Transcript
GETTING STARTED This quick start guide is a brief introduction to your Grabba attachment. A detailed installation guide for the Grabba driver and demonstration application is available at www.grabba.com/installationguides. If you need clarification on any topics in this guide, please visit www.grabba.com/support for detailed guides about Grabba technologies, technical specifications, frequently asked questions and other helpful information. If you have any further questions please contact your local Grabba distributor or reseller, visit www.grabba.com/contact-us or email Grabba directly at
[email protected].
QUICK START GUIDE FOR ANDROID
www.grabba.com revision date: 06/14
INSTALLING THE GRABBA DRIVER
STARTING THE GRABBA DRIVER
FOR ANDROID
Installing the Grabba driver with automatic updates using the Google Play store.
• • • •
Open the Google Play store application Search for “Grabba” and select the “Grabba Driver” application. The Grabba Driver will be automatically downloaded and installed on your Android device. Installing from the Google Play store allows for automatic driver updates.
FOR ANDROID
•
Connect the Grabba to your Android device.
•
Open the Grabba Driver application.
•
Press one of the buttons on the side of the Grabba to wake the Grabba and initiate the connection.
•
If your Grabba has charge, the driver will detect your Grabba and ask for permissions to use the Grabba.
•
Accept the prompt and the Grabba driver will display the model, serial and battery charge.
Installing the Grabba Driver without automatic updates
• • •
Open the Settings on your Android device. Go to Security. Under Device Administration, enable installation of apps from sources other than the Play store.
Visit our website at: http://www.grabba.com/downloads/ android/drivers to download the latest version of the Grabba driver for Android. Run the downloaded file to install the application.
The Grabba driver may upgrade the firmware on the Grabba device. Do not unplug the Grabba during this upgrade.
TROUBLESHOOTING
ABOUT YOUR GRABBA You Grabba device can have a mixture of different data capture technologies, which enhances your Android Smartphone. There is also an inbuilt battery that supplies all the Grabba’s power needs regardless of which technologies are included in your Grabba.
If you experience difficulty connecting the Grabba and Android devices or the Grabba software does not recognise the Grabba, please try the following troubleshooting techniques:
Here are some tips to get the most out of your Grabba attachment:
•
Try charging the Grabba for at least 30 minutes.
•
•
Reset the Android Smartphone.
•
Ensure the Android has the Grabba driver installed.
•
To reset the Grabba, first disconnect the Android and any charge or USB cables from the Grabba. Simultaneously hold down both Grabba buttons for at least 30 seconds and the green light on front of the Grabba should come on.
•
When this green light comes on, release the Grabba buttons and the Grabba will reset.
To connect, plug the Android into the Grabba and Press one of the Grabba buttons. This will wake the Grabba and initiate the connection.
•
Be sure to keep the Grabba charged between user sessions. Be sure to charge it at the end of the day.
•
The Grabba and the Android can be charged together (whilst the Android is docked in the Grabba). Simply connect the Grabba DC charger to the Grabba charge socket and both devices will charge.
•
Your Grabba has an Auto-Off feature to conserve power. If this feature is turned on (through the Grabba driver) then the Grabba will go to sleep after a period of inactivity. This can be adjusted via the preferences menu in the Grabba driver.
•
The Grabba will take from 1 - 10 seconds to connect to the handheld upon docking. To connect (or wake from sleep) press one of the Grabba buttons and the Grabba will wake up so it can connect.
•
If you need more help please refer to the Troubleshooting page.
GRABBA KEYBOARD The Grabba Keyboard is a free application available on the Google Play store which replaces the Android system keyboard and allows scanning of data directly into any text field on the Android Smartphone.
instructions to enable the Grabba Keyboard. Check the Grabba connectivity state using the Grabba icon provided on the keyboard.
The Grabba Keyboard application is available on the Google Play store by searching “Grabba”.
Once the Grabba is connected, press one of the Grabba buttons to start the scan. The scans can be configured by pressing the Grabba icon and selecting “Settings for Grabba Keyboard”.
Alternatively the application is also available on our website at: http://www.grabba.com/downloads/android/keyboard-wedge Using the Grabba Keyboard Open the Grabba Keyboard application and follow the
BARCODE READER Depending on the model of your Grabba barcode scanner, it can be used for reading almost any barcode type, including 1D linear codes, 2D stacked and matrix codes, OCR fonts, postal codes and can also capture digital images. • Optimum read range is 4-10 inches. • For small-pitch barcodes, move scanner closer. • Adjust angle to barcode for glossy surfaces if having trouble reading. • Move scanner closer or further away if having trouble reading. • Sometimes you may need to hold Area Imaging 2D Barcode Scanners still while scanning.
This data can be accessed by the keyboard wedge functionality or through the Grabba Software Development Kit.
MAGNETIC STRIPE CARD READER The Grabba Magnetic Stripe Card readers provide high performance decoding with the ability to read badly damaged cards with dual or three track capability. • Use a consistent swipe speed. • Ensure card remains flush against running track through the entire swipe. • Do not change the angle of the card. • Do not swipe it with any curving motion.
This data can be accessed by the keyboard wedge functionality or through the Grabba Software Development Kit.
SIGNATURE CAPTURE
FINGERPRINT READER
Grabba’s signature capture technology utilises a stylus input device on a surface designed to mimic the natural feel of signing on paper.
The Grabba Fingerprint Scanner offers a flexible and cost-effective solution for the fast and secure processing of high quality fingerprint images in a mobile environment.
• Start the capture using a software button or tapping the start area of the signature capture panel. • Sign your signature on the line of the signature panel (note that the captured signature does not appear on the panel). • Stop the capture by using a software button, tapping the stop area of the signature capture, or allowing the capture to time out. • Turn over to review the captured signature on the handheld screen.
Signature data can be accessed, and interacted with, by a software developer through the Grabba Software Development Kit.
• Initiate a fingerprint enrolment using software. • When fingerprint scanner lights up red, place finger on sensor in the centre and straight. • Lift finger off when red light turns off. • Repeat each time fingerprint scanner lights up, following on screen instructions for finger placement and pressure.
Fingerprint data can be accessed, and interacted with, by a software developer through the Grabba Software Development Kit.
CONTACT SMARTCARD READER The Smart Card Reader is compatible with synchronous memory cards and microcontroller cards supporting both read and write applications. • Insert smartcard into the right hand side slot of the Grabba device. • Insert with chip on the left of the card facing upwards, as shown.
Card data can be accessed, and interacted with by, a software developer through the Grabba Software Development Kit.
MACHINE READABLE ZONE READER
PASSPORT / VISA / IDENTITY CARDS
This Grabba reads machine readable passports (MRP) and Visas (MRV) OCRB encoded cards such as the US Resident Alien card, European National ID cards and travel cards conforming to ICAO Document 9303 Reads APACS debit and credit documents (APACS standards 3.1 and 3.2), plus mixed E13B and OCRB fonts. • Use a consistent swipe speed. • Hold the passport / visa with machine readable text facing upwards. • Ensure the passport / visa remains flush with the running track through entire swipe. • Do not change the angle of the passport / visa. • Do not swipe with any curving motion.
RFID / CONTACTLESS / PROXIMITY READER Grabba supports a large range of different RFID tags and contactless cards. These include low frequency (125-134.2 kHz) tags and fobs including ISO standard and HID Proximity tags, as well as high frequency (13.56MHz) contactless cards including Mifare, I-Code, ISO15693, ISO14443A/B as well as HID iCLASS credentials. • Trigger scanner with assigned trigger button. • Place credential in close proximity to reader. • Some tags may need to be in contact with Grabba housing surface. • This data can be accessed by the keyboard wedge functionality.
Some data can be accessed by the keyboard wedge functionality. Further RFID/Proximity card data can be accessed, and interacted with, by a software developer through the Grabba Software Development Kit.
WARRANTY & DISCLAIMER The Grabba devices are manufactured by Grabba International Pty Ltd. at its Brisbane, Australia facility. The Grabba devices have a 12-month warranty from the date of purchase. Grabba International warrants and represents that all Grabba devices are free of all defects in material, workmanship and design, and have been produced and labelled in compliance with all applicable laws, regulations and ordinances pertaining to their production and labelling. This warranty is expressly limited to repair, replacement of product or refund of product price at the sole discretion of Grabba International. Equipment for repair must be returned to the Grabba International facility in Brisbane, Australia or a Grabba authorised repair centres. To do this, contact Grabba International’s service/ repair department to obtain a Return Authorisation (RA) number. CONSEQUENTIAL DAMAGES RELATING TO DATA LOSS, SUBSEQUENT EQUIPMENT FAILURE, AND/ OR EQUIPMENT DAMAGE ETC IS EXPRESSLY EXCLUDED FROM THIS WARRANTY AND GRABBA INTERNATIONAL ACCEPTS NO LIABILITY FOR ANY LOSS OR DAMAGE INCURRED WHAT-SOEVER. In the event that it is determined the equipment failure is covered under this warranty, Grabba International shall, at its sole discretion, repair the product or replace the product with a functionally equivalent unit and return such repaired or replaced product without charge for service or return freight, whether distributor, dealer, or retail consumer. This limited warranty does not extend to any product which, in the sole judgment of Grabba International, has been subjected to abuse, misuse, neglect, improper installation, accidental damage, nor any damage due to use or misuse produced from integration of the product into any mechanical, electrical or computer system. The warranty may be void if the case of the product is opened by anyone other than Grabba International’s repair department or authorised repair centres. To read the full warranty statement go to www.grabba.com/warranty.
This data can be accessed by the keyboard wedge functionality or through the Grabba Software Development Kit.
