Transcript
Splitter-Transmitter Module Encoder Signal Broadcaster Features • • • • •
DIN Rail or Flange Mountable Up to 5 Way Splitter Level Changes to 5V, 12V or Vcc Tristatable Outputs Power On and Signal LEDs
Introducing the SPTX splitter-transmitter! DIN-rail or flange mountable, the module can be configured as a repeater, splitter, level changer, signal conditioner or encoder tester and will accept PP, HV or OC inputs at 5-24V via screw terminal connections. Up to four separate outputs can be delivered through 9pin D-type connectors on the front panel, with an additional 5V output capability via screw terminals (for daisy-chaining with subsequent units). Each D-type output can also be tristated by pulling its respective control line to +5V. A bank of LEDs on the case provides indication for power and signals.
Specifications Input Voltage ..........................6V to 26V Max Current Consumption .............300 mA Typical Repeater Output Voltage ........5V, 12V or Vcc Frequency Response .............Up to 800 Khz Weight ....................................400g Enclosure................................PC-GF, RAL 7035, IP20 Terminal ..................................9 Pin D Plug and Screw
SPTX Ordering Guide
Red type indicates price adder options. Not all configuration combinations may be available. Contact Customer Service for details.
Function SPTX
4 VERSION 4 = Four Output Splitter 5 = Five Output Splitter 9 = Special build (SPECW) Note 3
Electrical Configuration V3 INPUT VOLTAGE V3 6-24 Vcc
Note 4
5H
5V AUX POWER 5V 12V 24V
5H
12P
24H
5P
5H
OP1
OP2
OP3
OP4
OP5
Note 1 Note 2 5H 5N 5P 12H 12N 12P 24H 24N 24P
INPUT SIGNAL 5V Differential Driver 5V NPN Open-Collector 5V Push-Pull S/Ended 12V Differential Driver 12V NPN Open-Collector 12V Push-Pull S/Ended 24V Differential Driver 24V NPN Open-Collector 24V Push-Pull S/Ended
5H 5P 12H 12P 24H 24P
OUTPUT SIGNAL 5V Differential Driver 5V Push-Pull S/Ended 12V Differential Driver 12V Push-Pull S/Ended 24V Differential Driver 24V Push-Pull S/Ended
NOTES: 1 12V Minimum Input Voltage required. 2 Precisely 24V Input Voltage required. 3 Contact technical sales for selection and assistance. 4 26V Maximum. 5 Aux power and output signal voltages are limited to the input voltage supplied.
PRINCIPLE ENGINEERING LTD, TAN LLAN FARM, FFORD LLANFYNYDD, TREUDDYN, FLINTSHIRE, CH7 4LQ EMAIL:
[email protected] - WEB: WWW.PRINCIPLE-ENG.CO.UK - TEL/FAX : 0845 539 0068 Rev A