Standard Equipment Accessories

Transcript

technical data huddig 1260 standard equipment Cab • Tilting cab • Tinted glass • Large opening sunroof • Driver’s seat with safety belt • Opening side windows • Folding passenger seat with safety belt • Prepared space under driver’s seat for voltage transformer etc. • Windscreen washers and wipers with intermittent front and rear • Storage space • Rear view mirrors 2 interior, 2 exterior folding • Moulded floor mat • Fire extinguisher 6 kg • Sun visors front and rear • Adjustable steering wheel Lighting • Work lamps front x 2 (halogen) • Work lamps rear x 2 (halogen) • Rotating warning lamp with pivoted mounting • Automatic interior lighting • Automatic reversing lamp Gauges • Speedometer • Other gauges integrated in display Brake system • Dual circuit brake system • Electrically operated parking brake • Automatic service brake (can be disengaged) Backhoe • Electric servo operated • Hydraulic tool mounting • Hose rupture protection valve Load unit • Electric servo operated • Prepared for 3rd hydraulic function • Safety bar • Heating system for hydraulic oil • Lockable toolbox on left hand front wing • Hose rupture protection valve on support legs • Belly plates front and rear • Safety start for the engine • Electronic control system with 4 adjustable operating settings. • Foot operated electric inch pedal Buckets • Digging bucket G-85 with Kverneland teeth, 420 l • Front bucket 2.50 m, volume 1450 l with scraper edge in rear face Huddig 1260 is fire protection certified Central warning • The electronic control system alarms using flashing lamps and buzzers and shows text messages in the display Other • Double command • 12V and 24V power outlet • Automatic main circuit breaker • Toolkit • Engine heater accessories Backhoe • Quick hitch for 50 mm pins • Oil-Quick • Hydraulic output, double action Grab John type • Hydraulic motor output, handheld tool type • Hydraulic motor output, brush cutter type etc • Pipe kits for boom for hydraulic motor output • Hydraulic output for rototilt • Hydraulic output for rototilt at Oil-quick • Double float position • Hydraulic output for cable feeder • Pipe kit extra hydraulic quick coupling • Piston rod protection for bucket cylinder Loader • Tool lock including 3rd hydraulic function • 3rd hydraulic function • 3rd function continuous • Float position • Load suspension Cab • Tilting rear windscreen • Automatic climate control • Driver’s seat, air sprung • CD-player with radio + 2 speakers • Cab heater output • Work lamps 6 x extra • Extra rotating warning lamp • Head restraint • Sun visors side windows x 2 • Output lunchbox heater • Heated rear view mirrors • Extension kit to elevate the cab 100 mm Other • Several colour options • Several tyre options • Environmentally friendly oil, operating hydraulics • Thicker belly plates • Central lubrication, prepared • 7-pin towing connection • Tow hitch including pin • Tow hitch for cable ploughing mounted on outrigger support leg • Protective plates at pivot • Diesel heater cab and engine (7 day timer) • Fuel filling pump, electric • Generator 100 A • Lockable toolbox, on right hand front wing • Cruise Control • Air Sentry • Triple R • Bracket for lift • Huddig Lift • Remote control • Railway equipment • Safety equipment Tool loader • Front buckets • Grading buckets • Snow buckets Tool backhoe • Digging buckets • Cable buckets • Slope buckets • Grid buckets • Pusher buckets • Grading cutters • Asphalt cutter • Ground frost hook • Crane arm 2 m technical data huddig 1260 45° Specifications with standard buckets and 520/70x34 wheel fittings A Transport length 8,630 mm B Wheelbase 2,600 mm C Backhoe overhang 1,100 mm D  Height above cab 3,110 mm E  Transport height backhoe 4,380 mm F  Transport length backhoe 2,300 mm G  Ground clearance 515 mm H Ground clearance angle, outrigger support legs   32° I  Maximum width outrigger support legs 3,700 mm Engine Cummins turbocharged diesel engine Model QSB 6,7 Tier III Power output 116kW (157 hp) at 1900 rpm Type Straight 6-cylinder water cooled Cylinder volume 6.7 l Torque 662 Nm at 1100 rpm Transmission Hydrostatic. Gearbox ZF with 2 gears Speeds 1st 0-10 km/h low ratio Speeds 2nd 0-42 km/h high ratio The transmission system is separated from the operating hydraulics. Axles ZF. Automatic differential brake with planetary hub reduction gears. Wheel equipment Standard front and rear 520/70x34 Brake system Transport brakes: Servo assisted disc brakes Parking brake: Spring applied disc brake Service brake: Automatic engagement of transport brake when stationary (automatic function can be disengaged) Steering system Hydrostatic Orbitrol control system with dual cylinders in the centre pivot Width outrigger support legs, parked position J  Width front bucket K  Width over wheels r1 Swing radius outside bucket r2  Swing radius outside wheels 2,460 mm 2,500 mm 2,470 mm 6,288 mm 5,760 mm Backhoe L  Reach M  Depth N  Load height O Digging width 6,530 mm 4,900 mm 3,770 mm 4,200 mm Steering angle Frame oscillation ±32° ±8° Electrical system Voltage Batteries Generator output Starter motor output Hydraulic system Load sensing hydraulic with variable axial piston pumps, 60cc + 100cc (connected to stepped-up pump distribution box provides a total 174cc). The hydraulic system is prepared for Huddig approved environmentally compatible hydraulic oils. Operating pressure: 23.3 MPa (233 Bar) Nominal max flow at 1,000 rpm 176 l/min Nominal max flow at 1,500 rpm 264 l/min Nominal max flow at 2,000 rpm 352 l/min Weight (incl buckets): Volumes Oil engine Cooling system Fuel system Hydraulic oil tank Hydraulic system total 12,850 kg Hydrostatic incl tank Hydrostatic tank Gearbox Front and rear axles Differential and hub reduction 30 20 3 24 Parallel linkage loader Maximum lifting force 61.5 kN (6150 kp) Max breaking force at bucket edge 60 kN (6000 kp) Recommended bucket volume, soil 1-1.4 m3 Recommended bucket volume, light materials 2-2.5 m3 Backhoe Breakout force at bucket edge 103 kN (10300 kp) Digging force at bucket pivot 63 kN (6300 kp) Lifting force at max reach without bucket 19.1 kN (1910 kp) Maximum slewing torque 3700 kpm Recommended bucket volume approx. 350-450 l dm3 (l) 15 20 160 185 340 The machines shown in the brochure have additional equipment. We have a program of continuous product development and we reserve the right to make changes. Manufacturer: Dealer: Huddig AB Box 1054, SE-824 12 Hudiksvall Tel +46 650 375 00 Fax +46 650 375 01 E-mail [email protected] www.huddig.se 24V 2 x 12V, 110 Ah 70A alternating current 5.8 kW Front loader     P  Reach 2,630 mm Q  Lift height leveled bucket 3,500 mm R  Load height 45° tilted bucket 2,690 mm S  Reach 45° tilt angle 1,030 mm T  Max. tilt angle 63° U  Load angle 40° U1 Load angle in carrying position 46° V  Tilt angle ground plane 112° X  Excavation depth 90 mm 1260 1260 SERIES Stronger, more fuel efficient and better loo T he new Huddig 1260 has been modified and improved in several ways. The new, powerful Cummins QSB 6.7 stage 3 engine puts Huddig 1260 in a class of its own. It is stronger than ever and now has 36% higher torque than before. It also has Common-Rail h sure injection, which gives optimal fuel economy. Huddig 1260 has a much rounder shape. The hood is now made of glass fibre reinforced plastic and is in three sections. Each part open and close, which means easier servicing and access to the engine. It has also received cleaner lines; radiator, air cleaner and sil now under the body. The view between the loader and hood has also been improved. Huddig 1260 has an entirely new electrical an tronics system. The previous system has been replaced by a new central computer and information display. The service intervals are and communication with individual machines, can now be carried out remotely via GSM. New designs for the front and side panels. All information about the machine’s settings and functions are shown on the information display. S Improved torque and lower fuel consumption Momentkurvor Torque curves 1160D/1260 1160D/1260 700 650 oking is easy to lencer, are nd elece extended Moment Nm Torque Nm 550 500 450 400 350 The hood is in three sections, which means easier access to the engine. 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 Rek. arbetsvarvtal operating speed Recommended Huddig1260 Huddig 1260 Rek. arbetsvarvtal Speed VarvtalRpm rpm Cummins QSB 6.7 Stage 3 Cummins Eddy5.9, Stage 2 Huddig1160D Recommended operating speed Huddig 1160D 860D/1060 "The increased cylinder Momentkurvor volume, together with the Common-Rail injection system, gives the new Huddig 1260 the best possible fuel economy and improved 550 torque. 500 Huddig 1260 has optimised torque so that the engine produces maximum output at the speeds the 450 backhoe loader uses most, i.e. between 800-1300 rpm. 400 This is an improvement of 36% compared to the previous model. 600 Moment Nm s the new high pres- 600 350 300 250 800 900 Varvtal rpm 1000 1100 1200 1300 1400 1500 1600 Rek. arbetsvarvtal Huddig 1060 Rek. arbetsvarvtal Huddig 860D 1700 1800 1900 2000 2100 Huddig first with remote diagnostics Huddig Telematic means that Huddig's technicians, or Huddig's authorised service agents, can carry out both diagnostics and updates directly in the backhoe loader’s central computer, regardless of where it is in the world - as long as there is GSM coverage! For safety and system integrity no one can call the machine without the operator’s knowledge and approval. A message on the information display must be acknowledged by pushing a button, before contact can be established with the service technician's computer. Unauthorised personnel cannot connect to the system, as the software is password protected. With a new powerful electronic control system the Huddig 1260 is well equipped to meet the future...