Spray Tips, Systems And Accessories

Transcript

® High performance products ® Airless and Air Assisted Airless Spray Tips, Systems and Accessories Thermoplastic Hoses, High and Low pressure Priceless Product Book Top Quality - Best Results Contact us by email: by phone: by fax: [email protected] 01202 478334 01202 488110 Find us on the web at www.exitflex.co.uk Check-out Tri-A.com website Dealer Nett Price List - Index LOW PRESSURE AIR & FLUID HOSE - BULK 4 AIR FED BREATHING APPARATUS 42 - 43 LOW PRESSURE TUBING 5 EXTENSION LANCES - CONVENTIONAL, 44 - 45 AIR SPRAY GUNS AND CONNECTIONS LOW PRESSURE AIR & FLUID HOSE ASSEMBLIES 6-7 GENERAL CONSUMABLES 46 - 47 TWIN TIPS 48 - 49 AIRLESS SPRAY TIPS, ACCESSORIES AND 50 - 57 AND TURBINE HOSES HOSE SLEEVING 7 + 17 LOW PRESSURE HOSE CONNECTIONS 8 TIP CHART AIR CONTROLS 9 DRAIN CLEANING NOZZLES 50 AIR ASSISTED AIRLESS SPRAY TIPS/SEALS & 52 TEXTILE BRADED HYDRAULIC HOSE R7, R8 10 - 11 AIR CAPS HIGH PRESSURE HOSES - BULK HIGH PRESSURE. HOSE ASSEMBLIES 12 - 15 REVERSIBLE AIRLESS TIP SYSTEMS 53 - 57 AIRLESS EXTENSION LANCES, POLEGUNS 58 - 59 16 - 17 HIGH PRESSURE REUSEABLE HOSE FITTINGS 18 AND EXTRUSION GUNS HIGH PRESSURE SWIVELS ‘Z’ SWIVELS, UNIONS 19 AIRLESS SPRAY GUNS - MANUAL & AUTOMATIC 60 - 63 AIR ASSISTED AIRLESS SPRAY GUNS 64 - 66 AND FERRULES HIGH PRESSURE HOSE SWAGE INSERTS 20 - 21 TRI-A REVERSIBLE AAA SYSTEM COUPLINGS & ADAPTORS FILTER HOUSINGS & SCREENS, BOOTH FILTERS FLUID CONTROL ACCESSORIES AND Y BLOCKS 67 22 - 24 SUCTION SYSTEMS, ASSEMBLIES & WANDS 68 - 72 COLOUR CHANGE SYSTEM 73 - 76 REFERENCE CHARTS 77 - 79 25 - 29 30 - 33 34 - 35 AGITATORS 36 MIX TANKS 37 PRESSURE FEED EQUIPMENT 38 - 39 PRE-TREATMENT NOZZLES 40 - 41 Distibuted by Low Pressure Hoses in Bulk This section covers Air, Powder and Fluid hoses principally for conventional spray, electrostatic powder, air tools, or low pressure transfer IMPORTANT NOTE: Hoses listed here are non conductive unless otherwise stated. TYPE REF APPLICATION ID mm OD mm AB 1.6/100 Breathing air hose blue 10 16 18 100 Reinf PVC AL 1.4/30 AL 1.4/100 AL 1.5/30 AL 1.5/100 AC 1.5 Air Air Air Air Air 6.3 6.3 8 8 8 13 13 14 14 14 18 18 18 18 20 30 100 30 100 30 Reinf Reinf Reinf Reinf Reinf BR 1.5/100 Black anti-static 8 16 20 100 Rubber RA 1.5/100 Air hose red 8 14 20 100 R/R.ALLOY RPUA 1.4/30 RPUA 1.5/30 RPUA 1.5/100 Light air hose red Light air hose red Light air hose red 6.3 8 8 11 12 12 20 20 20 30 30 100 Reinf PUA Reinf PUA Reinf PUA LF 1.4 LF 1.6 Fluid hose clear Fluid hose clear 6.3 9.6 13 16 20 15 per metre * per metre R/PU + FEP R/PU + FEP LM 1.4 LM 1.6 Fluid hose clear Fluid hose clear 6.3 9.6 11 14 20 15 per metre * per metre R/PU + PA11 R/PU + PA11 LMC 1.4 LMC 1.6 Fluid hose conductive Fluid hose conductive 6.3 9.6 11 14 20 15 * per metre * per metre R/TR.PA R/TR.PA LPC 1.4 LPC 1.6 Fluid hose (BK) cond Fluid hose (BK) cond 6.3 9.6 12 15 20 15 * per metre * per metre R/PU + PA R/PU + PA LPV 1.4 LPV 1.6 LPV 1.8 Fluid hose black Fluid hose black Fluid hose black 6.3 9.6 13 13 16 19 20 20 20 per metre per metre per metre R/PU + PA R/PU + PA R/PU + PA LX 1.3 Fluid hose clear - very flexible 4 10 35 per metre R/PU + PA12 MA 1.4 Fluid hose, BK,RD,TR 6.3 11 10 per metre Coex PU/PA LP 1.8 Suction/Pressure hose (Bk) 13 Suction/Pressure hose (Graco) 19 Suction/Pressure hose (Graco) 25 25 28 38 15 34 34 per metre per metre per metre R/Pu + PA Rubber/nylon Rubber/nylon per metre R/PU + PA plus Coex PU/PE NEW NEWSR 1.12 SR 1.16 hose hose hose hose hose red red red red silver conductive MWP Bar COIL SIZE m BUILD VOW1.4.5 Twinned Air & Fluid Hose LPV1.4 + MO1.5 Pressure fed paint spray * Asterisked products are non stock, special order lines. Minimum quantity may apply. PVC PVC PVC PVC PU Low Pressure Tubing and Connections NylonTubing 30 metre coils. Stock colour natural. Black, blue, red, green available to special order. Larger coils to special order. Metric sizes. Imperial sizes also available, please enquire. NB: Hoses listed on this page are all non-conductive TYPE REF ENF 4/25 ENF 5/33 ENF 6/45 ENF 8/6 ENF 10/8 ENF 12/10 ENF 16/12 ENF 22/17 OD mm 4 5 6 8 10 12 16 22 ID mm 2.5 3.3 4.5 6 8 10 12 17 MWP PSI 377 225 275 250 250 200 260 225 30m COIL TYPE REF ENF 5/3 ENF 6/4 ENF 8/55 ENF 10/7 ENF 12/8.5 ENF 15/12 ENF 18/14 ENF 28/22 OD mm 5 6 8 10 12 15 18 28 ID mm 3 4 5.5 7 8.5 12 14 22 25m COIL TYPE REF PTFE 10/8 PTFE 12/10 OD mm 10 12 ID mm 8 10 MWP PSI 348 225 310 310 304 200 225 220 30m COIL PTFE Tubing TYPE REF PTFE 4/25 PTFE 6/4 PTFE 8/5 PTFE 8/6 OD m 4 6 8 8 ID mm 2.5 4 5 6 - 25m COIL - NB. Other sizes by enquiry. Polyethylene Tubing 30 metre coils. Stock colour natural TYPE REF EPF 6/4 EPF 10/8 OD mm ID mm MWP PSI 6 10 4 8 180 120 30m COIL TYPE REF EPF 8/6 OD mm ID mm 8 6 MWP PSI 30m COIL 150 76 Series Tubing Connections Stainless steel wetted section-ideal for water based materials TYPE REF 76-032/39 76-069/39 76-031/39 76-068/39 DESCRIPTION 1/4 BSP(F) for 4x6mm tubing 3/8 BSP(F) for 4x6mm tubing 1/4 NPSM(F) for 4x6mm tubing 3/8 NPSM(F) for 4x6mm tubing 76-142/39 76-179/39 76-141/39 76-178/39 1/4 3/8 1/4 3/8 BSP(F) for 6x8mm tubing BSP(F) for 6x8mm tubing NPSMF) for 6x8mm tubing NPSM(F) for 6x8mm tubing 76-252/39 76-289/39 76-251/39 76-288/39 76-289/39 1/4 3/8 1/4 3/8 3/8 BSP(F) for 8x10mm tubing BSP(F) for 8x10mm tubing NPSM(F) for 8x10mm tubing NPSM(F) for 8x10mm tubing BSP(F) for 8x10mm tubing These connections feature a ‘loose’ nut and 60 degree cone seat. Connectors are available in 3/8 and 1/4 BSP and NPSM forms. The wetted section is stainless steel 304 and the ferrule and nut are nickel plated brass, supplied with a spring guard as standard. Low Pressure Hose Assemblies Air Hose Assemblies Air hose assemblies with crimped fittings NB: Air Hose Assemblies in this listing are non conductive unless otherwise stated TYPE REF ID MATERIAL Traditional Top Quality PVC Hose AL 1.4 1/4 PVC red Standard lengths 5m 7.5m 10m 15m - others to order AL 1.5 5/16 PVC red Breathing Air Hose PVC AB 1.6 3/8 PVC blue Lightweight Ultra-Airflex PU Hose RPUA 1.4 1/4 PU alloy red RPUA 1.5 5/16 PU alloy red Superflexible Rubber Style Hose RA 1.5 5/16 Rubber alloy red Conductive Hose AC 1.5 5/16 Conductive air hose Silver 1. Air hose assemblies can be supplied with QD connection. (including gun plug) 2. Re-usable connections could be fitted instead of crimped on hose to all types on the listing. Low Pressure Fluid Hose Assemblies Fluid hose assemblies with crimped fittings NB: Fluid Hose assemblies in this listing are non-conductive unless otherwise stated TYPE REF ID MATERIAL Conductive Fluid Hose LPC 1.4 1/4 PU, Nylon lined Standard lengths 5m 7.5m 10m 15m - others to order LPC 1.6 3/8 PU, Nylon lined LMC 1.6 3/8 PU, Nylon lined Traditional Fluid Hose LPV 1.4 1/4 LPV 1.6 3/8 PU, Nylon lined PU, Nylon lined PTFE Lined Hose (FEP 140) LF 1.4 1/4 LF 1.6 3/8 PU, PTFE lined PU, PTFE lined Lightweight Fluid Hose LM 1.4 1/4 LM 1.6 3/8 PU, Nylon lined PU, Nylon lined NOTE LPC and LMC are conductive hoses. (To special order only) 1. Re-usable couplings can be fitted instead of crimped on hose to all types on the listing. NB: Choose carefully, conductive or non-conductive Low pressure Twin Hose Assemblies Twin Fluid & Air: VOW 1.4.5 LPV 1.4 and MO 1.5 hose assembly c/w 3/8 BSP(F) on 1/4” ID fluid hose, 1/4 BSP(F) on 5/16” ID air hose (76 series stainless steel wetted section connections) TYPE REF VOW1.4.5:2.2:B VOW1.4.5:5:B VOW1.4.5:7.5:B VOW1.4.5:10:B VOW1.4.5:15:B VOW1.4.5 LENGTH 2.2 metres 5 metres 7.5 metres 10 metres 15 metres Hose Sleeving Available as follows:PVCT 2/400 PVCT 3/400 GW30 BK GW40 GR PVC sleeve 2" PVC sleeve 3" Polyester braid 25/30mm Polyester braid 40/60mm Approx 200m roll Approx 200m roll HVLP Turbine Hoses & Accessories TYPE REF HVLP-8-NPC DESCRIPTION 8 metre spiral wound hose with swaged connections. 3/4 BSP(F) and QD connection for gun. Ideal for applications where excess heat is not a problem HVLP-9-CNPC 9 metre combination hose comprising 4 metre light spiral wound hose, 5 metre heavy reinforced hose, jointed and complete with 3/4 BSP(F) and QD gun connection HC-02 HVLP 1/E HVLP 1/E/M20 HVLP 3/E HVLP 5/E HVLP 6/E HVLP 8/E HVLP 9/E HVLP 10/E 17 x 17mm nylon hose coupler 3/4” screw ring BSP for 3/4” hose tail. Nickel plated M20 screw ring for 3/4” hose tail 18mm diameter hose tail, brass QD coupling tail. 18mm brass QD coupling. Nickel plated Spiral PVC hose smooth bore black (per metre) Heavy delivery hose smooth bore black (per metre) Hose joiner QD tail x 3/4” male thread. 400 gauge 400 gauge per metre per metre Low Pressure Hose Connections Reusable couplings for low pressure (60 Bar) brass nickel plated for air and low pressure fluid hoses with stainless steel wetter section. Low Pressure Reusable Hose Connections TYPE REF DESCRIPTION 76-221/39 76-222/39 76-236/39 76-238/39 76-239/39 76-341/39 76-342/39 76-343/39 76-358/39 76-359/39 76-303/31 HOSE BORE 1/4 NPSM(F) 3/16 1/4 BSP(F) 3/16 M16x1.5(F) 3/16 3/8 NPSM(F) 3/16 3/8 BSP(F) 3/16 1/4 NPSM(F) 1/4 1/4 BSP(F) 1/4 M14 x 1(F) 1/4 3/8 NPSM(F) 1/4 3/8 BSP(F) 1/4 Spring guard for 300 series body FOR HOSE TYPE For LX1.3 For LX1.3 For LX1.3 For LX1.3 For LX1.3 For LM, MA, For LM, MA, For LM, MA, For LM, MA, For LM, MA, (above) 76-441/39 76-442/39 76-458/39 76-459/39 1/4 1/4 3/8 3/8 NPSM(F) BSP(F) NPSM(F) BSP(F) 1/4 1/4 1/4 1/4 For For For For AL, AL, AL, AL, LF, LF, LF, LF, 76-561/39 76-562/39 76-570/6 76-578/39 76-579/39 1/4 1/4 1/4 3/8 3/8 NPSM(F) BSP(F) BSP(M) NPSM(F) BSP(F) 5/16 5/16 5/16 5/16 5/16 For For For For For AL, AL, AL, AL, AL, RA, RA, RA, RA, RA, 76-688/39 76-689/39 76-691/39 76-692/39 3/8 3/8 1/4 1/4 NPSM(F) BSP(F) NPSM(F) BSP(F) 3/8 3/8 3/8 3/8 For For For For AB, AB, AB, AB, LF, LF, LF, LF, 76-761/39 76-762/39 76-778/39 76-779/39 1/4 1/4 3/8 3/8 NPSM(F) BSP(F) NPSM(F) BSP(F) 5/16 5/16 5/16 5/16 For For For For MA, MA, MA, MA, MO, MO, MO, MO, RPUA, RPUA, RPUA, RPUA, 76-888/39 76-889/39 76-891/39 76-892/39 3/8 3/8 1/4 1/4 NPSM(F) BSP(F) NPSM(F) BSP(F) 3/8 3/8 3/8 3/8 For For For For MA, MA, MA, MA, MO MO MO MO & & & & Low pressure nuts/tails/ferrules H-12-7 H-14-8 H-16-11 H-19-14 Ferrule Ferrule Ferrule Ferrule for for for for hose hose hose hose up up up up to to to to 11.5mm 13.5mm 15.5mm 18.5mm OD OD OD OD S-144 F104 S-109 176-009 S-100 Hose tail for 1/4 hose 1/4 BSP Nut for 5/16 hose tail & 1/4 hose tail Hose tail for 5/16 hose 3/8BSP nut (nickled) Tail for 3/8 nut 1/4 hose C-13-K100 C-14-K100 C-16-K100 O clip for 12.5mm OD hose O clip for 14.0mm OD hose O clip for 16.0mm OD hose P-240-K20 P-241-K20 Push in fitting 1/4 BSP pack 20 for 1/4 hose Push in fitting 3/8 BSP pack 20 for 3/8 hose PXC058BK Tubing cutter (illustrated) (Pack 100) (Pack 100) (Pack 100) MF, MF, MF, MF, MF, LPC LPC LPC LPC MO MO MO MO MO & & & & LPC LPC LPC LPC LPC LPC, LPC, LPC, LPC, & & & & & RPUA1.4 RPUA1.4 RPUA1.4 RPUA1.4 RPUA1.4 LPV1.4 LPV1.4 LPV1.4 LPV1.4 & & & & & LPV1.5 LPV1.5 LPV1.5 LPV1.5 LPV1.5 LPV1.6 LPV1.6 LPV1.6 LPV1.6 LM LM LM LM RPUA1.6 RPUA1.6 RPUA1.6 RPUA1.6 & & & & LMC1.5 LMC1.5 LMC1.5 LMC1.5 Air Controls TYPE REF DESCRIPTION Air Regulators 78-210/0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge. Quick Detach Hi-Flo Air Couplings & Tails 50-401 50-407 50-427 50-437 50-447 50-408 50-409 50-410 50-417 50-418 Quick detach doubleacting coupling1/4 BSP male (Plastic sleeve) Quick detach doubleacting coupling 9mm hose tail (Plastic sleeve) Quick detach hi-flo air coupling 1/4 BSP(M) connection Quick detach hi-flo air coupling 9mm tail connection Quick detach hi-flo air coupling 1/4 BSP(F) connection QD air connection 1/2 BSP M QD air connection plug 1/4 BSP(F) QD air connection plug 1/4 BSP(M) QD air connection plug 9mm tail connection QD air valve 1/8 BSP(M) connection QD air connection plug for 6mm bore hose 74-330 LP 2 outlet air connector Y with ball valves 1/4 BSP(F) x 2 x 1/4 BSP(M) 74-301.4 LP 3 outlet fluid Y connection, swivel nut 3/8 BSP(F) x 3 x 3/8 BSP fixed (one x 3/8 BSP plug included). 50-402 FM-40-03-W * * * * * * * * * * * 78-210/0 50-407 74-330 74-301.4 Air filter regulator 1/4BSP inlet. Outlet 0-150psi max. c/w Gauge and mounting bracket. Lockable with semi automatic drain and metal bowl guard. FM-40-03W 2020-2545 Mini air filter regulator 1/4 BSP inlet - 1 x 1/4BSP(F) outlet c/w Gauge, Polycarbonate bowl with semi automatic drain 2020-2545 Textile Braided Hydraulic Hose NY Series High Quality - Swiss Manufactured Provides Outstanding Performance for a Wide Range of Applications. Exitflex have for more than a quarter of a century specialised in and developed thermoplastic hose construction. This experience provides you with high quality hoses benefiting from being lightweight, flexible and having long lasting durability. Already known around the world as a leading manufacturer of paint spray hoses, Exitflex is now ready to serve the needs of the industrial hose market with the NY product range. Standard range includes hoses suitable for: • Hydraulics - Low to Medium, Medium and High Pressure • Lubrication & Greasing Lines • Solvent & Chemical Lines • Water Cleaning • Gases & Compressed Air • Servo Controls • Agricultural Equipment • Machine Tools • Fork Trucks (Single & twin lines) • Air Conditioning • Plus many more.... Please contact us for further details or to discuss your requirements telephone, fax or e-mail. (See inside cover for details) Textile Braided Hydraulic Hose MWP (BAR) WEIGHT PER METRE (g/m) STANDARD COLOURS 85 85 85 85 70 70 50 33 47 67 75 117 157 175 Bk Bk Bk Bk Bk Bk Bk PA PA PA PA PA PA PA PA PA PA PA PA PA PA 1 1 1 1 1 1 1 Textile Textile Textile Textile Textile Textile Textile Low Pressure Hydraulic Lubrication Solvent Lines. Compiles with Din 20.021 (2TE). Non Pin-Pricked cover for gas applications recommend pin-pricking the cover. NY 343 1.2 1.25 1.3 1.4 1.5 1.6 1.8 1/8 5/32 3/16 1/4 5/16 3/8 1/2 6.6 7.9 9.3 10.9 12.8 14.6 18.1 150 150 150 125 115 95 85 30 36 54 72 93 112 154 Bk Bk Bk Bk Bk Bk Bk PE PE PE PE PE PE PE PU PU PU PU PU PU PU 1 1 1 1 1 1 1 Textile Textile Textile Textile Textile Textile Textile Lubrication and greasing servo control systems hydrostatic transmission drain line for machine tools and hydraulic equipment complies with and exceeds SAE 100 R3 Din 20.021 (2TE & 3TE) cover is pin-pricked. NY 321 2.4 2.5 2.6 2.8 2.12 1/4 5/16 3/8 1/2 3/4 11.5 14.2 15.6 20.2 27.2 210 175 160 140 85 78 115 135 197 280 Bk Bk Bk Bk Bk PA PA PA PA PA PU PU PU PU PU 2 2 2 2 2 Textile Textile Textile Textile Textile Medium pressure hydraulic solvent lines. Lubrication CO2 Carbon Dioxide and LPG gas lines. SAE 100 R7 pin-pricked IS0 3949 BS4983: 1973 NY 1.4 1.5 1/4 5/16 9.8 12.2 100 100 46 66 Bk Bk PA PA PA PA 1 Textile 1 Textile Low/medium pressure hydraulic also low/medium pressure water cleaning 2.2 2.25 2.3 2.4 2.5 2.6 2.8 1/8 5/32 3/16 1/4 5/16 3/8 1/2 6.8 8.3 9.7 12.1 13.8 16.1 19.4 210 240 210 215 190 160 140 34 49 63 97 116 157 199 Bk Bk Bk Bk Bk Bk Bk PE-E PE-E PE-E PE-E PE-E PE-E PE-E PU PU PU PU PU PU PU 2 2 2 2 2 2 2 Textile Textile Textile Textile Textile Textile Textile SAE 100 R7 150 3949 BS 4983: 1984 Type 1 Din 24951 medium pressure hydraulics greasing, lubrication. Agricultural equipment fork trucks machine tools and similar. Cover is pin-pricked. 1.3 1.4 1.5 1.6 1.8 3/16 1/4 5/16 3/8 1/2 9.0 12.3 13.8 16.0 19.5 350 350 350 275 240 51 105 113 151 198 Bk Bk Bk Bk Bk PE-E PE-E PE-E PE-E PE-E PU PU PU PU PU 1 1 1 1 1 Aramid Aramid Aramid Aramid Aramid SAE 100 RD IS0 3949 BS 4983: 1984 Type 1 Din 24951 high pressure hydraulic solvent chemical lines which meet SAE standard J517D section R8 mixed gas applications cover is pin-pricked NY 328 COVER BRAIDING OD(mm) 8 9.8 12.2 13.7 17.7 21.3 24.4 INNER TUBE ID 3/16 1/4 5/16 3/8 1/2 5/8 3/4 REF NY 223 1.3 1.4 1.5 1.6 1.8 1.10 1.12 NY 347 APPLICATION HYDRAULIC DUTY The NY Hose programme is designed to provide high quality and a full range for most applications. Welded Twin Hoses available at price of hoses + 10%. Special colours can be produced subject to volume NB: All hoses in this listing are non-conductive. NY 343p is also available with a Polyamid Inner Tube. HIGH PRESSURE THERMOPLASTIC HOSES PAINT SPRAY . HYDRAULICS . WATER JETTING High Pressure Thermoplastic Hose Technology leaders Swiss manufacturing know how High value Flexible yet hard wearing Hoses for most applications Exitflex Programme EXITFLEX high pressure Thermoplastic Hoses are suitable for:- HYDRAULICS, WATER JETTING and PAINT SPRAYING EXITFLEX take particular care with the braiding technique of their hose range. The technologies employed provide accurate control over the characteristics required for different hose grades. Inner Tube Wire braided reinforcement is of woven high tensile carbon steel braids which give the hose its great strength and ensure 100% electrical continuity throughout the hose. High specification textile braided hoses are also in the range for use where conductivity is not required. Wire Reinforcement Top quality materials used in the manufacture of EXITFLEX hoses, combined with Swiss know how, gives an extra strong light weight hose having excellent abrasion and cover wear resistance in addition to tolerance to a great many chemicals, solvents and water. Textile braided hoses are available both in conductive and nonconductive varieties. The range in particular has excellent lay flat characteristics and superior pulsation absorption capabilities. Textile Interlayer (Grade PA2, EX2) Wire Reinforcement (Grade PA2, EX2) Outer Cover EXITFLEX is suitable for continuous use with many solvents, however it is recommended that final selection should be made after consulting the EXITFLEX chemical resistance chart or after consultation with your EXITFLEX distributor. EXITFLEX are major suppliers to the paint spray industry with the finest range of products available in the market place today. Call us today to see what we can can do for you High Pressure Hoses MWP STANDARD COLOURS INNER TUBE COVER BRAIDING APPLICATION OD(mm) AEP1.3 3/16” 9.0 300 56 Bk PE PU 1 x Textile DP 1.3 3/16” 9.2 250 85 Br PE PU 1 x C.Steel Gas/Hydraulic (perf) Non conductive Drain Cleaning ESP 2.4 ESP 2.8 1/4” 1/2” 15.8 21.0 254 204 300 640 Bk Bk PE PE PU PU 2 x St.Steel 2 x St.Steel Gas/Hydraulic(perf) Gas/Hydraulic(perf) EX 1.3 EX 1.4 EXP 1.4 EX 1.6 EX 1.8 EX2.4 EX 2.6 EX 2.8 EX 2.12 3/16” 1/4” 1/4” 3/8” 1/2” 1/4” 3/8” 1/2” 3/4” 9.5 11.7 11.7 15.8 18.5 14.0 17.0 21.0 30.2 350 325 325 250 200 450 400 350 275 105 165 165 240 310 300 440 540 950 Bk Bk Bk Bk Bk Bk Bk Bk Bk PE PE PE PE PE PE PE PE PE PU PU PU PU PU PU PU PU PU 1 1 1 1 1 2 2 2 2 Hydraulic/Waterjetting Hydraulic/Waterjetting Hydraulic/Gas (perf) Hydraulic/Waterjetting Hydraulic/Waterjetting Hydraulic/Waterjetting Hydraulic/Waterjetting Hydraulic/Waterjetting Hydraulic/Waterjetting HD 2.4 1/4” 16.6 675 230 Rd PA PU HDP 2.4 1/4” 16.6 675 230 Rd PA PU HD 2.6 3/8” 17.5 580 325 Rd PA PU HX 2.8 1/2” 22.0 250 290 Rd PE PU 1 x C Steel + 1 x Aramid 1 x C Steel + 1 x Aramid 1 x C Steel + 1 x Aramid 2 x Textile HY 1.7 HY 1.8 6.7 8.0 11.0 13.7 250 250 125 190 Bk BK PE-E PE-E PU PU 1 x C Steel 1 x C Steel Hydraulic/Waterjetting Non conductive Hydraulic Hydraulic JET 1.3 3/16” 9.8 400 120 Bk PE-E PU 1 x C Steel Waterjetting PAP 2.4 1/4” 14.0 450 300 Bn PA PU 2 x C Steel Hydraulic/Gas (perf) REF ID WEIGHT PER METRE (g/m) HYDRAULICS. WATERJETTING. GAS x x x x x x x x x C C C C C C C C C Steel Steel Steel Steel Steel Steel Steel Steel Steel Hydraulic/Heavy Duty Hydraulic/Gas (perf) Hydraulic/Heavy Duty Extras & Special Processes * Reels Pin Prick Cover Welding 2 hoses H.R.S. H.S. Swage and control Continuous Printing Special Colours Safety Ratio Conductivity Asterisked products are special order non stock lines. Minimum quantity may apply. There is a charge per reel for all products shipped on a reel. Reels are returnable for full credit, return carriage not credited. Add 5% to price. Add 10% to price of hoses Heat resistant additive. Add 5% to price. Hydrolized additive. Add 5% to price. Extra Or specified unbroken lengths. Add 10% to price. All hoses are printed EXITFLEX as standard. Special print may be possible subject to a minimum quantity of 1000 metres and will be charged per character set up charge. Minimum Quantity 500metres upon order acceptance. NB Lead time will be extended for special colours. Hoses are quoted at a 4:1 Safety Ratio with the exception of AEP, ESP which are quoted at a 5:1 Safety Radio. All hoses listed on P.14 and 15 are conductive except where stated otherwise. High Pressure Hoses MWP INNER TUBE COVER 13.6 700 225 Rd PA PU HD 2.6 3/8” 17.5 560 325 Rd PA PU HD 2.8 1/4” 22.0 450 565 Rd PA PU HD 2.12 3/4” 32.0 375 785 Rd PA PU KX 2.3 KX 2.4 KX 2.6 3/16” 1/4” 3/8” 10.2 12.3 16.8 235 227 225 75 95 190 Bl Bl Bl PA PA PA PA PA PA PA PA PA PA PA PA 1.2 1.3 1.4 1.6 1.8 2.4 2.6 2.8 2.12 1/8” 3/16” 1/4” 3/8” 1/2” 1/4” 3/8” 1/2” 3/4” 6.9 9.3 11.7 15.5 18.5 14.0 17.5 21.0 30.2 350 350 325 250 200 450 400 350 275 60 105 165 240 310 300 440 540 950 Bn Bn Bn Bn Bn Bn Bn Bn Bn PAT 2.4 1/4” 12.9 425 200 PAT 2.6 3/8” 17.8 325 325 APPLICATION OD(mm) 1/4” BRAIDING ID HD 2.4 STANDARD COLOURS REF WEIGHT PER METRE (g/m) PAINT SPRAY DUTY 1 x C Steel 1 x Aramid 1 x C Steel 1 x Aramid 1 x C Steel 1 x Aramid 1 x C Steel 1 x Aramid H.D / PaintSpray PU PU PU 2 x Textile 2 x Textile 2 x Textile PaintSpray Pulsating PaintSpray Pulsating Electric Piston Pumps PA PA PA PA PA PA PA PA PA PU PU PU PU PU PU PU PU PU 1 1 1 1 1 2 2 2 2 HP HP HP HP HP HP HP HP HP Bn PA PU Bn PA PU KMW 2.3 (KX2.3 + MO + 14) Welded Twin Bl + Bn PA PU 2 x Textile AAA Paintspray PR 1.3 3/16” 9.3 270 110 Bk PA PU 1 x C Steel PR 1.4 1/4” 11.7 270 165 Bk PA PU 1 x C Steel Paintspray (Electric Diaphragm Pumps) Paintspray (Electric Diaphragm Pumps) SX 2.6 3/8” 17.8 250 200 Bl PA PU 2 x Textile Paintspray (Electric Piston Pumps) TC TC TC TC TC TC TC 1.2 1.3 1.4 1.6 1.8 2.8 2.12 1/8” 3/16” 1/4” 3/8” 1/2” 1/2” 3/4” 6.9 9.3 11.7 15.3 18.5 21.5 30 350 350 325 250 200 350 275 85 125 190 270 340 580 1000 Bk Bk Bk Bk Bk Bk Bk FEP140 FEP140 FEP140 FEP140 FEP140 FEP140 FEP140 PU PU PU PU PU PU PU 1 1 1 1 1 2 2 Multipurpose Multipurpose Multipurpose Multipurpose Multipurpose Multipurpose Multipurpose WE 2.3 WE 2.4 3/16” 1/4” 11.5 13.6 550 550 140 170 TrBn TrBn PA PA PU PU x x x x x x x x x C C C C C C C C C Steel Steel Steel Steel Steel Steel Steel Steel Steel 1 x C Steel + 1 x Textile 1 x C Steel + 1 x Textile x x x x x x x C C C C C C C Steel Steel Steel Steel Steel Steel Steel Aramid/Steel 2 x C Steel H.D / PaintSpray H.D / PaintSpray H.D / PaintSpray Paintspray Paintspray Paintspray Paintspray Paintspray Paintspray Paintspray Paintspray Paintspray HP Paintspray HP Paintspray Safety Whipend Safety Whipend (paintspray) Colour Code: Bl = blue; Bn = blue navy; Bk = black; Rd = red; Br = bronze; Tr = transleucent NB: All paint spray hoses both textile and wire braided are conductive. High Pressure Hose Assemblies The assemblies shown on these pages represent the most commonly purchased lengths. Exitflex are pleased to offer hose assemblies to any length. Please call for a quotation on any lenghts not shown. NB: PRICES INCLUDE ALL FITTINGS. IMPORTANT PLEASE SPECIFY THREADS REQUIRED Welded Twin Hoses KMW 2.3 Welded twinned hose assemblies for Air Assisted Airless systems comprising 2 textile 3/16 fluid hose plus low pressure air hose. MO 1/4 bore. MWP fluid 235 Bar. PMW 1.3 Welded twin hose assemblies for Air Assisted Airless systems comprising 1 wire 3/16 fluid hose plus low pressure 1/4 air hose. MWP fluid 270 Bar. Standard lengths shown others to order NB. KMW 2.3 has conductive fluid hose, non conductive air hose PA Wire Braided Hoses For Pneumatic Airless Systems PA1.2 1/8 bore MWP Bar 350 PA1.3 3/16 bore 350 PA1.4 1/4 bore 325 PA1.6 3/8 bore 250 PA1.8 1/2 bore 200 PA2.4 1/4 bore 450 PA2.6 3/8 bore 400 PA2.8 1/2 bore 350 1 Standard lengths 1, 2 ,3, 5, 7.5, 10 and 15 metres - other lengths to order PAT Hoses With 1 Wire and 1 Textile Braid for Pneumatic Airless Systems PAT2.4 1/4 bore MWP Bar 425 PAT2.6 3/8 bore 325 Standard lengths 5, 7.5, 10 and 15 metre other lengths to order HD Extra Pressure Heavy Duty Paint Spray Hose HD2.4 1/4 bore MWP Bar 700 HD2.6 3/8 bore 560 Standard lengths 7.5, 10 and 15 metre other lengths to order IMPORTANT Please specify clearly your end connection thread requirements WE Safety Whipends WE 2.3 3/16 bore 550 WE 2.4 1/4 bore MWP Bar 550 Standard length 3 metre other lengths to order WE safety whipends are factory assembled and proof tested. All assemblies come with 1/4 NPSM(F) x 1/4 NPT(M) stainless steel couplings permanently swaged to the hose - guaranteed! NB: All hoses listed on pages 16-17 both wire and textile braided are conductive High Pressure Hose Assemblies PR Wire Braided Pulsating Hoses For Diaphragm Electrical Pumps PR1.3 3/16 bore MWP Bar 270 5 Metre 7.5 Metre 10 Metre 15 Metre PR1.4 1/4 bore 270 Standard lengths shown others to order SX Hose Pulsating Textile Braided Hoses For Piston Electric Pumps SX2.6 3/8 bore MWP Bar 225 5 Metre 7.5 Metre 15 Metre Standard lengths shown others to order KX Hose Expanding/Textile Braided Pulsating Hoses for Electric Piston Pumps KX2.3 3/16 bore MWP Bar 235 5 Metre 7.5 Metre 15 Metre KX2.4 1/4 bore 235 Standard lengths shown others to order TC Hose Multi Purpose Teflon Cored Wire Braided Hoses TC1.4 1/4 bore MWP Bar 275 7.5 Metre 10 Metre 15 Metre TC1.6 3/8 bore 250 Standard lengths shown others to order JET and EX Hoses Wire Braided Hoses For Water Jetting JET 1.3 NB MWP SHOWN AT 4:1 & 2.5:1 RATIO 3/16 bore MWP Bar 400/560 3 Metre Standard lengths shown others to order 7 Metre 10 Metre - EX 2.4 1/4 bore 450/720 EX 2.8 1/2 bore 350/560 DP Copper Drain Wire Braided Hoses For Drain Cleaning DP1.3 3/16 bore MWP Bar 250/400 Standard lengths shown others to order NB MWP SHOWN AT 4:1 RATIO AND 2.5:1 RATIO 7 Metre 10 Metre 15 Metre 20 Metre Hose Sleeving PVCT 2/500 PVCT 3/500 PVCT 3/1000 PVCT 8/500 GW30 BK GW40 GR PVC sleeve 2" PVC sleeve 3" PVC sleeve 3" PVC sleeve 8" Polyester braid 25/30mm Polyester braid 40/60mm Approx. 500ft Approx. 500ft Approx. 250ft Approx. 500ft 50 metre roll 50 metre roll roll roll roll roll 500 gauge 500 gauge 1000 gauge 500 gauge Per metre Per metre Reusable Couplings for High Pressure Hose (Bichromated Steel) Reusable Couplings For Single (1) Braided Hose 77-001/2 77-001/38 77-011/1 77-017/2 77-017/38 77-019/1 77-020/1 77-021/2 77-022/1 77-023/1 77-024/2 77-026/1 77-030/1 77-032/1 77-034/2 77-036/1 77-040/1 77-040/38 77-042/1 77-042/38 77-044/1 77-046/1 77-050/2 77-050/38 77-052/2 77-052/38 77-054/1 77-056/2 77-068/1 77-071/2 77-072/2 77-073/1 77-074/2 * * * * * * 1/4 BSP(F) swivel (1/4) Ditto in stainless steel nipple. Black 3/8 BSP(F) swivel (3/8) 1/4 NPSM(F) swivel (1/4) Ditto in stainless steel nipple. Black 1/4 NPT(M) (3/8) 1/4 NPT(M) (1/4) 1/4 BSP(F) swivel (1/4) JIC 1/2 x 20(F) swivel (3/8) M16 x 150(F) swivel 1/4 NPSM(F) swivel (1/4) 3/8 NPSM(F) swivel (3/8) 3/8 NPT(M) (3/8) M16 x 150(F) swivel (1/4) M16 x 150(F) swivel (3/8) JIC 1/2 x 20(F) swivel (1/4) 1/4 BSP(F) swivel (1/8) Ditto in stainless steel nipple. Black 1/4 NPSM(F) swivel (1/8) Ditto in stainless steel nipple. Black JIC 1/2 x 20(F) swivel (1/8) M16 x 150(F) swivel (1/8) 1/4 BSP(F) swivel (3/16) Ditto in stainless steel nipple. Black 1/4 NPSM(F) swivel (3/8) Ditto in stainless steel nipple. Black JIC 1/2 x 20(F) swivel (3/16) M16 x 150(F) swivel (3/16) JIC 3/4 x 16(F) swivel (3/8) 1/4 BSP(F) swivel (SX 1/4) JIC 1/2 x 20 swivel (SX 1/4) M16 x 150(F) swivel (SX 1/4) 1/4 NPSM(F) swivel (SX 1/4) nut. Nickel body nut. Nickel body nut. Nickel body nut. Nickel body nut. Nickel body nut. Nickel body Reusable Couplings For Double (2) Braided Hose 77-211/2 77-226/2 77-230/1 77-268/2 * * 3/8 3/8 3/8 3/4 BSP(F) swivel (3/8 DB) NPSM(F) swivel (3/8 DB) NPT(M) (3/8 DB) x 16JIC(F) swivel (3/8 DB) Spring Guards For Hose Assemblies 34-010/31 34-013/31 34-014/31 34-016/31 34-023/31 34-024/31 34-026/31 34-027/31 34-040/3 34-041/3 34-042/3 * * * * * * * Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring handle and rubber guard (PX 1.3/PA+PR 1.3) guard (PX 1.4/PA+PR 1.4, SX 2.4)) guard (PA 1.6) guard (SX2.3) guard (PX 2.4+ST 1.4) guard (PA+PAT 2.4) guard (PA,PAT,SX 2.6) guard (SR 1.8) guard (SR 1.12) guard (SR 1.16) * Stocked lines, others to order Unions, Ferrules & Swivels Water Fittings & Unions TYPE REF 74-617/0 74-618/0 74-621/0 74-632/1 74-633/1 74-636/11 74-637/11 74-640/22 74-641/11 DESCRIPTION Union 1/4 BSP(F) x M22 x 150(F) swivel nut Union 3/8 BSP(F) x M22 x 150(F) swivel nut Locking nut M22 x 150(F) (water) Union 1/4 BSP(M) x M22 x 150(M) Union 3/8 BSP(M) x M22 x 150(M) Nipple for 1/4 ID hose (water) Nipple for 3/8 ID hose (water) Nitrile "O" ring (water) Nut HP 7/8 x 9 UNC High Pressure Swage Ferrules Bichromated Mild Steel TYPE REF DESCRIPTION 75-800/51 F1.2(10,3-4,2-6-17,6) 75-801/51 F2.2 75-803/51 F1.3 (DF1.3) 75-805/51 F1.3 (13,7-9,7-23,5) 75-806/51 F2.3 (15,4-11,4-9-23,5) 75-807/53 F1.3 (smooth non slotted) JET1.3 75-808/51 F1.3 (11,5-9,7-8,2) DP1.3 75-810/51 F1.4 (17,4-12,4-29) 75-812/51 F2.4 (19,5-14,5-29) 5/16 (1-5) 75-815/51 F2.4 (18,6-13,6-29) SX 2.4 75-820/51 F1.6 (20,8-15,8-14-35) 5/16 (2.5) 75-826/51 F2.6 (24.2-18,6-14,2-35) 75-830/51 F1.8 (23,8-19,1-17,4-36,5) 75-835/51 F2.8 (27,8-22,8-17,4-36,5) 75-837/51 F1.12 75-838/51 F2.12 75-860/51 F1.4 (16.5-11,5-11,5-29) PAM1.4 75-870/51 F1.6 (20-15-14,5-35) PAM1.6 NB Ferrules in stainless steel by special enquiry. Selected sizes Extended delivery High Pressure Swivels TYPE REF DESCRIPTION 70-110/2 1/4 BSP(M) x 1/4 BSP(F) 70-220/2 1/4 NPS(M) x 1/4 NPSM(F) 70-220/34 1/4 NPS(M) x 1/4 NPSM(F) ST.STEEL 70-290/1 1/4 NPS(M) x M14x1(M) 70-440/2 3/8 BSP(M) x 3/8 BSP(F) 70-550/2 3/8 NPS(M) x 3/8 NPSM(F) 70-520/1 3/8 NPS(M) x 1/4 NPSM(F) 70-900/1 1/4 NPS(M) x M18x1.5(M) (Ran-Gema) There is an additional range of Swivels, Filters and Swivel Please enquire about price and availability 517 Bar MWP 517 Bar MWP 517 Bar MWP 517 Bar MWP 517 Bar MWP 517 Bar MWP 517 Bar MWP 517 Bar MWP Filters available to special order. High Pressure Stainless Steel Z Swivels TYPE REF 70-911/1 70-922/2 DESCRIPTION 1/4BSP(M) x 1/4BSP(F) 1/4NPSM(M) x 1/4NPSM(F) 517 Bar MWP 517 Bar MWP Hose Inserts Male or Female Without Ferrule Bichromated Mild Steel TYPE REF 75-001/1 75/001/37 75-003/1 75-007/1 75-008/1 75-009/1 75-010/1 75-011/1 75-011/37 75-012/1 75-013/1 75-014/1 75-015/1 75-017/1 75-017/37 75-018/1 75-019/1 75-020/1 75-021/1 75-026/1 75-026/37 75-030/1 75-032/1 75-032/37 75-034/1 75-036/1 75-037/1 75-038/1 75-040/1 75-042/1 75-042/37 75-043/1 75-044/1 75-045/1 75-046/1 75-048/1 75-049/1 75-050/1 75-050/37 75-051/1 75-052/1 75-052/37 75-053/1 75-054/1 75-055/1 75-056/1 75-056/37 75-057/1 75-059/1 75-062/1 75-063/1 75-064/1 DESCRIPTION 1/4 BSP(F) swivel (1/4) s/pl 19 Ditto stainless black nut 1/4 BSP(F) swivel (3/8) s/pl 19 3/8 BSPM (3/8) 3/8 BSP(F) swivel (1/4) 1/4 BSP(M) (1/4) 3/8 NPSM(F) swivel (1/4) 3/8 BSP(F) swivel (3/8) Ditto stainless black nut 1/4 NPT(M) (1/8) 1/4 NPT(M) (3/16) 1/4 NPS(M) (1/8) 1/4 NPS(M) (3/16) 1/4 NPSM(F) swivel (1/4) s/pl 19 Ditto in stainless steel black nut 1/4 NPSM(F) swivel (1/4) s/pl 17 1/4 NPSM(F) swivel (3/8) s/pl 19 1/4 NPT(M) (1/4) Pipe 6 x 17mm (1/8) O 3/8 NPSM(F) swivel (3/8) Ditto in stainless steel black nut 3/8 NPT(M) (3/8) M16 x 150(F) swivel (1/4) Ditto in stainless steel black nut M16 x 150(F) swivel (3/8) JIC 1/2 x 20(F) swivel (1/4) 1/8 BSP(F) swivel (1/8) JIC 1/2 x 20(F) swivel (3/8) 1/4 BSP(F) swivel (1/8) 1/4 NPSM(F) swivel (1/8) s/pl 19 Ditto in stainless steel black nut 1/4 MPSM(F) swivel (1/8) s/pl 17 JIC 1/2 x 20(F) swivel (1/8) 1/8 NPSM(F) swivel 1/8 M16 x 150(F) swivel (1/8) 1/8 BSP(M) (1/8) s/pl 10 1/4 BSP(M) (1/8) 1/4 BSP(F) swivel 3/16 s/pl 19 Ditto in stainless steel black nut Pipe 6 x 22mm (3/16) 0 1/4 NPSM(F) swivel (3/16) s/pl 19 Ditto in stainless steel black nut 1/4 NPSM(F) swivel (3/16) s/pl 17 JIC 1/2 x 20(F) swivel (3/16) 1/8 BSP(M) (3/16) M16 x 150(F) swivel (3/16) Ditto in stainless steel black nut M16 x 150(M) (3/16) 1/4 BSP(M) (3/16) s/pl 1 M18 x 150(F) swivel (1/4) M18 x 150(F) swivel (5/16) M18 x 150(F) swivel (3/8) Hose Inserts Male or Female Without Ferrule Bichromated Mild Steel REFERENCE 75-065/1 75-066/1 75-067/1 75-068/1 75-070/1 75-071/1 75-072/1 75-073/1 75-074/1 75-075/1 75-076/1 75-077/1 75-080/1 75-081/1 75-082/1 75-084/1 75-085/1 75-088/43 75-089/1 75-090/1 75-092/1 75-093/1 75-094/1 75-111/1 75-112/1 75-202/1 75-203/1 75-204/1 75-211/1 75-227/1 75-240/1 75-241/1 75-251/1 75-258/30 75-401/1 75-411/1 75-417/1 75-426/1 DESCRIPTION Pipe 12 x 20mm (3/8) O 1/8 NPT(M) (3/8) 1/8 NPT(M) (3/16) JIC 3/4 x 16(F) swivel (3/8) JIC 9/16 x 18(M) (1/8) JIC 9/16 x 18(M) (3/16) JIC 9/16 x 18(M) (1/4) JIC 9/16 x 18(M) (3/8) JIC 9/16 x 18(F) swivel (3/8) JIC 1/2 x 20(M) (3/8) JIC 7/16 x 20(F) swivel (1/8) JIC 7/16 x 20(F) swivel (3/16) JIC 7/16 x 20(F) swivel (1/4) 1/2 NPSM(F) swivel (1/2) 1/2 BSP(F) swivel (1/2) JIC 3/4 x 16(F) swivel (1/2) 1/2 NPT(M) (1/2) JIC 9/16 x 18(M) (1/2) stainless steel 1/2 BSP(M) (1/2) 1/4 BSP(F) swivel (5/16) s/pl 19 1/4 NPSM(F) swivel (5/16) s/pl 19 3/8 BSP(F) swivel (5/16) 3/8 NPSM(F) swivel (5/16) 3/4 NPT(M) 3/4 3/4 NPSM(F) swivel (3/4) Round 1/8 BSP(M) (1/8) Round 1/8 BSP(M) (3/16) 0 Round 1/8 BSP(M) (1/4) 0 Round 1/8 BSP(M) long (3/16) 0 Tip nipple 1/8 ID for spray gun end Round M6x100(M) (3/16) short Round M7x100(M) (3/16) 1/4 BSP(M) flat flange (1/4) jet Round 1/8 BSP(M) (3/16) short stainless 1/4" BSP(F) insert for PAM 6mm 3/8" BSP(F) insert for PAM 9mm 1/4" NPSM(F) insert for PAM 6mm 3/8" NPSM(F) insert for PAM 9mm Left Hand Thread Nipple 75-617/1 75-618/1 75-619/1 75-620/1 75-621/1 1/4 1/4 1/4 1/4 1/4 NPSM(F) NPSM(F) NPSM(F) NPSM(F) NPSM(F) SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL (17) (17) (17) (17) (17) (1/8)L.H (3/16)L.H (1/4) L.H (5/16) L.H (3/8) L.H Old Old Old Old Old ref ref ref ref ref 75-317 75-318 75-319 75-320 75-321 Couplings & Adaptors - Male x Male PLEASE NOTE Where stated Swivel Nut. These are not high-pressure swivels. Where a high pressure swivel is required order a 70 or 71 series item. All swivel nuts in this section are not swiveling once tightened down. Popular sizes indicated thus ____ BSP Male x BSP Male 78-034/1 74-001/1 74-001/30 74-002/1 74-002/30 74-003/1 74-003/30 74-004/1 74-004/30 74-005/1 74-005/30 174-811/30 74-406/15 74-007 ____ ____ ____ ____ ____ ____ ____ 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/8 1/4 1/4 BSP(M) x 3/8 BSP(M) coned Intl Hex Drive BSP(M) x 1/4 BSP(M) BSP(M) x 1/4 BSP(M) stainless BSP(M) x 3/8 BSP(M) BSP(M) x 3/8 BSP(M) stainless BSP(M) x 3/8 BSP(M) BSP(M) x 3/8 BSP(M) stainless BSP(M) x 1/2 BSP(M) BSP(M) x 1/2 BSP(M) stainless BSP(M) x 1/2 BSP(M) BSP(M) x 1/2 BSP(M) stainless BSP(M) x 1/4 BSP(M) coned stainless Int Hex Drive BSPT(M) x 1/4 BSP(M) coned nickel plated brass Hexagonbody BSP(M) flat faced x 1/4 BSP(M) coned stainless Int Hex Drive NPS/NPT Male x NPS/NPT Male 74-010/1 74-011/1 74-011/30 74-012/1 74-012/30 74-013/1 74-013/30 74-014/1 74-015/1 74-016/1 74-017/1 74-018/1 ____ ____ ____ ____ ____ ____ ____ ____ ____ 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/4 1/4 3/8 NPT(M) short x 3/8 NPT(M) W NPT(M) x 1/4 NPT(M) NPT(M) x 1/4 NPT(M) stainless NPT(M) x 3/8 NPT(M) NPT(M) x 3/8 NPT(M) stainless NPT(M) x 3/8 NPT(M) NPT(M) x 3/8 NPT(M) stainless NPT(M) x 1/2 NPT(M) NPT(M) x 1/2 NPT(M) NPS(M) x 1/4 NPS(M) NLA use 74-011/1 NPS(M) x 3/8 NPS(M) NLA use 74-012/1 NPS(M) x 3/8 NPS(M) NLA use 74-013/1 NPS/NPT Male x BSP/BSPT Male 74-062/1 74-063/1 1/4 NPT(M) x 1/4 BSP(M) 3/8 NPT(M) x 1/4 BSP (M) JIC Male x JIC Male 74-021/1 74-022/1 74-023/1 JIC 1/2 x 20(M) x JIC 1/2 x 20(M) JIC 1/2 x 20(M) x JIC 3/4 x 16(M) JIC 3/4 x 16(M) x JIC 3/4 x 16(M) Metric Male x Metric Male 74-031/1 74-031/30 ____ ____ M16 x 150(M) x M16 x 150(M) M16 x 150(M) x M16 x 150(M) stainless Metric Male x BSP Male 74-060/1 M16 x 150(M) x 1/4 BSP(M) Metric Male x NPS/NPT Male 74-061/1 74-064/1 ____ M16 x 150(M) x 1/4 NPT(M) M16 x 150(M) x 3/8 NPT(M) Couplings & Adaptors - Male x Female BSP Male x BSP Female 78-035/1 74-080/1 74-080/37 74-088/1 74-088/37 74-089/1 ____ 1/4" BSP (M) flat faced x 1/4 BSP(F) swivel zinc plated int hex drive 1/4 BSP(M) x 3/8 BSP(F) swivel nut 1/4 BSP(M) x 3/8 BSP(F) stainless black swivel nut 3/8 BSP(M) x 3/8 BSP(F) swivel nut 3/8 BSP(M) x 3/8 BSP(F) stainless black swiveling nut 1/4 BSP(M) x 1/4 BSP(F) swivel nut BSP Male x NPSM Female 74-085/1 74-086/1 74-087/1 74-087/37 ____ 1/4 3/8 1/4 1/4 BSP(M) BSP(M) BSP(M) BSP(M) x x x x 1/4 3/8 3/8 3/8 NPSM(F) NPSM(F) NPSM(F) NPSM(F) swivel nut swivel nut swivel nut stainless black swivel nut BSP Male x JIC Female 74-081/1 74-082/1 ____ 1/4 BSP(M) x JIC 1/2 x 20(F) swivel nut 3/8 BSP(M) x JIC 3/4 x 16(F) swivel nut BSP Male x Metric Female 74-083/1 74-083/37 74-084/1 74-095/37 74-199/1 ____ ____ 1/4 1/4 3/8 3/8 1/4 BSP(M) BSP(M) BSP(M) BSP(M) BSP(M) x x x x x M16 M16 M16 M22 M14 x x x x x 150(F) swivel nut 150(F) stainless black nut 150(F) swivel nut 150(F) stainless black nut 1(F) swivel nut NPS/NPT Male x NPS Female 74-032/1 74-033/1 74-034/1 74-036/1 74-037/1 74-038/1 74-039/1 74-040/1 74-040/37 1/4 3/8 3/8 3/8 3/8 1/2 1/4 1/4 1/4 NPS(M) x 1/4 NPSM(F) swivel nut NPS(M) x 1/4 NPSM(F) swivel nut NPS(M) x 3/8 NPSM(F) swivel nut NPT(M) x 1/4 NPSM(F) swivel nut NPT(M) x 1/2 NPSM(F) swivel nut NPT(M) x 1/2 NPSM(F) swivel nut NPT(M) x 1/4 NPSM(F) swivel nut NPS(M) x 3/8 NPSM(F) swivel nut NPS(M) x 3/8 NPSM(F) swivel nut stainless black nut NPT Male x BSP Female 74-035/1 74-045/1 74-046/1 74-047/1 74-048/1 ____ 3/8 1/4 3/8 3/8 1/4 NPT(M) NPT(M) NPT(M) NPT(M) NPT(M) x x x x x 1/4 1/4 3/8 3/8 3/8 BSP(F) swivel nut BSP(F) swivel nut BSP(F) swivel nut NPSM(F) swivel nut BSP(F) swivel nut NPT Male x JIC Female 74-041/1 74-042/1 ____ 1/4 NPT(M) x JIC 1/2 x 20(F) swivel nut 3/8 NPT(M) x JIC 3/4 x 16(F) swivel nut NPT Male x Metric Female 74-043/1 74-044/1 ____ ____ 1/4 NPT(M) x M16 x 150(F) swivel nut 3/8 NPT(M) x M16 x 150(F) swivel nut Couplings & Adaptors - Male x Female JIC Male x BSP Female 74-055/1 74-056/1 74-057/1 ____ JIC 1/2 x 20(M) x 1/4 BSP(F) swivel nut JIC 3/4 x 16(M) x 3/8 BSP(F) swivel nut JIC 1/2 x 20(M) x 3/8 BSP(F) swivel nut JIC Male x JIC Female 74-050/1 JIC 1/2 x 20(M) x JIC 3/4 x 16(F) swivel nut JIC Male x NPSM Female 74-051/1 74-052/1 74-058/1 ____ ____ JIC 1/2 x 20(M) x 1/4 NPSM(F) swivel nut JIC 3/4 x 16(M) x 3/8 NPSM(F) swivel nut JIC 1/2 x 20(M) x 3/8 NPS(F)nut JIC Male x Metric Female 74-053/1 74-054/1 ____ JIC 1/2 x 20(M) x M16 x150(F) swivel nut JIC 3/4 x 16(M) x M16 x 150(F) swivel nut Metric Male x Metric Female 74-070/1 M16 x 150(M) x M16 x 150(F) swivel nut Metric Male x BSP Female 74-075/1 74-076/1 74-198/1 ____ M16 x 150(M) x 1/4 BSP(F) swivel nut M16 x 150(M) x 3/8 BSP(F) swivel nut M14 x 1(M) x 1/4 BSP(F) swivel nut Metric Male x NPSM Female 74-071/1 74-072/1 ____ M16 x 150(M) x 1/4 NPSM(F) swivel nut M16 x 150(M) x 3/8 NPSM(F) swivel nut Metric Male x JIC Female 74-073/1 74-074/1 ____ M16 x 150(M) x JIC 1/2 x 20(F) swivel nut M16 x 150(M) x JIC 3/4 x 16(F) swivel nut Female x Female 74-151/1 74-152/1 74-153/1 74-161/1 74-162/1 74-163/1 Female Female Female Female Female Female union union union union union union 1/4 1/4 3/8 1/4 1/4 3/8 BSP(F) x 1/4 BSP(F) BSP(F) x 3/8 BSP(F) BSP(F) x 3/8 BSP(F) NPSM(F) x 1/4 NPSM(F) NPSM(F) x 3/8 NPSM(F) NPSM(F) x 3/8 NPSM(F) Elbows & Tees 78-036/30 78-048/30 3/8 BSP 90° heavy duty 90° elbow, st/steel. 2 x 3/8 BSP(F) 3/8 BSP Tee heavy duty 90° elbow, st/steel. 3 x 3/8 BSP(F) Plugs 74-311/1 74-313/1 74-315/1 Plug 1/4 NPT(M) Plug 3/8 NPT(M) Plug 1/2 NPT(M) Other variations may be possible. Please enquire Filter Housings & Screens Manifold Filters 36-400/12 Aluminium High Pressure Manifold Filter 400 Bar MWP incl filter. Please specify mesh (36 series/400 - page 27). 3/8 BSP inlet 1/4 BSP(M) outlet 36-301 PTFE gasket for 30-400 36-398/30 Stainless steel high pressure manifold filter 400 Bar MWP single filter 3/8 inlet, 2 x 3/8 BSP(F) outlets (accepts 36 series/400 - page 27) 36-399/30 Stainless Steel High Pressure Filter 400 Bar MWP Twin filters 1/2 BSP(M) inlet and outlet (includes filter, please specify mesh. (36 series/400 - page 27) Low Pressure Manifold Filter Assembly 36-300/30 78-217/30 Low Pressure Manifold Filter Assembly, 100 Bar MWP Stainless steel. Accepts 36 series/400 filter screens. 3/8 BSP inlet/outlet (F) (includes filter, please specify mesh (36 series/400 - page 27) Low Pressure Inline Filter Assembly, 100 bar MWP. Stainless steel. Accepts 36 series/400 filter screens. 3/8 BSP inlet/outlet (inline) (includes filter, please specify mesh (36 series/400 - page 27) Filter Housings & Screens Conventional Pressure Filters * * * * Fully stainless steel or delrin to choice. Illustrations 36-750/20 delrin & 36-750/30 stainless steel (304) 3/8 BSP cone seat, male inlet, 3/8 BSP cone seat female outlet. Accepts 36 series/700 series filters. (colour coded, mesh range from 20 to 300 micron) Lightweight - only 72g (stainless steel) & 25g (delrin) TYPE REF 36-750/30 36-750/20 36-751/20 36-760-K50 36-761-K50 36-762-K50 36-763-K50 36-764-K50 36-765-K50 DESCRIPTION SCREEN Filter housing 3/8BSP c/w 300 micron screen (36-760) st/st Filter housing 3/8BSP c/w 300 micron screen (36-760) delrin Filter housing 1/4BSP c/w 300 micron screen (36-760) delrin * * * * * * Pack Pack Pack Pack Pack Pack of of of of of of 50 50 50 50 50 50 white elements blue elements red elements green elements orange elements brown elements 300 micron 112 micron 80 micron 60 micron 30 micron 20 micron 36 series/700 filter screens 36-750/30 NB: Plastic Filter Housings are non-conductive 36-750/20 78-111/34 78-111/34 Quick release filter housing (Non shut off) 36-501 Conventional Suction Gun Filters 36-501-K10 * Suction filter Nylon 80 mesh 18 x 37mm (blue) 36-501-K100 * Suction filter Nylon 80 mesh 18 x 37mm (blue) 36-508-K10 * Suction filter 80 mesh sts screen 18 x 37mm (white) 36-508-K100 * Suction filter 80 mesh sts screen 18 x 37mm (white) All above to fit suction tube 6.5 - 8mm diameter Pack Pack Pack Pack 10 100 10 100 36-512-K10 * Suction filter 36-512-K100 * Suction filter 36-515-K10 * Suction filter 36-521-K10 * Suction filter 36-521-K100 * Suction filter All above to fit suction tube 8 Pack Pack Pack Pack Pack 10 100 10 10 100 Nylon 100 mesh 28 x 42mm (yellow) Nylon 100 mesh 28 x 42mm (yellow) Nylon 165 mesh 28 x 42mm (red) 100 mesh sts screen 28 x 42mm (white) 100 mesh sts screen 28 x 42mm (white) - 10mm diameter 36-508 Conventional Gravity Gun Filters 36-531-K10 * Gravity filter Nylon 80 mesh (small blue) Pack 10 36-531 Filter Housings & Screens Manifold Filter Screens 36 SERIES/400 36-401/34 36-403/34 36-406/34 36-410/34 36-415/34 36-420/34 36-430/34 36-440/34 * * * * * * * * 36 SERIES/600 36-603 36-604 36-605 36-606 36-609 36-612 36-615 36-620 36-359/30 ** * * * * * * * 36 SERIES/100 36-103/34 36-105/34 36-107/34 36-110/34 36-115/34 36-120/34 * * * * * * MANIFOLD FILTER SCREENS FIT 36-300, 36-400, AND 36-401 PRESSURE FILTERS AND 36-45X SERIES SUCTION FILTER HOUSINGS & ARE INTERCHANGEABLE WITH GRACO Manifold Filter 15 mesh screen Manifold Filter 30 mesh screen Manifold Filter 60 mesh screen Manifold Filter 100 mesh screen Manifold Filter 150 mesh screen Manifold Filter 200 mesh screen Manifold Filter 300 mesh screen Manifold Filter 400 mesh screen MANIFOLD FILTER SCREENS ST/STEEL PRESSURE FILTERS FITS KREMLIN, WAGNER, BöLLHOFF & OTHERS. DIA 27mm LENGTH 114mm Manifold filter Screen size No. 3 (0.08mm) 200 mesh Manifold filter Screen size No. 4 (0.09mm) 165 mesh Manifold filter Screen size No. 5 (0.14mm) 120 mesh Manifold filter Screen size No. 6 (0.19mm) 86 mesh Manifold filter Screen size No .9 (0.24mm) 66 mesh Manifold filter Screen size No.12 (0.32mm) 50 mesh Manifold filter Screen size No.15 (0.41mm) 40 mesh Manifold filter Screen size No.20 (0.53mm) 30 mesh Support spring for all of the above MANIFOLD FILTER SCREENS ST/STEEL PRESSURE FILTER COLOUR CODED FITS WIWA & HUBNER Fluid filter Nylon Core Blue 30 mesh Fluid filter Nylon Core Orange 50 mesh Fluid filter Nylon Core Yellow 70 mesh Fluid filter Nylon Core Black 100 mesh Fluid filter Nylon Core Red 150 mesh Fluid filter Nylon Core White 200 mesh In Line Filter Screens FITS KREMLIN Ø9.5mm L 17.0mm 36-1050-K10 * Filter Screen Stainless Steel 36-1051-K10 * Filter Screen Stainless Steel 36-1052-K10 * Filter Screen Stainless Steel Pk 10 Pk 10 Pk 10 50 mesh 100 mesh 200 mesh Low Pressure Filter For pressure 78-350 78-351 78-352 feed application Stainless steel, 3/8 BSP(F) swivel nut inlet. 3/8 BSP(M) outlet 20 BAR MWP 60 mesh cone filter element (single) (white) 100 mesh cone filter element (single) (yellow) Filter Housings & Screens Suction Filter Assemblies TYPE REF 36-450/42 36-452/42 36-453/41 36-454/42 36-455/42 36-460/20 DESCRIPTION Suction Filter Assembly Nylon Housing 1” NPSM(F) Green Suction Filter Assembly Nylon Housing 3/4 NPSM(F) Orange Suction Filter Assembly Nylon Housing 1/2 NPSM(F) Black Suction Filter Assembly Nylon Housing 28x1.5mm(F) Blue Suction Filter Assembly Nylon Housing 15x1mm Red Seal for above filter assemblies Above housings exclude 36 series/400 screen – see page 20 Suction Filter - Bell Type 311000 312000 314000 315000 306055 306105 313000 Paint suction BELL kit -(F) M15x1 - 30 and 50 mesh disc filters Paint suction BELL kit -(F)1/2” - 30 and 50 mesh disc filters Cap (F) M15x1 only Cap (F) 1/2” only Disc filter 30 ME nylon (pack 10) Disc filter 50 ME nylon (pack 10) Stainless steel spring Suction Filter - Barrel Type 316000 317000 307030 307060 320000 321000 322000 323000 324000 Paint mini suction filter 30 mesh - (F) 28 x 1.5 Paint mini suction filter 60 mesh - (F) 28 x 1.5 30 mesh Mini filter net (without base) 60 mesh Mini filter net (without base) Adaptor (M) 28x1,5 x (F) 15x1 for siphon hose Base adaptor (M) 28x1,5 x (F) 3/8” for siphon hose Base adaptor (M) 28x1,5 x (F) 1/2” for siphon hose Base adaptor (M) 28x1,5 x (F) 3/4” for siphon hose Base adaptor (M) 28x1,5 x (F) 1” for siphon hose Disposable Spraybooth Filter Paper For dry spray booths, white faced, pleated perforated cardboard filters, superior quality construction with strapping to ensure correct fitting and spacing. Up to 98% efficiency. Made in UK. Height 0.9m (36”), Length 9.24m (30ft). Packed in threes. Quantity 1 pack of three 6 packs of three plus 12 packs of three plus 1 pallet (50 filters) 6 packs and more are supplied carriage free. Other types including high efficiency filters by enquiry. Filter Housings & Screens TYPE REF DESCRIPTION In-line Filters 36-UK-1 Interline Strainer Assembly Includes filter (specify) 1/4 NPSM both ends As above but 1/4” to 3/8” NPSM both ends As above but 3/8” to 3/8” NPSM both ends 36-UK-2 36-UK-3 Gun Handle Filters 36-030-K10 36-060-K10 36-100-K10 36-150-K10 36-200-K10 * * * * * Gun Gun Gun Gun Gun Filter Filter Filter Filter Filter 30 mesh green 60 mesh white 100 mesh yellow 150 mesh blue 200 mesh red Pack Pack Pack Pack Pack of of of of of 10 10 10 10 10 Pack Pack Pack Pack of of of of 10 10 10 10 AAA Gun Handle Filters fits Optima 35-030-K10 35-050-K10 35-100-K10 35-180-K10 * * * * Gun Gun Gun Gun Filter Filter Filter Filter 50 mesh green 80 mesh white 150 mesh yellow 300 mesh red High Pressure Disc Tip Swivel Filters High Pressure Swivel With Inline Filter Assembly (incl. filter) Disc Filter to be specified 36-005 or 36-009 71-110/2 1/4 BSP(M) x 1/4 BSP(F) 400 Bar WMP 71-220/2 1/4 NPS(M) x 1/4 NPSM(F) 400 Bar MWP 71-410/2 3/8 BSP(M ) x 1/4 BSP(F) 400 Bar MWP 71-420/2 3/8 BSP(M) x 1/4 NPSM(F) 400 Bar MWP 71-450/2 3/8 BSP(M) x 3/8 NPS(F) 400 Bar MWP 71-480/2 3/8 BSP(M) x M16 x 150(F) 400 Bar MWP 71-880/2 M16x150 (M) xM16x150 (F) 400 Bar MWP Disc Tip Filter Units TYPE REF 72-110/2 72-220/2 72-440/2 72-520/2 72-880/2 DESCRIPTION 1/4BSP(M) x 1/4 BSP(F) 1/4 NPS(M) x 1/4 NPSM(F) 3/8 BSP(M) x 3/8 BSP(F) 3/8 NPS(M) x 1/4 NPSM(F) M16 x 150(M) x M16 x 150(F) Incl. Incl. Incl. Incl. Incl. filter, filter, filter, filter, filter, Disc Tip Filter Screens 36-020-K10 36-009-K10 36-005-K10 36-003-K10 * * * * Pack Pack Pack Pack of of of of 10 10 10 10 disc disc disc disc tip tip tip tip filter filter filter filter 30 mesh 60 mesh 100 mesh 200 mesh specify specify specify specify specify Fluid Control TYPE REF DESCRIPTION Back Pressure Valve (High Pressure) 78-203/34 High Pressure Back pressure valve 345 Bar MWP for hot spray or recirculating systems. Stainless steel 3/8 BSP F inlet 2 x 3/8 BSP F outlets 78-203/34 Back Pressure Valves (Low Pressure) 78-207/34 Low Pressure Back pressure regulating valve for circulating systems. Stainless steel wetted section 0-10 Bar 1/2 BSP (F) inlet/outlet 1/4 F gauge port 78-227/34 Low Pressure Back pressure regulating valve for larger circulating systems. Stainless steel wetted section 0-10 Bar 1 BSP (F) inlet/outlet 1/4 BSP F gauge port 78-207/34 78-227/34 Fluid Regulators (Low Pressure) 78-204/34 Low pressure fluid regulator diaphragm operated 1/4 BSP in & out fitted gauge 0-10 Bar range outlet pressure (stainless wetted parts) 78-224/34 Fluid regulator higher output diaphragm controlled 3/8 BSP inlet & outlet not incl. gauge. stainless steel wetted 1/4 BSP(F) gauge port 78-225/34 As above but air operated. Not illustrated 78-204/34 Fluid Regulators (High Pressure) High pressure paint regulator providing accurate fluid pressure control. 304 stainless steel wetted section. Please specify range required. 7030/1 7030/2 7030/2 78-224/34 0-69 Bar (red spring) 70-140 Bar (white spring) 110-250 Bar (gold spring) 21/0011091/101 21/0011093/102 21/0011092/096 Regulator spring 70-140 Bar Regulator spring 1-69 Bar Regulator spring 110-250 Bar 7030/x 78-01430 High pressure paint and/or mastic regulator providing accurate fluid pressure control. Made in aluminiumwith range 70-445 BAR. 3/8 BSPF inlet and outlet 78-214/30 Fluid Control Pulsation Chambers 16500-225 Plastic pulsation chamber with gauge, 8 Bar MWP inlet 1/2 BSP 22-001-000-00 Stainless steel wetted pulsation dampener with compressed air controlled diaphragm. Fluid inlet 1 BSP F. Air inlet 3/8 BSPF. suits pumps with output ref to 35 litres per minute. Complete with check valve and gauge. 22-008-000-00 Stainless steel wetted pulsation dampener with compressed air controlled diaphragm for larger circulating systems. Fluid inlet 11/4 BSP F. Air inlet 3/8 BSPF. Suits pumps with output upto 76 litres per minute. Complete with check valve and gauge. MWP 21bar WT35kg 22-007-000-01 Stainless steel pulsation bottle suit low or high pressure (up to 345 Bar) can accept filter. Inlet 1/2 BSP M, outlet 1/2 BSP F (Price excluding filter) (Price with filter) 20-017-000-01 Low pressure fluid regulator for use with higher output applications 1’’ inlet and outlet. Stainless steel with easy access to lower valve assembly. Fluid Control TYPE REF DESCRIPTION Needle Valves 78-200/34 1/4” needle shut off valve 2 x 1/4 BSP F inlets Stainless steel 6000 PSI MWP 78-201/34 3/8” needle shut off valve 2 x 3/8 BSP F inlets Stainless steel 6000 PSI MWP 78-202/34 1/2” needle shut off valve 2 x 1/2 BSP F inlets Stainless steel 6000 PSI MWP Ball Valves 78-205/4 High pressure ball valve 400 Bar MWP 1/4 BSP F x 1/4 BSP F 78-205/34 High pressure ball valve 400 Bar MWP 1/4 BSP F x 1/4 BSP F stainless steel 78-206/4 High pressure ball valve 400 Bar MWP 3/8 BSP F x 3/8 BSP F 78-218/4 High pressure 3 way L ported ball valve 400 Bar MWP 3 x 3/8 BSP(F) 78-208/15 78-209/15 78-215/15 78-216/15 LP LP LP LP 78-323/30 LP ball valve 1/4 BSP (M). Flat face x 1/4 BSP (M). Cone face, PTFE seals, stainless steel 78-324/30 LP ball valve 3/8 BSP (M). Flat face x 3/8 BSP (M). Cone face, PTFE seals, stainless steel ball ball ball ball valve valve valve valve 78-205/34 1/4” F swivel nut 1/4 BSP (M). Brass nickel plated 1/4 FBE. Brass nickel plated 3/8 MBE. Brass nickel plated 3/8 FBE. Brass nickel plated Quick Detach Fluid Couplings Quick Detach Low Pressure Hi-Flo Fluid Couplings Fully stainless steel, easy to operate, high flow rate, stems & couplings available separately seal kits available 78-311/34 Fluid QD connection - new design featuring hexagon body 78-312/34 New design stem for above featuring loose nut 32 Fax order line: 0800 195 7965 78-312/34 78-311/34 Fluid Control Pump Overrun Shut Off Valve Model B-013952 1/2 BSP ported with manual (low force) start button suitable for frequent use. ATE approved Designed to control pumps operating in unmanned locations, such as paint mix rooms, which can suffer from failures or leaks causing rapid dissipation of paint or solvent contents from the supply drums, causing financial loss, a big clean up and fire hazard. Fit an overrun valve and avoid these problems, all models feature sessitivity control as standard. Audio and visual indicators also available by enquiry Fax order line: 0800 195 7965 33 Accessories TYPE REF 52002 78-090/30 78-101/30 DESCRIPTION Five litre black gravity bucket c/w lid. 1” BSP(F) outlet U pipe. Stainless steel M36(F) 1” BSP(M) U pipe. Stainless steel 1” BSP(F) x 1” BSP(M) Viscosity Cups VIS-F4-K2 Pack of 2 handy plastic Ford 4 viscosity cups with metal orifice Ford 4 VIS-F4-K2 Gauges & Gauge Manifolds 580-202 580-203 580-220 Gauge manifold M16 F x M16 M Gauge manifold 1/4 BSP F x 1/4 BSP M Riser for gauge 1/4 BSP 580-203 580-202 & 580-211 Dry gauges 63mm dia 580-215 Dry, 0-160psi 1/4 BSP bottom inlet, glass window. 63mm dia 580-217 Dry, 0-30psi 1/4 BSP bottom inlet, polycarbonate window 63mm diameter 580-218 Dry, 0-6Bar 1/4 BSP bottom inlet, polycarbonate window63mm diameter 580-219 Diaphragm controlled gauge in st/steel. Glycerine filled, st/steel case Plexiglass window, 0-160 psi 1/4 BSP bottom inlet ideal for circulating systems. 580-219 Glycerine filled gauges 63mm dia Plexiglass, stainless body 580-211 1/4 BSP bottom inlet 400Bar 580-212 1/4 BSP bottom inlet 3000psi 580-213 1/4 BSP bottom inlet 100psi 580-214 1/4 BSP back inlet 3000psi for panel mounting c/w bracket 580-216 1/4 BSP bottom inlet 2000psi 580-221 1/4 BSP bottom inlet 0-30psi Cleaning Brushes 24097-R-K10 Cleaning brushes, nylon bristles (pack of 10) 24097-R-K10 Accessories Aluminiun Non Restrictor Models TYPE REF 74-911/27 74-922/27 74-941/27 * 74-944/27 * 74-952/27 74-981/27 74-988/27 2 INLETS 1/4 BSP(M) 1/4 NPS(M) 1/4 BPS(M) 3/8 BSP(M) 1/4 NPS(M) 1/4 BSP(M) M16 x 1.5(M) 1 OUTLET 1/4 BSP(F) 1/4 NPS(F) 3/8 BSP(F) 3/8 BSP(F) 3/8 NPS(F) M16 x 1.5(F) M16 x 1.5(F) Low Pressure Aluminiun Restrictor Models TYPE REF 74-711/27 74-722/27 74-741/27 * 74-744/27 * 74-752/27 74-781/27 74-788/27 2 INLETS 1/4 BSP(M) 1/4 NPS(M) 1/4 BSP(M) 3/8 BSP(M) 1/4 NPS(M) 1/4 BSP(M) M16 x 1.5(M) 1 OUTLET 1/4 BSP(F) 1/4 NPS(F) 3/8 BSP(F) 3/8 BSP(F) 3/8 NPS(F) M16 x 1.5(F) M16 x 1.5(F) Non Restrictor Models Stainless steel Low Pressure Stainless Restrictor Models TYPE REF 74-811/30 74-822/30 74-841/30 74-844/30 74-852/30 74-855/30 74-888/30 TYPE REF 74-511/30 74-522/30 74-541/30 74-544/30 74-552/30 74-555/30 74-588/30 2 INLETS 1/4 BSP(M) 1/4 NPS(M) 1/4 BSP(M) 3/8 BSP(M) 1/4 NPS(M) 3/8 NPS(M) M16 x 1.5(M) 1 OUTLET 1/4 BSP(F) 1/4 NPS(F) * 3/8 BSP(F) 3/8 BSP(F) 3/8 NPS(F) 3/8 NPS(F) M16 x 1.5(F) * * Stock lines others to order LP Y Blocks 74-330 LP 2 outlet air connector Y with ball valves 1/4 BSP(F) x 2 x 1/4 BSP(M) 74-301.4 LP 3 outlet fluid Y connection, swivel nut 3/8 BSP(F)x3 x 3/8 BSP fixed incl 1 x 3/8 BSP plug 2 INLETS 1/4 BSP(M) 1/4 NPS(M) 1/4 BSP(M) 3/8 BSP(M) 1/4 NPS(M) 3/8 NPS(M) M16 x 1.5(M) 1 OUTLET 1/4 BSP(F) 1/4 NPS(F) 3/8 BSP(F) * 3/8 BSP(F) 3/8 NPS(F) 3/8 NPS(F) M16 x 1.5(F) Agitators PM60 Pneumatic agitator is perfect for preparation and mixing of most paints in containers of 5 and 10 litre capacity. Some materials, such as lacquer may also be agitated in larger volume containers. Standard Features • Comfortable handle • Can be hand-held/flange mounted or on 60-100 stand • Light weight • High quality function • Stainless steel shaft & propeller • Long service life • Integral speed control & silencer PM60 Technical Data • Air pressure for operation 0.5 to 8Bar • Speed @ 4 Bar = 900RPM • Air consumption = 100L/min • Output = 60 Watts • Weight (excluding stand) = 1.10kg • Shaft length = 440mm • Propeller diameter = 70mm Agitator Assy 60-200 flange mounting connection also available PM60 pictured on adjustable height stand (60-100) 60-200 mounting 60-100 stand MRM-050 Features a 0.42HP direct drive air motor for greater mixing ability either for heavier materials or in larger quantities up to 25 litre capacity. Standard Features • Comfortable T-bar handle grip • Light weight • High quality function • Long service life • Integral speed control & silencer MRM 050 80mm Technical Data • Operating air pressure 0.5 to 5.6Bar • Speed @ 5.6 Bar = 6,000RPM • Air consumption = 12.5CMF @ 5.6Bar • Output = 0.33kW • Weight (excluding stand) = 2.0kg • Shaft length = 500mm • Spiral paddel diameter = 80mm Agitator Assy Spiral Paddle Assy 80mm spiral paddle For preparation and mixing of liquid materials 200 litre (45 gallon) air driven paint mixer mounted on stainless steel lid. Standard Features • Two handles • 1.5 Hp motor • Four fixing positions around outside edge • Stainless steel lid • Stainless steel shaft • Adjustable paddle detail A choice of rotary impellor blades are available 60-615 55mm Ø 60-614 110mm Ø 200 Ltr agitator assy mounted on stainless steel lid assy Mixing Tanks PM60 -250 The 60-250 package makes the preparation and use of spray applied materials simple and clean to handle whilst at the same time helps to ensure that your material achieves and remains at the correct specification - ready for use It comprises a standard industrial 25 litre pail with stainless steel lid, which fastens to the pail using three external fixings. The lid itself is spun and laser profiled has a filler/viewer point with pear shaped access plate, a 1/2BSP male connection fluid suction tube (reaching the bottom of the pail) and a PM-60 pneumatic mixer. Standard Features • Light weight • High quality function • Stainless steel shaft & propeller • Long service life • Integral speed control & silencer PM60-250 Technical Data • Air pressure for operation 0.5 to 8Bar • Speed @ 4 Bar = 900RPM • Air consumption = 100L/min • Output = 60 Watts • Weight (excluding stand) = 1.10kg • Standard shaft length = 440mm • Propeller diameter = 70mm Pail mounted Agitator Assy Exitflex now design manufacture and supply stainless steel mixing tanks to meet your exact specifications. Supplied with pneumatic operation mixers, filers/viewers, bottom outlet ball valve connections. Please alow us the opportunity to quote against your mixing vessel requirements. 100 litre model 45 litre model Pressure Feed Equipment 1/3 is enough for us... You will discover the ingenious simplicity when you maintain the pump. We use approximatley 1/3 the number of parts that our competitors use to build similar sized pumps. Exitflex are pleased to offer an extensive range of double diaphragum pumps for transfer duty 1. Flexible installations The connections may be rotated 180°. Simply turn the connections to fit your piping system.Threaded BSP or NPT connections is standard. Twin connectons are also avaiable 2 2. Powerful valve seats The valve seat is under constant stress from the movement of the valve ball. To obtain best wear resistance, the integrated seat is made from AISI 316 stainles steel. 3 3. Low air consumption The air distribution system is designed with shortest possible air distribution ways. This eliminates “dead spaces”, resulting in high effiencey and low air consumption. 1 Typical applications Industry Example of applications Workshop Oil, fat, solvents, water, cooling fluid, lubricants Print & paint Glue, additives, varnish, ink, paint, latex, acid, resins, pigments Mining & Construction Adhesives, sump, dewatering, coal, sludge, pastes Ceramic Industry Abrasives, glaze, water, enamels, clay Chemistry Acids, alkalis, alcohol, solvents, latex, emulsions EPT2.5 • • • • • • • • Quick release lid clamp, saving time and reducing build up of materials Carrying handle/hook Suitable for conventional and HVLP applications Lid mounted pressure release valve Greater manoeuvrability abtained by operative compared with suction / gravity fed systems 5 Bar (70psi) maximum working pressure 3/8 BSP male fluid outlet connection 1/4 BSP male air inlet connection With a 2.5 litre cup and a maximum working pressure of 5 Bar the EPT2.5 reduces the need for repetitive cup filling and allows the spraying of lighter viscosity materials compared with cup guns. ETP2.5 ETP2.5K Cup Assy (no hoses) Cup Assy c/w 4ft hose Please telephone we will be pleased to offer a quotation to match your specification. Pressure Feed Equipment Durable construction pressure vessels supplied ready for use, with high quality valves, regulators and gauges there is a choice of manual or pneumatic mixing units. 10 litre MODEL ETP10 ETP10M ETP10A ETP10B AGITATOR TYPE None Manual Pneumatic None - bottom outlet Stainless steel version available 20 litre MODEL EPT20A EPT20M AGITATOR TYPE Pneumatic Manual Stainless steel version available Other sizes by enquiry NB. All 10 litre models feature an aluminium inner liner as standard - stainless steel also available (see below). A comprehensive stock of spare parts is available. Key components are:MODEL PTP103 PTP118 PTP119 PTP112 PTP126 PTP123 AGITATOR TYPE 10 litre lid gasket 10 litre aluminium liner 10 litre stainles steel liner 10 or 20 litre pressure gauge 10 or 20 litre pressure regulator 20 litre lid gasket Pre-Treatment Nozzles Pre-Treatment Non Corrosive CPVC Pipework Systems Designed For Your Application Pre-Treatment Nozzles MK I Adjustable Assemblies – Standard Poly Glass Material to suit 1, 1 1/2 & 2 inch nominal bore I.P.S. Pipe. Available with 14mm, 17mm and 19mm spigots to allow retrofitting to most existing installations Now available with the new Quick release tips to further reduce maintenance and down time! Standard 302 spring Single Spring Version (for spraying pressures up to 4.0 Bar) MK1 assembly complete with Quick release V Tip MK1 assembly complete with V JET tip MK1 assembly complete with HOLLOW CONE tip MK1 assembly complete with THREADED BALL tip MK1 assembly complete with FULL CONE tip Double Spring Version MK1 assembly complete MK1 assembly complete MK1 assembly complete MK1 assembly complete MK1 assembly complete (for spraying pressures greater than 4.0 Bar) with Quick release V Tip with V JET tip with HOLLOW CONE tip with THREADED BALL tip with FULL CONE tip MK II Fixed Nozzle Holders – Standard Poly Glass Material to suit 1, 1 1/2 & 2 inch nominal bore I.P.S. Pipe. Female threaded bodies 1/8, 1/4, 3/8 & 1/2 BSP & NPT Standard 302 spring Single Spring Version £2.80MKII Single spring Double Spring Version MKII Double spring Replacement Tips to suit all Mkl nozzle holders in Polyglass material Replacement Quick release Ball and V Tip Replacement Quick release V Tip only V jet Tip Hollow Cone Tip Threaded Ball Tip Threaded Tip Full Cone Tip Spares for MKI & MKII assemblies in polyglass material O ring seal (MKI & MKII) Locking Cap (MKI) Body (MKI) Body (MKII) Single spring 302SS (MKI & MKII) Double spring 302SS (MKI & MKII) Mkl assembly less tip Single Clamp Mkl assembly less tip & locking cap Single Clamp Not ours Not ours Air Fed Breathing Apparatus Exitflex are pleased to offer a comprehensive range of air fed respiratory equipment for operators in the many working environments where airborne contaminants continue to threaten sight, breathing and general health. The system is CE marked and approved to EN270 and EN 139. This system continues to be very popular with paint sprayers, especially those working with two-pack paints containing isocyanates, due to the practical, lightweight and comfortable design but most of all, the performance of the apparatus. • • • • • Complete kits or component parts Choice of full visor or half mask High capacity coalescing air filter Belt with pre-set regulator and air purifier Choice of optional air hoses A choice of kits is available to suit a range of Application requirements. The waist belt features an activated carbon cartridge filter to remove airborne vapours and odours, a pre-set regulator, which controls the volume and quality of air to the visor and an air flow indicator for operator protection. • • • • • Air quality to BS4275 at belt Colour changing activated carbon cartridge Comfortable adjustable belt Clear flow indicator gauge Quick replacement at low cost The 50-612 kit (shown above left) is the most comprehensive i.e for a new installation. These portable filtration units are especially suited to mobile operators or to personnel who are responsible for their equipment. The 50-515 twin filter contains a pre-filter and a coalescing filter in a convenient portable frame. The 50-516 triple has an activated carbon filter in addition to the pre-filter and coalescing filter. All units have a semi automatic drain with an air flow capacity up to 28cfm at 90psi. Maximum temperature. 40ºC. Maximum input 150psi. NB Wall mounted versions are listed on page 45. NB These filters will not remove carbon monoxide or other toxic gases. Air Fed Breathing Apparatus TYPE REF DESCRIPTION Respiratory Visors / Half Masks & Complete Outfits 50-511 50-513 50-521 50-611 50-621 50-612 * * * * * * 50-612/M * Air fed visor (Acetate) Waistbelt with filter, regulator and flow indicator gauge Air fed half mask (excluding goggles) Air fed outfit incl. 50-511 visor, 50-513 belt and visor covers Air fed outfit incl. 50-521 half mask, 50-513 belt and 50-407 QD Air fed outfit incl. 50-511 visor, 50-513 belt, 50-413-K10 visor covers, 50-406 gun hose, 50-505 10 metre supply hose & 50-514 coalescer Air fed outfit incl. 50-511 visor, 50-513 belt, 50-413-K10 visor covers, 50-406 gun hose, 50-505 10 metre supply hose. (as 50-612 without coalescing filter) 50-511 50-513 50-521 Spare Parts and Accessories 50-406 50-411 50-412 50-413-K10 50-421 50-422 50-423 50-428 50-429 50-505 50-507 4ft gunsupply hose with 1/4 BSP Y x QD connection & 1/4 BSP(f) stem Replacement foam seal 50-511 Replacement air supply tube 50-511 Peel off visor covers pack of 10 Replacement screen (Acetate) for 50-511 Sweat band, Brow guard Flow indicator gauge for waistbelt Side wall mounting kit (mod 112) Jointing kit (mod 112) 10 metre supply hose with 1/2“ male QDx QD with 1/4 BSP(F) stem Y connector 50-406 50-413-K10 50-423 50-505 Respiratory Filters & Elements 50-404 50-514 50-415 50-430 50-424 50-425 50-426 50-515 50-515/W 50-516 50-516/W Replacement odour removal cartridge Coalescing filter (complete) 1/2” ported (mod112) Coalescing filter element for 50-514 Carbon filter (complete) 1/2“ ported (mod112) Replacement carbon filter element for 50-430 & triple filter units) Replacement pre-filter element (for twin or triple filter units) Replacement pre-filter unit (for twin or triple filter units) Portable twin filter unit. Prefilter & coalescing filter (Mod 112) mounted in portable frame. Wall mountable twin filter unit. Prefilter & coalescing filter (Mod 112) supplied with wall mounting kit. Portable triple filter unit. Prefilter, coalescing filter & activated carbon filter (Mod 112) mounted in portable frame. Wall mountable triple filter unit. Prefilter, coalescing filter, activated carbon filter (Mod 112) supplied with wall mounting kit. 50-430 50-404 50-425 50-424 50-516 50-515 Conventional Air Atomising Spray Lances EXITFLEX ‘38’ Series Airspray Gun Lances do not feature needles and thus require a different technique in use. In practice, they provide a positive affordable solution to users where a slim, lightweight extension is required for paint spray or wax application into difficult to reach areas inside tubes or confined spaces The Lances are 3mm thick wall aluminium tubing as also used with the EXITFLEX airless spray extension items, this makes it easy for you to stock for air spray or airless spray applications. It is important to note that the atomisers detailed in this section are for use in air spray applications only, they are not suitable for airless Some liquids may not be suitable for use with these atomisers. It is important to use separate air and fluid control regulators. Pressure feed guns should normally feature a 1.4mm fluid tip, or a 1.8mm fluid tip. Extensions will only operate with pressure feed. TYPE REF 38-441 38-451 38-452 38-411 38-438 38-421 38-431 38-471 DESCRIPTION Fogging chamber to fit BRPHVLP gun (page 45) Fogging chamber to fit Iwata W90 Fogging chamber to fit Iwata W200 Fogging chamber to fit DeVilbiss, Sagola (not HVLP) Fogging chamber to fit DeVilbiss, Compact Gun Fogging chamber to fit Binks 230 Fogging chamber to fit Binks BBR Fogging chamber (air assisted airless)to fit AAG-2000, GRACO AA 2000, ALPHA PLUS & AA PLUS 74-021 Adaptor for use with Flexi, 1/2” JIC M x 1/2” JIC M 38-002 Adaptor 1/2” JIC M 1/4” UNF F for use in rigid extensions 38-210 Spinning atomiser, forward, backward and side spray 1/4” UNF 38-220 Spinning atomiser, side spray only 1/4” UNF 38-230 Fixed atomiser for use with flexi lance 32-306/16 Lance 6” length rigid 32-312/16 Lance 12” length rigid 32-318/16 Lance 18” length rigid 32-324/16 Lance 24” length rigid 32-336/16 Lance 36” length rigid A complete extension comprises 1 Fogging chamber, 1 Lance (length to suit) 1 38-002 adaptor plus/antomiser of your choice. These extensions require a pressure feed system. 38-220 38-002 38-210 38-230 Flexible Extensions PA131J230 Flexi lance 1 metre including 38-230 fixed atomiser (excl. fogging chamber) Flexible extensions are available using the 38-219 or 220 spinning atomiser with 1/4 bore nylon hose. Prices by enquiry Slimline Extensions 38-500 Slimline extension tube only not including nozzle. Accepts 38-210 or 38-220 order fogging chamber extra to suit. Nickel plated finish 18” long, 11mm OD 38-501 Slimline angled fixed fan atomiser complete with fogging chamber to suit and choice of 6”, 12” or 18” length. 11mm OD It is important to ensure a balanced air and fluid pressure “at the spray gun”. To assist in achieving this it is advisable to use a mini air regulator - or filter regulator please see page 9. PA131J230 Standard 12” extension for DeVilbiss JGA/GTi spray gun with forward, backward & side spray 360° atomiser nozzle. Air Spray Guns TYPE REF DESCRIPTION BRP HVLP Pressure feed. 19710 19712 19714 19715 19717 19719 19722 BRP HVLP spray gun fitted with VOW type twin hose & stainless steel 76 series reusable connections (page 6) BRP HVLP Manual spray gun @ 1.0mm Pressure feed @ 1.2 Pressure feed @ 1.4 Pressure feed @ 1.5 Pressure feed @ 1.7 Pressure feed @ 1.9 Pressure feed @ 2.2 BRP HVLP Spares 202XX Needle, fluid tip & air cap kit(replace XX with Ø) 1825XA Air cap (state size ie, 0.8mm - 2.2mm) 18345A Seals and springs repair kit 1828XA Fluid tip (state size ie 0.8mm) 1625XA Fluid needle (state size ie 0.8mm) 24097-R-K10 Pack 10 cleaning brushes 10638A 1000cc Camlock Suction Cup HVLP Automatic Spray Gun (Low Pressure) K99 Automatic HVLP spray gun. Stainless steel version with recirculation base. Sizes 0.7 – 2.2mm (please specify) K99 Turbine Spray Gun TPQ-98 HVLP turbine gun. High quality, non bleed TPQ-98 30130 Air Blow Guns 30100 30130 Airblow gun with aluminium body Airblow gun with booster nozzle. Aluminium body 30100 DG-10-EK Cleaning Gun DG-10-EK Manual cleaning gun, syphons from separate container adjustable output 1/4 BSP air outlet Gravity spraygun E-70 Heavy material spray gun 4mm nozzle. One litre aluminium gravity cup. 1/4 BSP air inlet E-70 BIG INDUSTRIAL WIPES PROFESSIONAL BIW-640 Tray of 8 tubs of 80 wipes General Consumables GW30BK Textile overbraid sleeving (Polyester) 25-30mm GW40GR Textile overbraid sleeving (Polyester) 40-60mm PVCT 2/400 PVC sleeve 2” (50mm) approx 200m roll PVCT 3/400 PVC sleeve 3” (75mm) approx 200m roll 000000 DCL-K50 DCM-K50 N40-K50 UVC-K10 UVC-K50 Spray gun lubricant Suitable for lubricating spray guns, pumps etc. This is a non silicone oil for safe use with spray equipment 50ml bottle with nozzle Coveralls - pack size 50 Superior non-woven cloth like fabric, soft yet strong. • Water repellent • Abrasion resistant - low lint • Elasticated wrist, ankle and hood • Reusable • Zippered front Large Medium Green disposable Gloves - pack size 50 Latex, abrasive resistant gloves, offering protection for the hands, suitable for use with paints and inks. Not suitable for continuous immersion in aggressive solvents. Universal visor covers to suit square or round edge visors Pack 10 Pack 50 Top Quality Best Results ® Spray painting has evolved changing tip sizes - with a twist Airless ONE TIP TWO ANGLES! Air Assisted Airless Save Time • Paint • Energy • Money Top Quality Best Results ® For Airless and Air Assisted Airless spray guns POPULAR SIZES Wide angles/narrow angles eg.40/20º etc. Orifice size Ins 0.010´´ 0.012´´ 0.014´´ 0.016´´ 0.018´´ 0.020´´ mm 0.25 0.30 0.35 0.40 0.45 0.50 40º 40/20º 40º/20º 40º/20º 40º/20º 40º/20º 40º/20º 50º 50º/20º 50º/20º 50º/20º 50º/20º 50º/20º 50º/20º 60º 60º/30º 60º/30º 60º/30º 60º/30º 60º/30º 60º/30º WIDE SPRAY PATTERN CHOICE 30º to 80º subject to orifice size. Orifice range 0.004 - 0.026 Other sizes by enquiry. NARROW SPRAY PATTERN CHOICE 10º to 30º subject to orifice size which must be the same on wide and narrow angles. Important a minimum 20º differential must be maintained between wide and narrow angles. Stock range as highlighted in Red. Further sizes available to order. AIRLESS TWINTIPS Type Speedy Speedy Speedy Speedy Mk Mk Mk Mk II III IV V Tip only Tip and seal kit 88-013/0 88-303/0 88-403/0 88-503/0 88-393/0 88-493/0 88-593/0 AIRLESS LINE-MARKING TWINTIPS (TLM) Type Tip only Speedy Mk III Speedy Mk IV Speedy Mk V 88-310/0 88-410/0 88-510/0 AIR ASSISTED AIRLESS TWINTIPS Type Tip only Tip and seal kit TRI-A 83-023/0 83-022/0 To order: Specify tip reference No. followed by wide angle, orifice in inches & narrow angle. eg: Speedy V, 88-503/0 518/20 or TRI-A, 83-023/0 412/20. Mk V Mk IV TRI-A Airless Spray Tips & Accessories TYPE REF DESCRIPTION Titan Variable Spray Tips 341-0XX 341-3XX 36-052/0 36-053/0 36-054/0 36-057/0 Titan Variable Tip Spare needle for Titan Tip Tip Guard for Titan variable Tip Guard for Titan variable Tip Guard for Titan variable Tip Guard for Titan variable tip tip tip tip All sizes, 15, 20, 24, 28, 41, 49 All sizes Fits Graco Fits DeVilbiss Fits Binks Fits Wagner * Tip Cleaning Needles 36-701/00 36-703/00 (Silver) (Box 12x12) 08/110gm for tips up to .011 th orifice (Purple) (Box 12x12) 10/110gm for tips over .011 th orifice Pre-Orifice Discs Colour Code 63-004/0 63-005/0 63-007/0 63-010/0 63-070/0 Yellow Red Blue Black Pre Orifice 0.016” Pre Orifice 0.019” Pre Orifice 0.026” Pre Orifice 0.039” Mix air Pre Orifice All airless and air assist tips listed below are genuine ExitFlex products 63-505/30 Airless Spray Tips Note : This section covers standard airless tips. Reversible systems are featured on following pages 63-505/30 63-509/35 63-507/4 63-510/0 63-515/0 Flat tip Flat Tip Line Marking Tip Insert Tip Insert Tip TN-SSTC-XX Round spray 31-HAF-0180 Round spray 63-509/35 ** ** Industrial Grade Stainless body Superfine Finishing Flat tip type body (Blastaway™) (Turnaflo™ ) * * * ** Special order only - minimum 10 per size Hollow cone spray, tungsten 80° full cone spray S.S 0.5mm orifice 3.95L Hour @ 3Bar (not illustrated) Drain Cleaning Nozzles 63-310/30 63-317/30 63-562/18 63-410/0 Insert tips TN-SSTC-XX 303 Stainless steel static pipe cleaning nozzle (3 x 1mm rear jets) 303 Stainless steel static pipe cleaning nozzle (3 x 1mm rear +1 x 0.7mm front jet) Nylon seal for 63-310/30, 63-317/30,63-410/0 & 63-412/0 Rotary pipe cleaning nozzle (4 x 1mm jets) Drain cleaning nozzles Tip Chart This chart relates to all standard range of tips Each EXITFLEX tip is carefully manufactured and individually tested for assured quality, performance and life, under demanding conditions. Sizes for Superfine tips can be found on page 9 of this brochure. They are not covered by this char t. ORIFICE SIZE SPRAY ANGLES IN DEGREES AND INCHES FLOW RATE 100Bar (1500psi) 10 2/3 20 4/6 30 6/8 40 8/10 50 10/12 60 12/14 70 14/16 80 16/18 90 18/20 100 20/22 110 22/24 L/min GPM inch mm 0.007 0.18 0.18 0.047 0.009 0.23 0.25 0.066 0.011 0.28 0.37 0.087 0.013 0.33 0.57 0.15 0.015 0.38 0.72 0.19 0.017 0.43 0.98 0.26 0.019 0.48 1.30 0.34 0.021 0.53 1.52 0.40 0.23 0.58 1.83 0.48 0.025 0.63 2.13 0.56 0.027 0.68 2.50 0.66 0.029 0.73 2.95 0.78 0.31 0.78 3.42 0.90 0.033 0.84 3.80 1.00 0.035 0.89 4.30 1.14 0.037 0.94 5.10 1.34 0.039 0.99 5.50 1.45 0.041 1.04 6.15 1.62 0.043 1.09 6.80 1.79 0.045 1.14 7.40 1.95 0.047 1.19 7.94 2.09 0.049 1.24 8.50 2.25 0.051 1.29 9.10 2.40 0.053 1.35 9.80 2.60 0.055 1.40 11.00 2.90 0.057 1.45 11.80 3.10 0.059 1.50 12.50 3.30 0.061 1.55 13.70 3.60 inch mm 10 2/3 20 4/6 30 6/8 40 50 60 70 80 8/10 10/12 12/14 14/16 16/18 SPRAY ANGLES IN DEGREES AND INCHES Standard range 90 18/20 100 20/22 110 22/24 L/min GPM Speedy range = Standard tip spray angle for the given orifice size = Speedy tip spray angle for the given orifice size Spray angles quoted are correct but spray width depends upon viscosity, solids and pressure. Figures quoted as a guide only. Note Other sizes may be possible by special enquiry. Please enquire. Air Assisted Airless Spray Tips, Seals & Caps 63-552/30 Mixair Tip AK (Kremlin pattern) groove type * 63-550/11 Mixair Tip AK (Kremlin pattern) pin type * 36-610-K10 Micro Tip Filter 100 mesh for AK tips (pack 10) * 36-618-K10 Micro Tip Filter 100 mesh for flat tips c/w 21-008 seal (pack 10) * 63-555/11 Mixair Tip AL (Larius pattern) Pin type * 63-555/30 Mixair tip AL (Larius pattern) Groove type * 63-560/15 Mixair Tip AG (Graco pattern) GGW fits HS200 * 63-611 Mixair Tip AG (Graco pattern) GG4 fits Alpha 5 * 63-562/19 Seal AG tip * 63-565/30 Mixair Tip AB (Binks pattern) Vantage™ * 63-570/11 Mixair Tip AS (Sagola pattern) Speeflo™ * 63-554/18 O Ring PTFE 3.5 x 2 AK, AL 63-573/18 O Ring PTFE seal AS tips 63-580/19 Mixair Tip RE Black plastic (Excl seal) 163-582 Seal RE Pattern Tip Black plastic 63-597/020 Mixair Tip AW (Wagner B pattern) Black plastic * 63-577/30 Mixair Tip AO (Opco Böllhoff Pattern) 15mm * 63-598/30 Mixair Tip AD (DeVilbiss Optima™wiwa) 9.5mm * 83-015 TRI-A™ Ball tip TRI-A™ 63-610/30 Mixair tip DT (Dete Krautzberger pattern) * * Please refer to Page 49 for full TRI-A reversible air assisted airless system details & discounts Air Caps EBX-3 EBX-8 Air Cap Air Cap For AK pin type Mixair tips For AK pin type Mixair tips * * Blast-A-Way Pony POSITION 1 2 4 5 6 8 9 10 11 12 13 14 16 7 7 7 7 7 TYPE REF 21-102/0 21-103/0 21-104/0 21-105/0 21-116 21-107/0 21-001/2 21-002/32 21-004/7 21-005/23 21-006/18 21-008/46 21-009/26 21-010/6 21-011/41 21-012/30 21-013/30 21-014/11 21-015/0 21-016/41 21-033 21-202/2 21-203/2 21-204/2 21-205/2 21-207/2 DESCRIPTION Blastaway Pony Blastaway Pony Blastaway Pony Blastaway Pony Blastaway Pony Blastaway Pony Nut Housing (st st) Ball Seal ‘O’ Ring PTFE (old number 201-026) Seal Handle Screw and Washer Seal Spacer Screw Seat (brass) Repair Kit Guard (Black) Screw (Delavan) Adaptor Adaptor Adaptor Adaptor Adaptor Fits Fits Fits Fits Fits Fits Graco DeVilbiss Binks Atlas Copco Iwata Wagner, Aro Fits Fits Fits Fits Fits Graco DeVilbiss Binks Atlas Copco Wagner, Wiwa, Aro Blast-A-Way MKII Speedy BASE UNITS 88-262 Base 88-243 Base 88-264 Base 88-265 Base 88-266 Base 88-247 Base unit unit unit unit unit unit fits fits fits fits fits fits 7/8 x 14 3/8 NPS 3/4 x 20 M18 x 1 M18 x 1.5 11/16 x 16 *SPRAY TIPS 88-010 Standard tip 88-020 SF Superfine tip 83-013 Twin Tip SPARE PARTS 88-061 Safety guard 88-052 Adaptor 88-054 Adaptor 88-055 Adaptor 88-526 Adaptor 88-057 Adaptor 88-060 Housing stainless 88-063 Swivel seal assembly 88-023 Pre-adaptor 3/8 NPS F – 7/8 x 14 M 88-027 Pre-adaptor 11/16x16 F – 7/8 x 14 M 21-008 Gasket Blast-A-Way MKIII Speedy BASE UNITS 88-552 Base 88-553 Base 88-554 Base 88-555 Base 88-556 Base 88-557 Base unit unit unit unit unit unit fits fits fits fits fits fits 7/8 x 14 3/8 NPS æ x 20 M18 x 1 M18 x 1.5 11/16 x 16 *SPRAY TIPS 88-391 Standard ball tip and seal 88-392 SF Superfine ball tip and seal 88-390 Linemarking tip and seal 88-303 Twin tip SPARE PARTS 88-506 Safety guard No 2 and 3 88-536 Safety guard Nos 4, 5, 6, 7 88-512 Adaptor 88-544 Adaptor 88-545 Adaptor 88-526 Adaptor 88-547 Adaptor 88-504 Housing stainless steel No 2 and 3 88-534 Housing stainless steel No 4, 5, 6,7 88-505 Seal and gasket kit 88-523 Pre-adaptor 3/8 NPS F – 7/8 x 14 M 88-527 Pre-adaptor 11/16x16 F – 7/8 x 14 M 21-008 Gasket IMPORTANT NOTE Speedy III tip and seal kits are interchangeable into GRACO RAQ IV systems. The tip cylinders must be fitted with the matching seal supplied. Blast-A-Way MKIV Speedy BASE UNITS 88-452 Base 88-453 Base 88-454 Base 88-455 Base 88-456 Base 88-457 Base unit unit unit unit unit unit fits fits fits fits fits fits 7/8 x 14 3/8 NPS æ x 20 M18 x 1 M18 x 1.5 11/16 x 16 *SPRAY TIPS & TIP & SEAL KITS 88-401 Standard tip cylinder 88-491 Standard tip & seal kit 88-402 SF Superfine tip cylinder 88-492 SF Superfine tip & seal kit 88-490 L M Linemarking tip cylinder 88-403 Twin tip SPARE PARTS 88-506 Safety guard No 2 and 3 88-536 Safety guard Nos 4, 5, 6, 7 88-512 Adaptor 88-544 Adaptor 88-545 Adaptor 88-526 Adaptor 88-547 Adaptor 88-404 Housing stainless steel No 2 and 3 88-434 Housing stainless steel No 4, 5, 6,7 88-463 Seal kit 88-523 Pre-adaptor 3/8 NPS F – 7/8 x 14 M 88-527 Pre-adaptor 11/16x16 F – 7/8 x 14 M 21-008 Gasket IMPORTANT NOTE Speedy IV tip and seal kits are interchangeable into ASM, WAGNER & GRACO RAQ systems. The tip cylinders must be fitted with the matching seal supplied. Blast-A-Way MKV Speedy BASE UNITS 88-552 Base 88-553 Base 88-554 Base 88-555 Base 88-556 Base 88-557 Base unit unit unit unit unit unit fits fits fits fits fits fits 7/8 x 14 3/8 NPS æ x 20 M18 x 1 M18 x 1.5 11/16 x 16 *SPRAY TIPS 88-591 Standard ball tip cylinder kit 88-592 SF Superfine ball tip cylinder kit 88-590 L M Linemarking tip cylinder kit 88-503 Twin tip SPARE PARTS 88-506 Safety guard No 2 and 3 88-536 Safety guard Nos 4, 5, 6, 7 88-512 Adaptor 88-544 Adaptor 88-545 Adaptor 88-526 Adaptor 88-547 Adaptor 88-504 Housing stainless steel No 2 and 3 88-534 Housing stainless steel No 4, 5, 6, 7 88-509 Seal kit 88-523 Pre-adaptor 3/8 NPS F – 7/8 x 14 M 88-527 Pre-adaptor 11/16x16 F – 7/8 x 14 M 21-008 Gasket IMPORTANT NOTE Speedy V tip and seal kits are interchangeable into ASM, WAGNER & GRACO RAQ & GHD systems. The tip cylinders must be fitted with the matching seal supplied. Airless Spray Lances NO. 1 2 2 2 2 2 3 3 4 4 5 5 5 5 6 6 7 8 9 10 11 12 13 TYPE REF 32-050/2 36-202/43 36-203/30 36-204/30 36-205/30 36-207/43 32-002/17 32-007/17 32-102/17 32-107/17 36-020-K10 36-009-K10 36-005-K10 36-003-K10 32-132/27 32-137/27 21-008/46 32-306/16 32-312/16 32-318/16 32-324/16 32-336/16 38-004 DESCRIPTION Universal connector Nut 7/8 - 14 UNF Graco Nut 3/8 - 18 NPS DeVilbiss, Kremlin Nut 3/4 - 20 UNF Binks M 18 x 1 Atlas Copco Nut 11/16 - 16 UNEF Wagner, Aro Directional w/filter housing 7/8 UNF Directional w/filter housing 11/16 UNF Straight filter housing 7/8 UNF Straight filter housing 11/16 UNF Disc filter 30 mesh. Pack of 10 Disc filter 60 mesh. Pack of 10 Disc filter 100 mesh.Pack of 10 Disc filter 200 mesh Pack of 10 Straight adaptor 7/8 UNF Straight adaptor 11/16 UNF Seal Lance 6 inches Lance 12 inches Lance 18 inches Lance 24 inches Lance 36 inches Nylon plug seal (use in place of filter for speedy MKV) 12” extrension on SP90 airless gun (page 40) with directional filter housing & Speedy MkV (page 39). Directional filter housing & Speedy MkV (page 54) Airless Spray Lances Flow Gun ✔ 350 Bar (5,000 psi) max inlet pressure ✔ fluid inlet connection 1/4 NSP(M) ✔ weight: 500 grams Airless Flow Gun - model 880-355 suitable for application of grease, sealers and various products of high viscosity. Normaly used with extrusion pumps up to 350 Bar MWP. Trigger guard fitted as standard. 880-355 Flow Gun Pole Guns ✔ 210 Bar (3,000 psi) max inlet pressure ✔ fluid inlet connection 1/4 NPS(M) Airless Pole Guns - suitable for many kinds of paint products. Trigger guard included. Needle extended up to an adjustable position housing, 11/16”UNF connection to accept 88-457 Mk IV tip housing. PG-300 PG-240 PG-180 PG-150 PG-130 PG-090 PG-050 * * Pole Pole Pole Pole Pole Pole Pole Gun Gun Gun Gun Gun Gun Gun * Stock, others to order 3000mm 2400mm 1800mm 1500mm 1300mm 900mm 500mm SP90 Manual Airless Spray Gun ✔ 500 Bar MWP ✔ 4 finger trigger ✔ gun handle filter (included) ✔ CE marked ✔ swivel fluid inlet ✔ choice of 1/4 NPS / 1/4 BSP or M16 fluid inlet connection SP90 illustrated with 88-557 Speedy MkV (rated 517 Bar) - see page 54 SP 90 Models TYPE REF 90-500/00 90-501/00 90-502/00 90-530 DESCRIPTION SP90 manual spray SP90 manual spray SP90 manual spray SP90 manual spray gun gun gun gun 500 500 500 500 Bar Bar Bar Bar rated. rated. rated. rated. 1/4 NPSM male fluid connection inc speedy + tip M16x1.5 male fluid connection inc speedy + tip 1/4 BSP male fluid connection inc speedy + tip 1/4 NPSM male fluid connection inc speedy + tip 11/16 x 16 11/16 x 16 11/16 x 16 7/8 x 14 Spare parts for SP90 spray guns POS. REF DESCRIPTION 1 90-401 Guard and nut assembly 4 90-404/2 Fluid tip diffuser 7/8 x 14 4 90-404/7 Fluid tip diffuser 11/16 x 16 5 90-405 Guard 6 90-406 Needle 7 90-407 Needle packing seal 8 90-408 Pressure washer 9 90-409 Needle packing screw 10 90-410 Cylinder 11 90-411 Locking nut 12 90-412 Gun spring 13 90-413 Spring cap POS. 14 15 17 18 19 20 21 22 23 24 REF 90-414 90-415 90-417 90-418 90-419 90-420 90-421 90-422 90-423 90-424 90-430 90-300 DESCRIPTION Handle gasket Handle Filter spring Gasket Swivel 1/4 NPS Swivel M16 x 1.5 Swivel 1/4 BSP Trigger assembly Trigger lock assembly Trigger pin and nut Needle repair kit (90-406/408/409/411) Repair kit SP91 Manual Lightweight Airless Spray Gun ✔ 350 Bar MWP ✔ 2 finger trigger ✔ ultra lightweight (425g) ✔ CE marked ✔ swivel fluid inlet ✔ trigger guard ✔ 1/4 BSP fluid inlet connection SP91 illustrated with Speedy MkIV (rated 400 Bar) - see page 53 SP91 Models TYPE REF 91-700 DESCRIPTION SP91 manual spray gun 350 Bar rated. 1/4 BSP male fluid connection inc speedy + tip Spare parts for SP91 spray guns POS. REF 3 91-703 5 91-705 5-1 91-705-1 6 91-706 7 91-707 8 91-708 10 91-710 11 91-711 13 91-713 14 91-714 DESCRIPTION Trigger guard Fluid tip diffuser O ring Needle End cap Pusher Packing retainer Packing case Trigger assembly Spring POS. 15 16 17 18 19 20 21 22 23 Diffuser thread M18 x 1.5 accepts 88.-556 speedy V or 88-456 speedy IV REF 91-715 91-716 91-717 91-718 91-719 91-720 91-721 91-722 91-723 DESCRIPTION Pusher pin (x2) U packing Swivel connection 1/4 BSP Trigger pin Hex. Cap nut (x2) Set screw O ring Back up ring T2 Spanner