Transcript
WIN NA ®
solutions
forms
WIN NA ®
light
solutions
SPECIFICATIONS ®
WIN NA solutions
forms
®
forms
light
WIN NA
STEP 11
Project:
SQUARE
Qty:
forms
light
WIN NA solutions
forms
light
LED module with concealed optic
Integral driver
WIN NA 4.60"
®
Ribbed design with matte black finish to reduce glare
solutions
GREEN CMYK: C - 50 M-0 Y - 100 K - 25
GREY CMYK: C-0 M-0 Y-0 K - 50
Construction BLACK CMYK: WHITE CMYK: C - 0 Die-cast housing C - 0 with solid aluminum, brass, or M-0 M-0 Step11 is a surface mount Y - 0 stainless steel Y -faceplate. 0 K - 100 0 step light thatK -mounts over a Steel City ‘CX’ series or
GREEN RGB: R - 109 G - 157 B - 49
GREY RGB: R - 147 G - 149 B - 152
BLACK RGB: fasteners. R - 35 G - 31 B - 32
Steel City 'CX' series or equivalent (by others)
®
4.60"
3.50" Steel City 'CX' series or equivalent (by others)
CROSS SECTION
forms
color
Accepted color combinations
®
solutions
light
18" L Approx 10'-0"
M S Approx Approx 4'-0" 3'-0" Grid in 1' increments
0.1 1.0 5.0 10.0
0.1 1.0 5.0 10.0
equivalent junction box (by others) with two visible WHITE RGB: R - 255 G - 255 B - 255
Source Light source is a single powerful LED available in five white color temperatures & six colored LED choices. Optics Concealed optic is available in three light distribution patterns. Short for narrow corridors, Medium for wide corridors, and Long for large area illumination. Electrical Integral electronic drivers are multi volt input 120277V, & available in standard or 0-10V dimming. Non-dimming units consume 2.5W (350mA) or 3.5W (700mA). Dimming units consume 4W (350mA only).
Typical Distribution Based on 700mA WHT30K
Short
light
Type:
light
WIN NA solutions
forms
STEP
0.1 1.0 5.0 10.0
Medium
Environment ETL / cETL listed dry location or optional wet location.
Long
CATALOG NUMBER
Finish Recessed surfaces have a ribbed design with matte black finish to reduce glare. Faceplates are available in five metal finishes with protective clear coat or one of seven polyester powder coat painted finishes. A primer only finish is also available for field painting. Warranty 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/ CustomerResources/Terms_and_conditions.aspx Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Assembled in America (Buy American Act Compliant) Performance Data Dist.
Lumens
Lm/W
Short 50 14.1 Medium 60 17.3 Long 76 21.8 Performance data based on WHT30K non dimming. Use .5 lumen multiplier for 350mA drive current.
See page 3 for lighting facts labels.
Example: STEP11 SQU INT M LST1A 700MA WHT30K MVOLT SGB
Series STEP11
Faceplate Shape SQU Square
Step 11
Voltage
Environment WL INT
Driver
MVOLT Multi Volt 120V thru 277V
(Blank) Standard Driver DMD Dimming Driver (350mA only)
Distribution S M L
Wet Location Interior
Short Medium Long
Source
Drive Current
LST1A LED Step 1
Color Temperature
350mA 350 Milliamps 700mA 700 Milliamps
WHT27K WHT30K WHT35K WHT40K WHT50K AMB
White (27K) White (30K) White (35K) White (40K) White (50K) Amber1
Finish BA BB BSS PB PSS
BLU GRN RED CYN RDO
Blue Green Red Cyan Red-Orange
Special Brushed Aluminum Brushed Brass Brushed Stainless Steel Polished Brass Polished Stainless Steel
ABP BBP LBPS LSP PGP
Antique Brass Paint Brushed Brass Paint Light Bronze Paint Smooth Light Silver Pale Gold
SGB SGW PRM CPF* CMF*
MOD2 Modification / Consult Factory
Semi Gloss Black Semi Gloss White Primer Only Custom Paint Finish Custom Metal Finish
Describe Modification:
Notes 1 2
350mA only. Available by modification only. Consult factory.
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com © 2015-2017 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 06/29/17 STEP11_SQUARE
1
WIN NA ®
solutions
forms
WIN NA ®
light
solutions
SPECIFICATIONS ®
forms
STEP
WIN NA
light
Type:
STEP11 solutions
forms
light
Project:
SQUARE WIN NA ®
solutions
forms
Qty:
light
WIRING & DIMMING
color
Accepted color combinations POWER SUPPLY / DIMMING ® Dimming drivers require a 0-10V fluorescent-type dimming control.GREY CMYK: BLACK CMYK: GREEN CMYK:
WIN NA solutions
forms
light
C - 50 M-0 Y - 100 K - 25
C-0 M-0 Y-0 K - 50
C-0 M-0 Y-0 K - 100
WHITE CMYK: C-0 M-0 Y-0 K-0
GREEN RGB: R - 109 G - 157 B - 49
GREY RGB: R - 147 G - 149 B - 152
BLACK RGB: R - 35 G - 31 B - 32
WHITE RGB: R - 255 G - 255 B - 255
Read all instructions before installation. Do not make live connections!
WIN NA ®
NON-DIMMING INSTALLATIONS solutions forms light Connect STEP WHITE wire to power NEUTRAL. Connect STEP BLACK wire to power HOT. ® Connect STEP GREEN wire to power GROUND.
WIN NA light
WHITE BLACK GREEN
WHITE BLACK GREEN
To other STEP fixtures WHITE BLACK GREEN
forms WHITE BLACK GREEN
WHITE BLACK GREEN
or 277V
WHITE BLACK GREEN
solutions 120V
DIMMING INSTALLATIONS The integral dimming driver is designed to the 0-10V IEC dimming specification 60929 and is compatible with common 0-10V dimmers and dimming systems. Do NOT connect line voltage to dimming input wires. Connect STEP WHITE wire to power NEUTRAL. Connect STEP BLACK wire to power HOT. Connect STEP VIOLET wire to POSITIVE INPUT of Dimming Control. Connect STEP GREY wire to NEGATIVE INPUT of Dimming Control.
WHITE BLACK GREEN
WHITE BLACK GREEN
WHITE BLACK GREEN
VIOLET GREY
VIOLET GREY
VIOLET GREY
To other STEP fixtures VIOLET GREY
VIOLET GREY VIOLET GREY
0-10V (+) Dimmer (-)
To other STEP fixtures WHITE BLACK GREEN
WHITE BLACK GREEN WHITE BLACK GREEN
120V or 277V
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com © 2015-2017 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 06/29/17 STEP11_SQUARE
2
WIN NA ®
solutions
forms
light
SPECIFICATIONS ®
WIN NA
WIN NA ®
solutions
forms
STEP
light
Type:
STEP11 solutions
forms
light
Project:
SQUARE WIN NA ®
solutions
forms
Qty:
light
LIGHTING FACTS
WIN NA
color Accepted color combinations
®
solutions
forms
light
WIN NA
GREEN CMYK: C - 50 M-0 Y - 100 K - 25
GREY CMYK: C-0 M-0 Y-0 K - 50
BLACK CMYK: C-0 M-0 Y-0 K - 100
WHITE CMYK: C-0 M-0 Y-0 K-0
GREEN RGB: R - 109 G - 157 B - 49
GREY RGB: R - 147 G - 149 B - 152
BLACK RGB: R - 35 G - 31 B - 32
WHITE RGB: R - 255 G - 255 B - 255
®
solutions
forms
light
WIN NA ®
solutions
forms
light
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com © 2015-2017 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 06/29/17 STEP11_SQUARE
3
