Preview only show first 10 pages with watermark. For full document please download

Standing Desk Converter Dual Monitor Assembly Instructions

   EMBED

Share

Transcript

Standing Desk Converter DUAL Monitor Assembly Instructions Moving parts without advanced notice can result, crush and cause personal injury! Be cautious when handling. Make sure the depth of desk is compatible to the optional sit-stand base intended to be installed. Fail to follow the criteria shall result in collision or personal injury. Included: 2.5mm Allen Wrench 5mm Allen Wrench 6mm Allen Wrench Tools Required for Assembly: Clamp 1a Included: 8mm 1/4” Drive Socket Ratchet ¼” drive and extension Phillips Screwdriver Grommet 1b Hardware (may have extra) M6 x10 Machine Screw x7 M6 x16 Flat Head Machine Screw x4 1 5mm M8 x65 Machine Screw x1 2 3 M6 x10 Machine Screw x4 1 19mm Nylon Washer x1 19mm Steel Washer x1 4 5 M8 x20 Machine Screw x1 6 Adapter Plate 2 M6 x18 Machine Screw x4 7 53580 8-32 x 1/2 Machine Screw x4 8 53648 8-32 Serrated Flange Nut x4 These screws first; then the clamp. 9 M6 x16 Flat Head Machine Screw x4 2 M6 x16 Flat Head Machine Screw x4 Grommet Clamp 52443 8-32 x 1/2 Machine Screw x3 10 52127 M4-.7 x 10 Machine Screw x8 11 M6-1 x10 Machine Screw x2 12 3 Instruction #53873 Dual • Dated: 12/2/2016 M8 x65 Machine Screw x1 Standing Desk Converter Dual #53873 • Dated: 12/2/2016 6 M8 x20 Machine Screw x 1 5 19mm Steel Washer x1 4 19mm Nylon Washer x1 Monitor Mount 3 Spring Arm Tray Platform 2 6mm 5mm M6 x18 Machine Screw x 4 7 Monitor/ Tray Arm Leave this screw loose by about 1/8” and insert it through the keyhole slot in the spring arm plate. 4 Phenolic Tray 53580 Machine Screw x4 8 5 53648 Serrated Flange Nut x 4 5mm 9 1 M6 x10 Machine Screw x3 2 of 4 Standing Desk Converter Dual #53873 • Dated: 12/2/2016 6 M6-1 x10 Machine Screw x2 107KPS Wrist Pad A Velcro strip is included for optional use to attach the keyboard to the keyboard tray. 7 12 10 52443 Machine Screw x3 This screw first 52127 M4 Machine Screw x8 11 Monitor Mount 8 9 3 of 4 Standing Desk Converter Dual #53873 • Dated: 12/2/2016 User Guide Tray Tilt & Swing Arm Height Adjustment Left / Right Rotation 90o 90o +65o 0o -30o 90o Vertical Tension Adjustment Spring Arm Tension Adjustment Vertical Adjustment Top of Spring Arm Tight Loose Dual Monitor Tilt Tension Adjustment -5o Wire Management Spring Arm Tension Adjustment Position Adjustment +35o Loosen Knobs to Slide Monitors Left or Right Rotate Adjustment 4 of 4