Stable Camera Set 2.4 Ghz

Transcript

The ideal addition USB multi-camera receiver with recorder function The receiver, which has the form of a USB stick, can support up to 4 radio cameras (2.4 GHz) live on a PC or laptop. This allows you to monitor the stable, yard and buildings at the same time and even view the recordings at a later date. The ideal addition to our stable camera which can be easily and inexpensively added to with a recording unit without the need for an additional video recorder. Ref. No. Description 1085 Stable and trailer camera set 1/5 1086 Camera-Set inkl. equipment 1/5 1084 OnLink! 1/10 1087 Replacement camera 2,4 GHz 1/10 1078 USB multi-camera receiver 1/10 1077 IR Nachtlicht 90 m² 1/10 1093 AVLink Set 1/10 Stable Camera Set 2.4 GHz € 2-in-1 radio monitoring set with 1200 m range WLAN/LAN option with OnLink! Recommended retail price including VAT at the legal rate. What is 2.4 GHz radio? 1. 2. 3. 4. 1200 m The radio frequency in the 2.4 GHz range is freely available to use (does not require permission from the authorities). In principle, up to a maximum of 4 cameras can be operated simultaneously on different radio frequencies (2400 MHz - 2483 MHz). This means that maximum distances of up to 100 m can be bridged. In this instance, the radio cameras operate via the screwed-on stick antenna with a radio receiver. WLAN / LAN / 3G 2,4 GHz Otherwise, remote transfers of up to 1200 m are made in the same way as with the Kerbl stable camera. For these large distances, directional antennas are used (transmitting and receiving antennas) which must each have precise opposite „line of sight contact“. So it is important to ensure a clear distance between the transmitting and receiving antenna. Since the antennas are located outside, the camera and AVLink are connected via video cable. The AVLink, i.e. the amplifier inside the house, can best handle 2 cameras set to frequency ranges that are as far apart as possible. A third camera can function, however it also depends on other existing radio sources (e.g. WLAN, baby monitor, etc.). 90° 2h 2 years guarantee Kerbl therefore recommends that two cameras be operated for remote transfers and up to four cameras for direct transfer without the use of directional antennas. Your dealer: PR164_EN USB www.kerbl.de Connect your camera to the Internet and watch the images on your PC or smartphone! Razor-sharp images from the stable to the house - at any time!? What if you no longer had to get up in the middle of the night when you suspect something is wrong to check on your animals? With the stable camera set from Kerbl, it really is possible! Convenient for you, stress-free for your animals (who may be in labour). Onlink! makes it possible: • at last, you can view the images from the Kerbl stable camera on your smartphone • the latest P2P technology makes it possible - it‘s simple and incurs no additional costs • of course you can also view the images on several other types of terminal device (smartphone, PC or tablet) The set is a modern radio surveillance kit with an extensive range of up to 1200 m! The camera in the stable and the 2.5 „ LCD monitor inside the house enable optimum monitoring of your animal. The high-quality camera (IP54, night vision lens up to 15 m, sound recording, wide-angle lens) and the extensive range (1200 m of clear sight), coupled with the simple installation process, make the set an indispensable companion for every animal owner. Here‘s how easy it is to use: • connect the AVLink using the audio / video cable supplied in the Kerbl stable camera set with the OnLink! • connect the OnLink! to the power supply and your home network by inserting the LAN cable into the relevant socket • download the (free) camera App (p2pcam264) to your smartphone or tablet. Onlink! comes with installation software for the PC/Mac • connect the OnLink! with your preferred terminal device by entering the code located on the OnLink! or by scanning the QR code This is how easy it is to use the stable camera set: 1. T he camera focuses on the animal and transmits the signal through the cable to the directional antenna on the outside of the stable. 2. T he directional antenna on the wall of the stable sends the signal to the reception antenna over a distance of up to 1200 m. 3. T he reception antenna is linked via video cable to the AVLink in the house, which transfers the video signal via radio to the LCD monitor inside the house. The LCD monitor or amplifier (AV-Link) can also be connected to the TV in order to obtain a larger image. 1 2,4 GHz WiFi nk i AVL 4. T he LCD monitor enables you to move freely around your home or outdoors at a distance of up to 100 m from the directional antenna whilst still receiving images and sound signals. AV Cable nk i AVL AV Cable k! n 2,4 iGHz OnL www WiFi ! ink OnL Router LAN www Smartphone 5. T he stable camera set can easily be extended with another camera. The commissioning of a third camera depends on the local conditions. 6. In a matter of moments the camera can also be installed in a trailer with the monitor in your vehicle. This enables you to monitor your animals during transport. Router LAN Mac / PC Smartphone Mac / PC 2 2,4 GHz Smartphone LCD 100 m Mac / PC WiFi nk i AVL AV Cable 2,4 GHz ! ink OnL Router LAN LCD www Smartphone Mac / PC WiFi 1200 m nk i AVL AV Cable ! ink OnL LAN Router www WLAN LAN 3G Smartphone WLAN LAN 3G Mac / PC Smartphone Mac / PC