Transcript
SR-WOD4 / SR-WOD5 / SR-WOD6 / SR-WOD8 SHAKER SERIES HIGH PERFORMANCE ALL WEATHER OUTDOOR SPEAKERS
Welcome!
Installation Notes
Thank you for your interest in VM Audio products. Our goal is to enhance your listening experience. The Shaker Series was designed as the economical solution for a performance-craving, casual consumer. The experts and engineers at VM Audio have meticulously tested and designed this product with a reasonable price tag to fit any budget. Let the Shaker Series maximize the value of your investment.
Table of Contents System Features
2
Important Safety Information
3
Applications
4
Package Contents
4
Installation
4
Connecting the Speakers to Your Receiver
6
Troubleshooting
7
Specifications
8
Limited Warranty Agreement
9
System Features • • • • • • • • • • • •
2
High Performance All Weather Outdoor Speakers Wide Spectrum Frequency Design All Weather Resistance, High Impact Cabinet Optimum High Output Full Range Audio Reproduction Deep, Solid Bass Performance CAD Tuned Bass Reflex Cabinet Design High Excursion Woofer Titanium Laminated Midrange Driver Titanium Laminated Dome High Frequency Driver Polymer-Coated Silver Fused Polypropylene Cone High Compliance Half-Roll Foam Surround Propulsion Drive Flux-Cycle Motor System
11
Installation Notes
System Features (continued) • High-Strength Kapton Former with KSV Voice Coil • All-Weather Speaker Wire Connector
Important Safety Information
CAUTION 1. Please read these instructions carefully before you attempt to install and operate this product. 2. Keep this User Guide for future reference. 3. Save all packaging in the event this product needs to be returned for service or replacement. 4. Heed all warnings. This product can be hazardous if not used properly or as directed. 5. Set up your system in a safe and secure manner. 6. Protect speaker wires from being walked on or getting pinched. 7. Before placing, installing, or suspending this product, inspect all hardware, brackets, and surfaces for damage. If a fault is discovered, correct it immediately. 8. Do not attempt to service this product. Refer all servicing to qualified service personnel. 9. This loudspeaker can easily reproduce sound pressure levels (SPL) loud enough to cause permanent ear damage that could result in hearing loss. Take great precaution to protect yourself from prolonged exposure to high output sound pressure levels.
10
3
Applications Outdoor/Indoor, Backyard, Garage, Warehouses, Parking Lots, Restaurants, Bars, and much more.
Package Contents Your Shaker Outdoor Speakers were carefully packaged to ensure a safe and secure transport to its destination. Please review the contents of the package and make sure you have received all the items included with your speakers. • • • •
(2) (2) (1) (1)
White All Weather Speakers Mounting Brackets with Mounting Hardware User Guide Online Production Registration Card
Installation Mounting Tips • It is recommended you install these speakers to a solid surface such as wood studs. If installing to a material such as drywall, ensure that the surface can support the weight of the speakers. The use of wall anchors is highly recommended. • Before securing the speakers to your desired mounting surface, ensure the speakers will clear any obstacles such as lighting fixtures, door or window frames, ceilings, etc. • While these are outdoor speakers, you will extend the life of these speakers if they are installed in an area where they receive minimal exposure to the elements. • The mounting brackets provided allow you to mount the speakers either horizontally or vertically and to aim the speakers in a precise direction that facilitates optimum sound quality. • If, at any time, you are unsure regarding the installation process, contact either VM Audio or a professional installer for assistance.
Limited Warranty Agreement Your product is covered by a limited warranty by VM Audio as established below:
Electronics Limited Warranty Products purchased from an Authorized VM Audio Dealer are warranted to be free of defects in material and workmanship for one (1) year from the date of original purchase under normal usage. Products that are identified as “refurbished” have a limited warranty of ninety (90) days from the date of original purchase. Dated proof of purchase (original receipt or invoice) will be required for all warranty claims. In the unlikely event that you experienced a manufacturing defect or malfunction during the warranty period, VM Audio will repair the defective product or replace with the same or equivalent product if the same item is not available or discontinued. Replacement product may have superficial blemishes or scratches that do not affect the performance of the product. This warranty is only intended and valid for the original purchaser and cannot be extended to subsequent owners. Any applicable implied warranties are limited to the period of the expressed warranty starting from the original purchase date. No warranties, expressed or implied, will be accepted after the previously listed periods. Exclusions may apply. Please check your local state laws.
Instructions for Claiming Warranty Service If you should require warranty service, please return the product to the Authorized VM Audio Dealer where you originally purchased the item for an experienced and speedy claim of your warranty service. Contact VM Audio directly to find the Authorized Dealers nearest you. In case the defective merchandise needs to be returned to VM Audio, please contact us and a Return Merchandise Authorization (RMA) number will be assigned. It is important to pack all defective items in the original packaging to prevent damages from shipping, and be sure to write the RMA number clearly on the outside of the box for faster processing. Do not include nondefective items as it is not necessary and will increase your shipping costs.
Limited Warranty Agreement Include a copy of the original receipt or invoice with the purchase date, dealer’s name, customer’s name, and invoice number clearly visible. Manufacturing date may be used if no proof of purchase is provided. The customer will pay to ship the defective product; COD will not be accepted. Please follow the above instructions carefully to prevent voiding your warranty. Your Warranty Service Does Not Cover the Following: • Products not purchased from an authorized VM Audio Dealer • Damages from poor installation by not following the included instruction manual • Damages due to excessive moisture, heat, and other elements from improper care • Evidence of tampering or repair by non-authorized personnel • Products not issued an RMA number • Damage during freight from poor packaging or handling • Return shipping on non-defective items
Warranty Turnaround Time It is VM Audio’s goal to turnaround the merchandise in a timely fashion of 1 week. Unexpected delays may occur due to repair parts or replacement shortage.
International Warranty Please check with your Authorized International VM Audio Dealer or distributor for specific warranty policies and processes for your country.
4
9
Specifications
Installation (continued)
SR-WOD4 • • • • •
RMS: 60W Total Peak: 240W Total Sensitivity: 87dB Frequency: 80Hz - 20kHz Impedance: 8 Ohms
Mounting the Speakers • • • •
Midrange Driver: 1-½” High Frequency Driver: ½” Woofer Size: 4” Dimensions: 8.85 in. (H) x 5.5 in. (W) x 5.7 in. (D)
SR-WOD5 • • • • •
RMS: 65W Total Peak: 260W Total Sensitivity: 88dB Frequency: 70Hz - 20kHz Impedance: 8 Ohms
• • • •
Midrange Driver: 1-½” High Frequency Driver: ½” Woofer Size: 5.25” Dimensions: 9.10 in. (H) x 7 in. (W) x 7.15 in. (D)
SR-WOD6 • • • • •
RMS: 75W Total Peak: 300W Total Sensitivity: 90dB Frequency: 60Hz - 20kHz Impedance: 8 Ohms
• • • •
Midrange Driver: 1-½” High Frequency Driver: ½” Woofer Size: 6.5” Dimensions: 11.00 in. (H) x 7.8 in. (W) x 7.60 in. (D)
SR-WOD8 • • • •
RMS: 90W Total Peak: 360W Total Sensitivity: 91dB Frequency: 50Hz - 20kHz
• • • •
Impedance: 8 Ohms High Frequency Driver: 3” Woofer Size: 8” Dimensions: 15.50 in. (H) x 10 in. (W) x 8.60 in. (D)
1. With a pencil, mark the intended mounting locations, using the mounting brackets as a template. 2. Pre-drill a hole directly into the installation locations. If you are not installing into a wall stud, insert wall anchors (not included) into the mounting holes.
Wall Stud
No Stud
Drywall
Drywall
3. If necessary, pull speaker wire out from the wall and thread it through the hole in the mounting brackets. 4. Position the brackets over the installation holes and secure to the wall using #10 screws (not included).
5. Secure the speaker to the bracket by positioning the speaker between the bracket arms. Align the holes in the tops and bottoms of the brackets with the holes in the tops and bottoms of the speakers. Secure the speakers to the brackets using the mounting knobs. Tighten them securely.
6. Pull lightly on the speakers to ensure the screws and brackets are properly aligned and secured to the mounting surface. 7. After you verify the brackets are secured to the wall, you can loosen the mounting knobs to adjust the speakers to your desired angles. Re-tighten the knobs when you reach the desired position.
8
5
Connecting the Speakers to Your Receiver
Troubleshooting
Tab Connection
No Sound
(SR-WOD4/SR-WOD8)
1. Strip the red and black receiver wires approximately ½” to expose the bare wire. Ensure there are no frayed wires by twisting any frayed ends together. 2. Pull the red tab down on the back of the speaker and insert the red (positive) wire into the hole. Release the tab to secure the connection. Repeat this step for the black (negative wire) and black tab on the speaker.
Binding Post Connection
(SR-WOD5/SR-WOD6)
1. Strip the red and black receiver wires approximately ½” to expose the bare wire. Ensure there are no frayed wires by twisting any frayed ends together. 2. Unscrew the tops of the binding posts on the backs of the speakers in a counterclockwise direction to reveal the holes drilled through the metal posts.
• Check the speaker wires and ensure they have a solid connection to all the speaker terminals on each speaker and on the amplifier or receiver. • Check that the receiver or amplifier is powered “on” at the mains, is not on “mute”, has no headphones attached and that the channels used for the speakers (usually A or B) is in operation. • Refer to the owner’s guide that came with your receiver or amplifier for troubleshooting guidelines for the unit. • Most initial problems are connectivity, please try a different connection cable to your in-ceiling speakers or equipment.
No Sound from One Speaker • Check the “balance” control on your receiver amplifier. • Check all connections and cable to the inoperable speaker. • Disconnect the “working” speaker from the receiver amplifier connection/channel. Switch the cord from the non-operating speaker from its current connection to the “working” speaker connection. If the speaker now works, the problem is your receiver amplifier. • Reconnect as original. Remove the speaker cable at the “working” speaker directly and connect it directly to the non-working speaker. If the speaker now works, the problem is somewhere in the original speaker cable. • If the speaker still does not work the problem is the speaker.
3. Connect the red (positive) wire to the positive binding post. This is the post on the right when facing the back of the speakers. Connect the black (negative) wire to the black (negative) binding post. 4. Tighten the binding posts by screwing the tops in a clockwise direction.
6
7
