Ssp1a110bdt - Mouser Electronics

Transcript

SSP1A110BDT Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications solid state relay-panel mount-thermal pad -input 3-32V DC,output 24-300V AC,10 A Main Range of product Zelio Relay Product or component type Solid state relay Provided equipment Thermal pad Device short name SSP1 Mounting support Panel Network number of phases 1 phase Contacts type and composition 1 NO [In] rated current 10 A Solid state output type SCR output Zero voltage switching Complementary [Uc] control circuit voltage 3...32 V DC Minimum switching voltage 3 V DC turn-on Maximum switching voltage 1 V DC turn-off Response time 0.5 cycle turn-on 0.5 cycle turn-off Input current limits 10 mA at 12 V DC Output voltage 24...300 V AC Load current 0.15...10 A Absolute maximum voltage 600 V Surge current <= 120 A for 16.6 ms Maximum I²t for fusing 60 A².s for 8.33 ms at 60 Hz half cycle 66 A².s for 10 ms at 50 Hz half cycle Protection device type Type 1 - 13 A miniature circuit breaker (MCB) - curve B Type 2 - 10 A miniature circuit breaker (MCB) - curve B Leakage current <= 1 mA off-state Voltage drop 1.15 V on-state Oct 12, 2017 1 DV/Dt 500 V/µs off-state at maximum voltage Cos phi 0.5 with maximum load Motor power hp 0.5 hp 120 V AC 1 hp 240 V AC Insulation resistance 1000 MOhm at 500 V DC Capacitance unbalance 10 pF for input/output Dielectric strength 4 kV AC for input/output 4 kV AC for input or output to case [Uimp] rated impulse withstand voltage 6 kV output to case 6 kV input to output Tightening torque 1.5...1.7 N.m for input 2...2.2 N.m for output Connections - terminals Forked type tag connectors : 9.2 x 4 mm for input Ring lugs : 9.2 x 4 mm for input Forked type tag connectors : 11.7 x 4.5 mm for output Ring lugs : 11.7 x 4.5 mm for output Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) with cable end for input Screw terminals : 0.5...5.26 mm², (AWG 20...AWG 10) with cable end for output Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) without cable end for input Screw terminals : 0.5...8.26 mm², (AWG 20...AWG 8) without cable end for output Thermal resitance 1.03 °C/W junction to case Thermal impedance 0.48 °C-in²/W at 25 psi Local signalling LED, green for input IP degree of protection IP20 Safety reliability data B10d = 1731395 MTTFd = 1875.9 years Product weight 89.2 g Environment Ambient air temperature for operation -40...80 °C Ambient air temperature for storage -40...125 °C Pollution degree 2 Overvoltage category III Product certifications RoHS EAC REACH CSA UL CE Marking CE EAC UL CSA Standards EN/IEC 60950-1 EN/IEC 62314 CSA C22.2 No 14-13 UL 508 Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant  - since  1522  -  Schneider Electric declaration of conformity Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Product environmental profile Available Product end of life instructions Available Product environmental End of life manual 2 Product data sheet Dimensions Drawings SSP1A110BDT Dimensions (1) (2) (3) Front view Side view Bottom view 3 Product data sheet Performance Curves Derating Curves A: B: (1) (2) Load Current (Arms) Ambient Temperature (°C) For Heatsink SSRHP25 No Heatsink 4 SSP1A110BDT Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schneider Electric: SSP1A110BDT