Transcript
FOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL: ____________________________________ SERIAL NUMBER: _____________________________ DATE PURCHASED: ___________________________ PURCHASED FROM: ___________________________
BASIC TROUBLESHOOTING PROBLEM
CAUSE
SOLUTION
Machine does not work
Power switch not in "on" position Power cord not plugged into outlet Power cord is faulty Building circuit breaker tripped Faulty wiring Faulty on / off switch
Brush does not work
Brush circuit breaker tripped
Poor brush pickup
Incorrect brush height adjustment Clogged brush Brush is worn Loose brush drive belt
Low suction
Vacuum hose clogged
Turn power switch "on" Plug power cord into outlet Replace with approved power cord Reset circuit breaker Contact Distributor Contact Distributor Check brush and belt for obstructions and remove as needed Reset circuit breaker Adjust brush height Remove debris from brush Contact Distributor Inspect belt and replace as needed Remove vacuum hose and check for obstructions Check vacuum hose for loose cuffs or holes and replace as needed Remove vacuum filter and exhaust filter and clean Check vacuum bag / filter and relplace as needed
Vacuum hose faulty Filters clogged Vacuum bag full
DIA NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
PART NUMBER VA51009 86051 VA51067 VA51007 GT13022 VA51034 VA51008 VA51022 VV20501 VA13489 VA51023 VF13533 VV13635 VF82028 VF13495 VF13502 VA51065 VA51064 VA51050 VA51073 VV13605 VA51041 VA51027 VA51059 VV20509 VF13520 VF13538 VF48202 VF13666 VF44012 VA51038 VF14214 VA51039 VV67504 GT13057 VA51002 VF99926-1 VA51066 ZD57000 VA51011 VA51019
DESCRIPTION HANDLE HOUSING PAPER BAG, DUST, 10L 5qt. CLOTH BAG, DUST (OPTIONAL) REAR COVER AND BAG HOLDER NUT, M5, NYLON INSERT GASKET, ADAPTER ELBOW ADAPTER, HOSE PLUG AND CORD HOOK SCREW, M5x14 NUT, ACORN, M6 HOSE, 2" WASHER, PLAIN, Dia.6 SCREW, M5x20 WIRE ROPE, STAY, REAR COVER SCREW, HEX, M6x16 NUT, M6, NYLON INSERT FILTER, EXHAUST HOUSING, EXHAUST FILTER GASKET, HANDLE HOUSING, 8x13mm, SBR LATCH PLATE SCREW, FLAT, M6x16 NYLON WASHER AXLE ECCENTRIC BUSHING SCREW, M5x10 RETAINING RING, EXTERNAL, Dia.12 WASHER, PLAIN, Dia.12xDia.24x2 WHEEL, 5" WASHER, PLAIN, Dia.12 SCREW, M5x12.7 SPRING, LATCH SCREW, M5x8 SHOULDER BOLT, LATCH CIRCUIT BREAKER, 2AMP SCREW, SELF-TAPPING, ST5x10 BUMPER, 26" RECTIFIER BLOCK, BRUSH SHAFT, LEFT MOTOR, BRUSH, 115V MOUNT PLATE, MOTOR PULLEY, MOTOR
NO. REQ'D 1 1 1 5 1 1 1 20 1 1 10 3 1 5 1 1 1 1 1 2 4 1 2 17 2 2 2 2 2 1 1 1 1 14 1 1 1 1 1 1
DIA NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82
PART NUMBER VA51021 VF14254 VA51018 VA51035 VF13508 VA51037 VA51036 VA51042 VA51013 VA51043 VA14001 VA51014 VA51004 VA51005 VA51005A VA51047 VA51003 VA51006 VA51015 VA51017 VA51016 VV20502 VA51048TR VA51001 VA51071 VA13476 VA51040 VA51052 VA51012 VV10120 GT13070 VA51032 VA51033 ZD52000A VA51049 VF82082TR VA65001TR VA51044 VF83109 VV13650 VA51026 VF91346
DESCRIPTION DRIVE BELT SCREW, HOLDING, M5x8 PULLEY, BRUSH KNOB, ROLLER ADJUST SCREW, HOLDING, M4x8 SPRING, ROLLER ADJUST LOCK PIN, ROLLER ADJUST ROLLER, 1.5" CLAMP, ROLLER BRACKET AXLE, ROLLER RETAINING RING, EXTERNAL, Dia.10 ROLLER BRACKET BOTTOM SHOE PLATE, 26" BRUSH, 26" BRUSH, ASSEMBLY, 26" BRACKET, RECTIFIER BRUSH HOUSING, 26" SHAFT, BRUSH, 26" BEARING STRING GUARD, BRUSH BLOCK, BRUSH SHAFT, RIGHT SCREW, FLAT, M5x16 LABEL, "SSS" BASE HOUSING, 26" LATCH, HANDLE SCREW, M5x40 SHOULDER BOLT, PIVOT LABEL TUBE, BASE HOUSING CLAMP SCREW, SELF-TAPPING, ST4.8x25 RETAINER RING, VACUUM MOTOR GASKET, VACUUM MOTOR VACUUM MOTOR, 115V FILTER, VACUUM MOTOR LOGO, "SSS" POWER CORD, 14/3C, SJTW, 50FT STRAIN RELIEF, CORD CATCH SCREW, M4x10 PLATE, SWITCH SWITCH, ROCKER
NO. REQ'D 1 1 1 1 1 1 1 2 4 2 4 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 2 1 1 1 4 1 1 1 1 1 1 1 1 6 1 1
DIA NO. 1 2 3 4 5 6 7
PART NUMBER VA51061 VA51060 VA20803 VA20806 VA20807 VA20209 VA20248
DESCRIPTION KIT TOOLS (OPTIONAL) HOSE ASSY DUSTING TOOL CREVICE TOOL UPHOLSTERY TOOL WAND TUBE
NO. REQ'D 1 1 1 1 1 1 2
WARRANTY POLICY The warranty terms outlined below are in lieu of any other warranties, either stated or implied, including any implied warranty of merchantability, fitness for a particular purpose or otherwise. Under no circumstances will seller be liable for any loss, damage, expense or consequential damages arising in connection with the use or inability to use this product. This warranty does not apply to damage or defect caused by accident, misuse, negligence, abuse, fire or to any Triple S product which has been serviced by anyone other than a Triple S authorized service representative. Housings or parts that have become damaged as a result of improper use of the machine are excluded from this warranty. Refer to owner’s manual for proper machine use and maintenance. Parts that are expected to wear from normal use and, therefore are not covered under the parts warranty include, but are not limited to: batteries (pro-rated for one year); bearings; belts; brushes; filters; squeegees; switches; and tires. This warranty commences on the date of purchase of the product by the original end user from an authorized Triple S distributor, subject to proof of purchase. If proof of purchase date is unavailable, the warranty begins 90 days after the sale of the product to an authorized Triple S distributor.
Subject to the conditions outlined above, the manufacturer warrants the rotationally-molded polyethylene housings and parts on its machines to be free from defects in materials and workmanship, under normal use and service for twelve (12) years to the original purchaser.
Under this warranty, the manufacturer guarantees the performance of non-polyethylene parts and components on Triple S machines to be free from defects for up to five (5) years to the original end user. Parts replaced under this warranty are guaranteed for the remainder of the original warranty period.
Labor charges are covered for five (5) full years from the date of purchase for Triple S products, provided an authorized Triple S service provider is used for repair. No travel coverage is extended for cord electric machines.
Product Exceptions & Exclusions: Battery chargers and all accessories are warranted for one year.
Triple S reserves the right to change the warranty policy without notice.
