Transcript
Gateways / SR10 ADSL2+ 1-port
THE SR10 DSL GATEWAY entry-level DSL subscriber. The SR10 combines a full-rate ADSL2+ automatic broadband connection feature eliminates the need for an ity with industry-leading TR-069 remote management systems.
/ FEATURES
/ BUILT-IN SUPPORT FOR
• 1 RJ-45 port for 10/100 Base-T Ethernet LAN connections
• Automatic Broadband Connection
• One RJ-11 port for connection to ADSL2+ WAN
• TR-069 Device Management
• One factory reset button
• Customized factory default settings
/ PRODUCT FEATURES ADSL ITU-T G.992.5 (ADSL2+) ITU-T G.992.3 (ADSL2) Annex L (Reach Extended ADSL2) Annex M (Extended Upstream Bandwidth) Broadcom PhyR™ Impulse Noise Protection SRA (Seamless Rate Adaptation) ITU-T G.992.1 (G.dmt) & ITU-T G.992.2 (G.lite) ANSI T1.413 Issue 2 ATM Up to 8 PVCs Per-PVC packet level QoS Remote Management TR-069 Device Management TR-098 Gateway Device Model TR-106 Generic Device Model TR-111 LAN Device Management Automatic Subscriber Activation Real-time Status and Reporting Remote Firmware Upgrades Value-added service provisioning (IPTV, VoIP, Parental Controls) Security Stateful Packet Inspection Firewall Denial of Service attack prevention MAC Layer Filtering Day-time Parental Control DMZ host Routing and Networking RFC2684 MPoA RFC2364 PPPoA RFC2516 PPPoE PPPoE pass-through 802.1Q VLAN over RFC2684 bridges IP over Ethernet over AAL5
501 SE Columbia Shores Boulevard, Suite 500 Vancouver, Washington, 98661 USA +360 859 1780 / smartrg.com
DNS Proxy DHCP Server and Client DHCP Relay NAPT and NAT IGMP Proxy and Snooping RIP v1/v2 Multiple Protocol VLAN Mux Multiple Service PVC IP/Bridge/802.1p QoS
/ SPECIFICATIONS & STANDARDS Mechanical Dimension: 120mm*118mm*30mm (W*D*H) Weight: 160g Electrical Power Requirements: The SR10 uses an AC adapter that supplies DC voltages. AC power adaptor: 100VAC-240VAC DC voltage: 12V, 0.7A Heat & Power Dissipation: Power: < 9W Environmental The SR10 complies with the following standards: Temperature: 0 to 55 degrees C (Standard Operating) 20 to 70 degree C (Non-operating) Humidity: 0% to 90% (Non-condensing, Standard Operating) 5% to 95% (Non-condensing, Non-operating) Vibration: IEC 68-2-36, IEC 68-2-6 Shock: IEC 68-2-29 Drop: IEC 68-2-32
© 2014 SmartRG, Inc. SmartRG and the SmartRG logo are registered trademarks or trademarks of SmartRG, Inc., incorporated in the U.S.A. All other names are properties of their respective owners. Product photo may differ from actual product, however functionality remains as stated above. Specifications are subject to change without notice. DSSR10/1114
