA Optical EDFA amplifier
WAVELENGTH DIVISION MULTIPLEXING
1
Optical EDFA Amplifier for Long-Haul Applications – DWDM and 40/100Gbps Signals above 1,000 km » » » » » »
Optical amplifier: Booster, in-line amplifier, pre-amplifier Distances: Above 1,000 km without signal regeneration Protocol transparent (10 Mbps to 100 Gbps) Laser safety class 1 M Customized amplifying design available on request Optional: Remote management via OSC channel
Inhouse development
SPEED-BOOSTER for 10 Gbps Point-to-Point Connections up to 170 km Location B
Location A
1 GbE Switch
1 GbE Switch Without any location in between
1 GbE Switch
Up to 40 x
1 GbE Switch
Up to 40 x
One pair of fiber
SPEED-DWDM
SPEED-BOOSTER
SPEED-BOOSTER
SPEED-DWDM
1 GbE Switch
1 GbE Switch
Up to 170 km 1 GbE Switch
1 GbE Switch
Distances of optical transmission systems can be increased by using optical amplifiers. Three different amplifier types (booster, in-line amplifier and pre-amplifier) can be used depending on the required distance and existing locations. All SPEED-amplifiers are capable to transfer up to 96 DWDM wavelengths via a sing-
le pair of fiber. Each wavelength supports miscellaneous protocols like SDH, ATM and Ethernet providing and bandwidths (10 Mbps to 100 Gbps). The amplifiers can be monitored and configured locally via CLI (Telnet) or through SNMP and Web GUI by using the optionally available management module. Even a remote management can
be enabled by an in-band OSC channel. All optical SPEED-amplifiers meet laser safety class 1M. The modules are installed in space-saving housing types (SPEEDCARRIER 5U and SPEED-CARRIER 1U/B). Up to 170 km can be accomplished in a point-to-point connection by using a booster at the beginning of the line.
Pre-Amplifier achieving up to 200 km without any Inline Location Location A
Location B
1 GbE switch
1 GbE switch Without inline location 1 GbE switch
1 GbE switch
Up to 40 x
SPEED-DWDM
SPEED-PREAMP and SPEED-BOOSTER
1 GbE switch
By the additional use of a pre-amplifier at the end of a transmission link the achievable
76
Up to 40 x
One pair of fiber
SPEED-PREAMP and SPEED-BOOSTER Up to 200 km
distance of the entire system can be increased up to 250 km (e.g. with 1 Gbps signals).
+49 (0) 6103 / 83 4 83-333 ·
[email protected] · © 2016 Pan Dacom Direkt GmbH
SPEED-DWDM
1 GbE switch
1 GbE switch
1 GbE switch
Up to 400 km without Signal Regeneration using one Single In-Line Amplifier even for 100 Gbps Location B
Location Z One inline location
1 GbE switch
1 GbE switch
1 GbE switch
Up to 40 x
Up to 40 x
1 GbE switch
SPEED-DWDM
SPEED-INLINER
SPEED-PREAMP and SPEED-BOOSTER
SPEED-PREAMP and SPEED-BOOSTER
SPEED-DWDM
1 GbE switch
Up to 400 km
1 GbE switch
If the availability exists to install one or more inline amplifiers at a repeater site, the DWDM signal can be powered with additional 23 dBm optical budget. Using one repeater site, a distance of up to
1 GbE switch
1 GbE switch
point-to-point connection. For this purpose multiple repeater sites and a Forward-ErrorCorrection (FEC) integrated in the used optics are required.
400 km can be realized whereas this can be further extended if more repeater sites are used. All three types of amplifiers are already designed to support 100 Gbps bandwidth for realizing up to 1,000 km in a
100 Gbps over 1,000 km using Booster, Pre-Amplifier and Multiple In-Line Amplifier n x Location Z More than 1,000 km with multiple inline locations
Location A
Location B
10 GbE switch
10 GbE switch
10 GbE switch
Up to 10 x
Up to 10 x
10 GbE switch
SPEED-DWDM
SPEED-INLINER
SPEED-PREAMP and SPEED-BOOSTER
SPEED-PREAMP and SPEED-BOOSTER
10 GbE switch
SPEED-DWDM
10 GbE switch
More than 1,000 km possible
10 GbE switch
WAVELENGTH DIVISION MULTIPLEXING
Location A
1
10 GbE switch
SPEED Amplifier Options Ordering number
Product name
Type
Output power
Input sensitivity
Number of slot
Ethernet Port RJ-45
Ethernet Port SFP
OSC
-25 dBm
1
2
1
Integrated
S-OBA-17-A
SPEED-AMP EDFA BI
Booster and Inliner
17 dBm
S-OBA-23-A
SPEED-AMP EDFA BI
Booster and Inliner
23 dBm
-25 dBm
2
2
1
Integrated
S-OPA-14-A
SPEED-AMP EDFA PRE
PreAmp
14 dBm
-36 dBm
1
2
1
Not integrated
Specifications General • LED indicators: Unit status, optical link, OSC status, Ethernet link • Inliner/Booster (H x W x D): 56 x 131 x 170 mm • PreAmp (H x W x D): 28 x 131 x 170 mm • Power supply via backplane • Inliner: 15 W • PreAmp: 12 W • Laser safety class 1M Optical interfaces • Booster / in-line amplifier: 2 x LC duplex connector • Pre-amplifier: 1 x LC duplex connector
Management • Telnet, CLI • SNMP and Web GUI by using a management module (SPEED-NMS OE) • Remote management provided by OSC channel (1510 nm) Housing types • 4-slot SPEED-CARRIER 1U (B) • 16-slot SPEED-CARRIER 5U
Ordering options • S-OBA-17/OSC-A: SPEED-BOOSTER, 17 dBm output power and -25 dBm input sensitivity, OSC • S-OBA-23/OSC-A: SPEED-BOOSTER, 23 dBm output power and -25 dBm input sensitivity, OSC • S-OPA-14-A: SPEED-PREAMP, 14 dBm output power and -36 dBm input sensitivity
Ethernet interfaces • 2 x 10/100BaseT (RJ-45) • 1 x 100BaseFX (SFP) • Auto-MDI/MDI-x
+49 (0) 6103 / 83 4 83-333 ·
[email protected] · © 2016 Pan Dacom Direkt GmbH
77
