Transcript
Philips Consumer Lifestyle
SPF1207_10 Firmware Upgrade We have developed a firmware upgrade to improve your product. Related models: SPF1207/10
Benefits of this upgrade: 1. Change default date as 01-January-2010 2. Decrease of current consumption Note:
Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware
upgrade!
How do I check the current firmware version? Step1: Check your current version First check your current firmware version to see if you need to upgrade: 1.
Turn on the set.
2.
On {Home Page} select item and Press “OK” to confirm.
3.
On {Settings Page} select item.
4.
If your existing firmware version is earlier than this version V1.03 or V1.01A (such as V1.00, V1.01…), you need upgrade your firmware as following steps.
Settings Language Brightness Set Time Set Date Set Off-Time Set On-Time Slideshow Interval Transition Effect Info Default Settings
PhotoFrame SPF1207 Software version: 1.03 Type: Internal memory SD/MMC Card 98MB, 1872MB Used: 2MB, 18MB Free space: 96MB, 1854MB
Configuration code
Page 1 of 3
Philips Consumer Lifestyle Configuration VS lasted firmware version list: Model
Panel Match
Lasted Firmware Version
SPF1207/10
CPT Panel
V1.03
SPF1207/10
Hanstar Panel
V1.01A
How do I upgrade the firmware? Step2: Download firmware upgrade Download compressed packet of upgrade file from Philips Website and decompress it. Step3: Transferring firmware on to SD card Copy the upgrade file (SPF1207.bin & SPF1207A.bin) to the root directory of a formatted SD Card. Step4: Upgrading the firmware of your PhotoFrame 1.
Insert SD card into your PhotoFrame and re-power on.
2.
PhotoFrame will detected the upgrade file and display the below prompt screen.
A free update is available! Update now? Yes no
3.
Select “Yes” (default focus on “No”) and press “OK” to perform the upgrade actions..
4.
PhotoFrame will display the below screen which indicates upgrade is in progress. Note: Please be careful not to remove the power until the process is completed.
Updating…
Please DO NOT remove power!
Page 2 of 3
Philips Consumer Lifestyle 5.
After about 30 seconds, upgrade will completed and PhotoFrame will auto-reboot. Note: Don’t forget delete the upgrade files.
Step5: Confirm successful upgrade 1.
After the PhotoFrame automatically restart, on {Home Page} select item and Press “OK” to confirm.
2.
On {Settings Page} select item. For example, after CPT panel match sample successful upgrade, you can see as following info. ps. Hanstar Panel software version: 1.01A
Settings Language Brightness Set Time Set Date Set Off-Time Set On-Time Slideshow Interval Transition Effect Info Default Settings
3.
PhotoFrame SPF1207 Software version: 1.03 Type: Internal memory SD/MMC Card 98MB, 1872MB Used: 2MB, 18MB Free space: 96MB, 1854MB
Lasted Software Version:1.03
If you do not see the latest firmware is being upgraded, repeat Step4 and Step5
Firmware Upgrade History V1.03 1. Change default date as 01-January-2010 2. Decrease of current consumption
Page 3 of 3
