Transcript
SPEED-SINGLELINE SFP
WAVELENGTH DIVISION MULTIPLEXING
1.25 Gbps SFP transponder
Compact and cost-effective optical transponder module for applications up to 1.25 Gbps Protocol transparent (100 Mbps to 1.25 Gbps) Ideal for IP, SDH, video and storage applications An extremely flexible and cost-optimized C/DWDM service module (SFP-based) or basic media converter
Distances: Up to 40 km without signal regeneration Extremely compact design: only 1-slot in the 19" SPEED-CARRIER platform
SPEED-SINGLELINE – an active transponder module for xWDM networks The SPEED-SINGLELINE SFP is a multifunctional and compact 2-port SFP module for the universal use in telecommunication networks. The main field of application is cost-optimized CWDM and IP network
Storage
can be managed locally via Telnet (SNMP) or CLI interface and through SNMP or web by using the optionally available management module.
One pair of fiber 1310 nm
SDH network
DWDM networks where the SPEED-SINGLELINE SFP, as an intelligent transponder module, converts a transparent data channel to a corresponding CWDM/DWDM wavelength. The module
One pair of fiber Location A
1310 nm
Location B
One pair of fiber
One pair of fiber 1310 nm
1310 nm
SPEED-CARRIER 5U with SPEED-SINGLELINE SFP
CWDM Up to 40 km without amplifier
ADM
1310 nm
Singlemode / One pair of fiber
One pair of fiber
GbE switch
SDH STM-4 ADM
One pair of fiber
SPEED-CARRIER 5U with SPEED-SINGLELINE SFP
1310 nm Storage
Video
One pair of fiber
One pair of fiber
850 nm
850 nm
Video camera
Media / interface converter in a standalone housing The SPEED-SINGLELINE SFP can be used as a protocol transparent electrical-to-optical
GbE switch
interface converter in e.g. SDH (STM-1), IP (Fast Ethernet, Gigabit Ethernet) or Storage (ESCON,
Copper line
One pair of fiber
1000BaseTX
Singlemode
FICON, Fibre Channel) networks.
One pair of fiber 850 nm Multimode
SPEED-SINGLELINE SFP
SPEED-SINGLELINE SFP
GbE switch
One application transmitted via a single pair of fiber without external xWDM multiplexer This module is ideally suited for implementation in purely optical network infrastructures to convert among various fiber types (Multimode/
Singlemode) and wavelengths (e.g. 1310 nm to 1530 nm) while any protocol (e.g. IP, SDH, video or storage) starting from 100 Mbps up to
Copper line
single fiber, 40 km
1000BaseTX
Singlemode
GbE switch
SPEED-SINGLELINE SFP
Bidi-SFPs
1.25 Gbps is supported. In addition a single fiber transmission can be accomplished by using bidirectional transceiver. One pair of fiber 1310 nm 1000BaseSX
SPEED-SINGLELINE SFP
Specifications General • LED indicators: Unit status, optical link, local loops • Dimensions (H x W x D): 21 x 131 x 190mm • Power supply via backplane SFP ports • 2 SFP slots (1 x line, 1 x client) • Protocol: Transparent or SFP-specific • Data rate: 100 Mbps to 1.25 Gbps depending on the SFP type • Link-Loss-Carry-Forward (LLCF): Shut-down of client SFP if loss of signal occurs at the line SFP
72
SFP types • Use of SFPs according to MSA standard • Copper / electrical interfaces: • IP: Fast Ethernet, Gigabit Ethernet (RJ-45) • SDH: STM-1 (BNC) • Optical (LC): • IP: Fast Ethernet, Gigabit Ethernet • SDH: STM-1, STM-4 • Storage: 1 GFC, FICON, ESCON Management • Telnet, CLI • SNMP via SPEED-NMS OE • Web • Loops on SFP ports • SFP management information provided by integrated DMI
Housing types • 1-slot stand-alone housing • 4 slot SPEED-CARRIER 1U • 16 slot SPEED-CARRIER 5U Ordering option • SSL-SFP-SFP-A
SPEED-SINGLELINE SFP
+49 (0) 6103 / 83 4 83 - 333
[email protected] www.pandacomdirekt.de
©2012 Pan Dacom Direkt GmbH
GbE switch
