Preview only show first 10 pages with watermark. For full document please download

Stereo Audio I/r Remote Volume Controller Irm-a2

   EMBED

Share

Transcript

IRM-A2 Stereo Audio I/R Remote Volume Controller • One hundred step attenuation from 0 to -60dB • Manual gain adjustment from 0 to -12dB • Very high audio quality • Set levels are held in flash memory • On-board I/R remote receiver and connection for an external I/R input • User-set system address to allow use of 4 IRM-A2 in a single installation • Dual mono channel use possible due to low cross-talk • On-board mains linear power supply corvo TECHNOLOGY IRM-A2 corvo corvo Technical Specifications Audio Bandwidth: 10 to 40,000 Hz, +/-0.1dB THD + Noise Crosstalk : S/N ratio: Input impedance: Output impedance: Manual gain range: Remote attenuation range: Maximum input signal level: 0.018 % (1Vrms, 1KHz) > 68 dB at 1 KHz 91 dB, max output 20 KOhms, unbalanced 600 Ohms unbalanced 0 to -12 dB 0 to -60dB, 100 steps 19.8Vp-p (6.8Vrms) Audio connectors: Cinch/RCA Power Supply: 220-240V / 50H-60 Hz / 5VA Case dimensions: 150 x 100 x 31 mm Mass : 490 Grs. Operating Temperature Range : 0° à 40°C (32° to 104° F) Storage Temperature Range : -20° to 60°C (-4° to 140° F) We reserve the right to modify technical specifications without prior notice Product References IRM-A2 IRR-31xx Stereo audio I/R remote volume controller I/R remote control relay receiver (option) corvo TECHNOLOGY