Transcript
Mixer Amplifier
120W rms, Compact mixer amplifier with 2 Mic inputs, 2 Line inputs and integral USB digital audio player suitable for many varied applications including bars, fitness studios, restaurants and live PA. Mic and line channels have shared Lo/Hi EQ and Mic 1 has adjustable Vox priority. Phantom power is provided on channel 1 for condenser microphones. • • • • •
Integral USB digtal audio player with FM tuner Choice of 4 Ohms min. or 100V line output Adjustable Mic 1 Vox priority function 3.5mm Aux in option on front panel Compact 1U rack format
• • • •
Mic channels 2-band EQ, Line channels 2-band EQ Switchable +32V phantom power (Mic 1) Soft-knee output limiter Multi-speed cooling fans
Power supply Mic inputs Line inputs Mic controls Line controls Phantom power USB/FM player controls LED indicators Antenna connection Line output Speaker outputs Dimensions
Switchable 110/240Vac, 50/60Hz (IEC) Mic 1 front combo, Mic 1+2 rear 6.3mm jacks Line 1+2 RCA (pairs) + Aux Line minijack (front) Mic 1 Level, Mic 2 Level, Low/High EQ, Vox Line 1 Level, Line 2 Level, USB/FM Level Low/High EQ +32V switchable (Mic 1) Play/pause, Pre (Ch-), Next (Ch+), mode On, -24/18/12/6/0dB, Limit F plug RCA (L+R) with Master volume control 2 x 6.3mm jack (4 ohms min) or Com/100V screw terminals 483 x 44 x 325mm (1U)
Power supply Switchable 110/240Vac, 50/60Hz (IEC) Speaker 2 x 6.3mm jack (4 ohms min) or Com/100V outputs screw terminals
Speakers
A pair of 2-way water resistant, oval speakers which are ideal for marine use or PA applications in bathrooms, swimming pools, patios etc.
• • •
6" x 9" (15 x 23cm) oval driver with PP carbon cone and rubber surround Coaxial 1" (2.5cm) mylar dome tweeter with integral crossover Available in 4 or 8 ohms White polymer weatherproof basket Magnetically shielded
• • • •
Flush mount speakers IP34 rated Complete with fixing clips and screws Supplied in pairs
• •
Speaker size 150 x 230mm (6" x 9") Tweeter 25mm (1") Frequency response60Hz - 20kHz Power rms 50W Cutout 229 x 156mm Mounting depth 90mm SPL @ 1W/1m 85dB (±2dB) IP rating IP34 Dispersion angle 145° Dimensions 267 x 110 x 194mm Weight 1.61kg/unit
Cable
Slave Amplifier Compact slave amplifier with line input and output to either 4 Ohms minimum load or 100V line. Ideal for adding to existing mixer-amplifier setups to drive additional speaker arrays. • •
Choice of 4 Ohms min. or 100V line output Compact 1U rack format
• •
Soft-knee output limiter Multi-speed cooling fans
Flexible PVC sheath for use in light electrical applications. Length
100m
