Transcript
Spider and Spider II
Remote controlled rotary mulching mower specifically designed for
This negates stress to hip, knee and ankle
mowing slopes up to 40°. With 4 wheel drive and 4 wheel steer it can
joints and eliminates the danger of roll
mow in any direction. The Spider has been primarily designed for the
over accidents associated with ride-on
maintenance of slopes, uneven terrain and unsafe areas. The operator
mowers. The larger Spider II can tackle
is not subjected to vibration as there is no physical contact with the machine and no exposure to the constant noise levels inherent with a pedestrian or ride-on machine.
slopes up to 55°, winch-assisted. Increased productivity is derived from four blades providing a 1.23 metre cutting width and improved quality of cut.
Ergonomic remote control unit gives the operator total control of the Spider
Horsepower: Cutting Width: Drive System: Special Features:
Ransomes Jacobsen Ltd. West Road, Ransomes Europark, Ipswich IP3 9TT Tel: 01473 270000 Fax: 01473 276300 www.ransomesjacobsen.com
Spider 1: 17, Spider II: 23 1.23 metres 4 wd drive, 4 wheel steer Remote mowing of slopes
R/Spid/000001
Spider and Spider II Technical Data Spider
Spider II
ILD01
ILD02
Power Engine: Kawasaki FH 500V air-cooled, 4 stroke, two cylinder, petrol Displacement: 494 cc Power: 12.7 kW (17 hp) @ 3600 rpm Torque: 37 N.m @ 2400 rpm Ignition: Electronic Starter: Electric 12 V Fuel Tank Capacity: 11 l (2.4 Imp gal) Transmission Mowing Clutch: Electromagnetic with friction clutch and brake
Power Engine: Kawasaki FH 680V air-cooled, 4 stroke, two cylinder, petrol Displacement: 624 cc Power: 17.25 kW (23 hp) @ 3100 rpm Torque: 37 N.m @ 2400 rpm Ignition: Electronic Starter: Electric 12 V Fuel Tank Capacity: 16 l (3.6 gal) Transmission Mowing Clutch: Electromagnetic with friction clutch and brake
Hydraulic Drive:
Hydraulic Drive:
Hydraulic pump Hydro Gear, hydraulic motor Sauer Danfoss
Hydro Gear BDP 21L , Sauer Danfoss OMP 40
Propelled Wheels: 4 wheel drive Travel Wheel: 4” x 8” with arrow (V) tread pattern Speed (Maximum): Driving Speed: 0 to 8 km/h (0 to 5 mph) Low: 0 to 3 km/h (0 to 1.9 mph) High: 0 to 7 km/h (0 to 4.4 mph)
Propelled Wheels: 4 wheel drive Travel Wheel: 16” x 6.5” with arrow (V) tread pattern Speed (Maximum): Driving Speed: 0 to 8 km/h (0 to 5 mph) Low: 0 to 3 km/h (0 to 1.9 mph) High: 0 to 7 km/h (0 to 4.4 mph)
Instruments Power indicator, signal reception, neutral, battery charge, blade
Instruments Power indicator, signal reception, neutral, battery charge, blade
Controls
Emergency stop button, driving speed controller, engine Controls stop switch, starter switch, mowing blade ON/OFF switch, mowing blade height adjustment control, joystick for driving forward and backward, joystick for driving left and right, remote control ON/OFF switch, system activation button, operator warning horn
Dimensions Length: 1300 mm (51.2”) Width: 1300 mm (51.2”) Height: 850 mm (33.5”) Weight: 245 kg (540.1 lb) Cutting Mowing Mechanism: Single blade with a fixed blade attached by the flange in the middle Width of Cut 0.8 m (31.5”) Height of Cut 60 to 110 mm (2.4” to 4.3”) Operator Operator Ear Noise Level: 85 dB (A) Leq Optional Equipment
Indespension box trailer c/w loading bar, drop legs, jockey wheel & straps, IFOR Williams box trailer c/w loading bar, drop legs, jockey wheel, spare wheel & straps, ‘Site Safe’ bunded fuel store 30 l lockable, service stand, low height of cut kit, Hydrostatic Winch (NBB System Machines Only)
Emergency stop button, driving speed controller, engine stop switch, engine starter switch, mowing blades ON/OFF switch, height of cut adjustment, joystick for driving forward and backward, joystick for driving left and right, skid steering switch, frequecy check/change button, engine speed controller
Dimensions Length: 1640 mm (64.6”) Width: 1430 mm (56.3”) Height: 920 mm (36.2”) Weight: 325 kg (716.5 lb) Cutting Mowing Mechanism: Four-blade fixed blades Width of Cut 1.23 m (48.4”) Height of Cut 50 to 100 mm (2” to 4”) Operator Operator Ear Noise Level: 83 dB (A) Leq
Optional Hydrostatic Winch (NBB System Machines Only) Equipment
4 wheel drive and 4 wheel steer provides increased traction and manoeuvrability to mow in any direction Spider I
Driving Environmental Performance ©2012 Ransomes Jacobsen, A Textron Company/Textron Innovations Inc. All rights reserved. NOTE: Specifications, while correct at time of printing, may change without notice.
