Transcript
SRF 1750 (2x5) SNG Receiver Switch
General Description: Based on Quintech's SRF 1750ABT switch and the LS series 8-way splitters, the SRF 1750 (2x5) will provide power insertion to two LNBs and output to five satellite receivers. Selection of either the V or H input will be via front panel mounted toggle switches for each of the five satellilte receivers. The SRF 1750 (2x5) switch unit is rack mounted in a 19 inch, single RU enclosure. Power is provided through an internal DC power supply, with one AC input power cord. Note: All unused ports must be terminated.
Specifications: Frequency:
950-1750 MHz
Port-to-Port Isolation (Input):
45 dB
Insertion Loss/Gain:
0 + 2.0 dB
Frequency Response:
+ 1.0 dB
Input Return Loss:
12 dB
Output Return Loss:
10 dB
Impedance:
75 Ω
RF Connectors:
Type "F", 75 Ω (BNC optional)
Power Requirements:
100-240 VAC, 60/50 Hz
Mechanical:
1 RU (1.75"H x 19"W x 18.5"D)
Available From MEGA HERTZ (Master Distributor) • 800.883.8839 • http://www.megahz.com 2001 Quintech Inc. All rights reserved. All product designs and specifications are subject to change without notice. SRF 1750 (2x5) Rev A • Created on 1/14/2002 3:06 PM
