Transcript
GIRBAU, S.A. STI-22 Parts Manual
Girbau SA Carreta Manlleu, KM1 Vic Barcelona, Spain 54380 Telephone: 3493 886 1100 / Fax: 3493 886 0785 e-mail:
[email protected]
Part No. 450583
Retain This Manual In A Safe Place For Future Reference This product embodies advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important For your convenience, log the following information: DATE OF PURCHASE ___________________________ DISTRIBUTOR’S NAME Serial Number(s)
STI-22
MODEL NO. __________________________________________
__________________________________________________________________________________
________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the Girbau SA factory. When ordering replacement parts from the factory, you can FAX your order to Girbau SA at 3493 886 0785 or telephone your order directly to the Girbau SA Parts Department at 3493 886 1100. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents Phase 7 Non-Coin Control Door Assembly ........................................................................................ 3 Phase 7 Coin Control Door Assembly ................................................................................................ 4 Phase 6 Non-Coin Control Door Assembly ........................................................................................ 5 Phase 5 Coin Control Door Assembly ................................................................................................ 6 Phase 7 Non-Coin Microprocessor Control Panel Assembly ................................................................ 7 Phase 7 Coin Microprocessor Control Panel Assembly ........................................................................ 8 Phase 6 Non-Coin Microprocessor Control Panel Assembly ............................................................... 9 Phase 5 Coin Microprocessor Control Panel Assembly ...................................................................... 10 Dual Timer “Tap Touch” Controls ...................................................................................................... 11 Phase 7 Microprocessor Control Box Assembly ............................................................................... 12 Phase 6 Non-Coin Microprocessor Control Box Assembly................................................................ 13 Phase 5 Coin and Dual Timer Control Box Assembly ......................................................................... 14 Coin Vault Assembly ....................................................................................................................... 15 Front Panel Assembly ..................................................................................................................... 16 Main Door “Steel” Assembly ........................................................................................................... 17 Main Door Switch Assembly ........................................................................................................... 18 Basket (Tumbler)/Support Assemblies .............................................................................................. 19 Lint Drawer/Lint Drawer Switch Assemblies with Replaceable Screen ................................................ 20 Lint Drawer/Lint Drawer Switch Assemblies with Permanent Screen ................................................... 21 Idler Bearing Assembly .............................................................................................................. 22, 23 Basket (Tumbler) Bearing Assembly ............................................................................................ 24, 25 Non-Reversing Motor Mount Assembly ...................................................................................... 26, 27 Reversing Motor Mount Assembly .............................................................................................. 28, 29 Sensor Bracket Assemblies ........................................................................................................ 30, 31 Direct Spark Ignition Burner Assembly ........................................................................................ 32, 33 Hot Surface Ignition Gas Burner Assembly ................................................................................... 34, 35 Electric Oven Assembly.............................................................................................................. 36, 37
Rear Electric Panel Assembly ...................................................................................................... 38, 39 Steam Coil/Mechanical Steam Damper Assembly ......................................................................... 40, 41 Steam Coil/Air-Operated Steam Damper Assembly ..................................................................... 42, 43 Fire Suppression System Piping Assembly ........................................................................................ 44 Fire Suppression System Sensor Probe Assembly ............................................................................. 45 Outer Top/Back Guard Assemblies .................................................................................................. 46 Transformer Listing ....................................................................................................................... 47 Rear Electric Panel Assembly Listing ........................................................................................... 48, 49 Electrical Oven Component Application Chart ................................................................................... 50 Additional Parts Available ................................................................................................................ 51
Phase 7 Non-Coin Control Door Assembly
Illus. No.
Part No.
Qty.
1
884098
1
2 3
150217 150317 150318 117604 154011 102603 102502 102601 112371
2 2 1 6 2 1 1 1 1
4 5 6 7 8 9 450583-3
Description White Control Door Assembly (includes illus. nos. 1 and 4) #10-32 x 3/4” Phillips Pan Head Machine Screw #10-16 x 3/4” TORX + BTN, Type 1 25 IP TORX + Bit (for removal of TORX head screw) Noise Suppressor Tape (sold by the foot) #10-32 Multi-Thread U-Nut Control Door Rod Catch Control Door Support Rod Control Door Rod Retainer Clip Girbau Logo 3493 886 1100 / www.girbau.es
3
Phase 7 Coin Control Door Assembly
Illus. No.
Part No.
Qty.
1
884099
1
2
160015 160104 150317 150318 117604 160032 102603 102502 102601 112371
1 1 2 1 6 1 1 1 1 1
3 4 5 6 7 8 9 4
Description White Control Door Assembly (includes illus. nos. 1 through 4) High Security Lock with Key MK-100 Key ONLY #10-16 x 3/4” TORX + BTN, Type 1 25 IP TORX + Bit (for removal of TORX head screw) Noise Suppressor Tape (sold by the foot) 1” Straight Cam Control Door Rod Catch Control Door Support Rod Control Door Rod Retainer Clip Girbau Logo Girbau, S.A.®
450583-3
Phase 6 Non-Coin Control Door Assembly
Illus. No.
Part No.
Qty.
1
883273
1
2 3 4 5 6 7 8 9
150217 150317 117604 154011 102603 102502 102601 112371
2 2 6 2 1 1 1 1
450583-3
Description White Control Door Assembly (includes illus. nos. 1 and 4) #10-32 x 3/4” Phillips Pan Head Machine Screw #10-16 x 3/4” TORX + BTN, Type 1 Noise Suppressor Tape (sold by the foot) #10-32 Multi-Thread U-Nut Control Door Rod Catch Control Door Support Rod Control Door Rod Retainer Clip Girbau Logo 3493 886 1100 / www.girbau.es
5
Phase 5 Coin Control Door Assembly
Illus. No.
Part No.
Qty.
1
883684
1
2
160015 160104 150317 150318 117604 160060 102603 102502 102601 112371
1 1 2 1 6 1 1 1 1 1
3 4 5 6 7 8 9 6
Description White Control Door Assembly (includes illus. nos. 1 and 4) High Security Lock with Key MK-100 Key ONLY #10-16 x 3/4” TORX + BTN, Type 1 25 IP TORX + Bit (for removal of TORX head screw) Noise Suppressor Tape (sold by the foot) 1-1/2” Cam Control Door Rod Catch Control Door Support Rod Control Door Rod Retainer Clip Girbau Logo Girbau, S.A.®
450583-3
Phase 7 Non-Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3
112571 850984 887004
1 1 1
887001
1
150005 153010 136016 136097
2 2 1 1
4 5 6 7 450583-3
Description Phase 7 Non-Coin Keyboard Phase 7 Non-Coin Microprocessor Controller (computer) Panel Only Phase 7 Non-Coin Microprocessor Controller (computer) with Fire Suppression System (for models mfd. as of December 3, 2003) Phase 7 Non-Coin Microprocessor Controller (computer) with Fire Suppression System (for models mfd. prior to December 3, 2003) #6-32 x 1/4” Phillips Round Head Machine Screw #6 Star Washer 5-Amp Fuse 500-mA Fuse 3493 886 1100 / www.girbau.es
7
Phase 7 Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3
137250 137270 887011
1 1 1
887007
1
887013
1
887010
1
112575 153010 150005 152102 824363 830159 136111
1 1 4 1 1 1 1
4 5 6 7 8 9 10 8
Description Phase 7 Coin Ribbon Cable 16” x 1” Large Character Display Phase 7 Coin Board (with no Fire Suppression System) (for models mfd. as of January 26, 2004) Phase 7 Coin Board (with no Fire Suppression System) (for models mfd. prior to January 26, 2004) Phase 7 Coin Board (with Fire Suppression System) (for models mfd. as of January 26, 2004) Phase 7 Coin Board (with Fire Suppression System) (for models mfd. prior to January 26, 2004) Phase 7 Keypad #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw M3 Metric Hex Nut Phase 7 Coin Control Panel Phase 7 Programmable Euro/Coin Acceptor Assembly 5-Amp Fuse Girbau, S.A.®
450583-3
Phase 6 Non-Coin Microprocessor Control Panel Assembly
Illus. No. 1
2
3 4 5 6 7 8 9 450583-3
Part No.
Qty.
112537 112276 112275
1 1 1
112277
1
112278
1
881745 881747
1 1
881746
1
137123 137122 150005 153010 150309 136048 136017 136019
1 1 3 3 1 1 1 1
Description Phase 6 Non-Coin Keyboard Non-Coin Stick-On Labels (English Only)...Not Illustrated 3-Language Non-Coin Stick-On Labels (Spanish, Italian, and Hebrew)...Not Illustrated 3-Language Non-Coin Stick-On Labels (English, Spanish, and Hebrew)...Not Illustrated 5-Language Non-Coin Stick-On Labels (Italian, Dutch, French, German, and Chinese)...Not Illustrated Phase 6 Microprocessor Controller (computer) Panel Only Phase 6 Non-Coin Non-Reversing Computer Panel Assembly Complete (includes illus. nos. 1 through 5 and 7 through 9) Phase 6 Non-Coin Reversing Computer Panel Assembly Complete (includes illus. nos. 1 through 5 and 7 through 9) Phase 6 Non-Coin Non-Reversing Microprocessor Controller (computer) Only Phase 6 Non-Coin Reversing Microprocessor Controller (computer) Only #6-32 x 1/4” Phillips Round Head Machine Screw #6 Star Washer #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-Amp (Slo-Blo) Fuse 3.15-Amp (fast acting) Fuse 1-Amp (fast acting) Fuse 3493 886 1100 / www.girbau.es
9
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1 2
112526 883582
1 1
883581
1
883580 883579 150309 137213 824998 153010 150005 125103 125121 137056 137023 137021 880772 122800 136048
1 1 1 1 1 2 2 1 1 1 1 3 1 1 1
3 4 5 6 7 8 9 10
11
Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, and 4 through 6) Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, and 4 through 6) Coin Control Panel Only Coin Control Panel Only with Battery Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller Only Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw 0.882 Token Coin Acceptor with Optic Switch 0.800 Token Coin Acceptor with Optic Switch Optic Switch Only Optic Switch Connector Only Microprocessor Socket Only Single Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number of controller (computer). 10
Girbau, S.A.®
450583-3
Dual Timer “Tap Touch” Controls
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8
824298 824299 824175 122301 131932 120730 151000 882903
1 1 1 1 3 1 6 1
9 10 11 12 13 14 15
850392 153010 152000 150108 150110 112563 124104 124105
2 2 2 4 1 1 1
450583-3
Description 15 Minute Timer - 24 VAC 60 Minute Timer - 24 VAC Red Pilot Light - 24 VAC “Tap Touch” Switch 24V SPST Relay (for electric models Only) 30-Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel Only #6 Star Washer #6-32 Hex Nut #8-32 x 1/2” Phillips Pan Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer 3493 886 1100 / www.girbau.es
11
Phase 7 Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1 2 3 4
122681 122676 122646 122683
1 1 1 1
5 6 7
122640 122706 122669
1 * *
* 12
Description 10-Pin Connector 8-Pin Connector 2-Pin Connector 6-Pin Connector (for use with non-coin microprocessor Only) 9-Pin Connector Socket Terminal Only Female Crimp Terminal
As needed. Girbau, S.A.®
450583-3
Phase 6 Non-Coin Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5
122648 122646 122640 122644 122706 122801
1 1 1 1 * 1
*
Description 4-Pin Connector 2-Pin Connector 9-Pin Connector 6-Pin Connector Socket Terminal Only Pin/Socket Extraction Tool...Not Illustrated
As needed.
450583-3
3493 886 1100 / www.girbau.es
13
Phase 5 Coin and Dual Timer Control Box Assembly
Illus. No.
Part No.
Qty.
1 2
122641 122706 122801
1 * 1
* 14
Description 15-Pin Microprocessor Controller (computer) Connector Socket Terminal Only Pin/Socket Extraction Tool...Not Illustrated
As required. Girbau, S.A.®
450583-3
Coin Vault Assembly
Illus. No.
Part No.
Qty.
1
884050
1
823143 802112
1 1
802117 802110
1 1
4
802115 160028 875061 160105* 802020
1 1 1 1 1
5 6 7 8
152014 102502 102601 102603
4 1 1 1
2 3
*
Description Phase 7 Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Phase 7 Microprocessor Coin Vault Only Phase 5 Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Phase 5 Microprocessor Coin Vault Only Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Non-Microprocessor Coin Vault Only Cam for 1/4 Turn Lock Only 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key Only 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 4) 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch
Specify key number when ordering.
450583-3
3493 886 1100 / www.girbau.es
15
Front Panel Assembly
Illus. No.
Part No.
Qty.
1
883272
1
882958
1
3
150313 150318 --------
11 1 1
4 5
882970 881987
1 1
6 7 8 9
154215 123500 123506 123521
2 1 1 1
10
123517
1
2
16
Description White Front Panel Assembly (for models mfd. with “EMERGENCY STOP” [E-Stop] button) (includes illus. nos. 1 and 4 through 6) White Front Panel Assembly (for models mfd. without “EMERGENCY STOP” [E-Stop] button) (includes illus. nos. 1 and 4 through 6) #10-16 x 1/2” TORX + BTN, Type 1 25 IP TORX + Bit (for removal of TORX head screw) Main Door Hinge (refer to Main Door “Steel” Assembly on page 17) Front Panel Trim Assembly Friction Door Latch Assembly (includes illus. nos. 5 and 6) 5/32” Pop Rivet “EMERGENCY STOP” Push/Pull Button “EMERGENCY STOP” Nameplate Normally Closed Contact Block with Mounting Latch (includes illus. nos. 9 and 10) Normally Closed Contact Block Girbau, S.A.®
450583-3
Main Door “Steel” Assembly
Illus. No.
Part No.
Qty.
1
883274
1
2 3
102354 170730 881440
1 1 1
4 5 6
150445 153031 881441
2 1 1
7 8
150445 102211 170730 881806 151010 150120 883275 881806
2 1 1 3 1 1 1 3
9 10 11 12 13 450583-3
Description White Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 13) Door Gasket Clear Gasket Adhesive (10.3 oz. cartridge) White Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer White Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) 1/4-20 x 3/4” Black Cap Head Setscrew 20-7/16” Door Glass Clear Glass Adhesive (10.3 oz. cartridge) 1/4-20 White Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw White Small Cold Rolled Steel Door Handle 1/4-20 White Free Spin Wash Nut 3493 886 1100 / www.girbau.es
17
Main Door Switch Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
150006 152013 153010 137005 122636 881213 881216
2 2 2 1 2 1 1
7
150301
2
18
Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Door Switch Flag Terminal White Main Door Switch Housing Only White Main Door Switch Housing Complete (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16” Phillips Pan Head TEK Screw Girbau, S.A.®
450583-3
Basket (Tumbler)/Support Assemblies
Illus. No.
Part No.
Qty.
1*
800736 800757
1 1
2
4
150313 150429 301426 301425 150500
40 1 2 2 1
5 6 7 8 9 10 11 -12
100903 153004 800616 152005 153005 153004 116001 401010 115986
4 4 1 4 4 4 1 1 1
3
*
Description Stainless Steel Basket (tumbler) Only (without felt collar) Stainless Steel Basket (tumbler) and Support Assembly (includes illus. nos. 1 through 10) #10-16 x 1/2” TORX + BTN, Type 1 TORX Screw Hand Driver Stainless Steel Basket (tumbler) Rib Only (low rib) Stainless Steel Tapered Basket (tumbler) Baffle Rib Only (high rib) 5/16-18 x 3/4” Socket Button Head Screw (for models mfd. prior to January 18, 2002) 3/8-16 x 38-1/2” Tie Rod 3/8” Flat Washer Basket (tumbler) Support Only 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar Only #847 Adhesive for Felt Collar (5.0 oz. tube) 1/4” x 2” Felt Basket (tumbler) Pad (for models mfd. as of January 18, 2002)
Felt collar is not included and must be ordered separately.
450583-3
3493 886 1100 / www.girbau.es
19
Lint Drawer/Lint Drawer Switch Assemblies with Replaceable Screen
Illus. No.
Part No.
Qty.
1
883757
1
2 3 4 5 6
117605 108225 122116 122605 122701 122801 818087
5 1 1 1 or 2 4 1 1
833229
1
304136 150301 122700 122604
1 2 * 1 or 2
7
8 9 10
Description White Lint Drawer Assembly (includes illus. nos. 1 through 3) Neoprene Sponge Tape (sold by the foot) Lint Screen Assembly Lint Drawer Switch 4-Pin Connector (female) Socket Terminal Only Pin/Socket Extraction Tool...Not Illustrated Lint Drawer Switch Box Assembly (for Phase 7, Phase 5 and Dual Timer models Only) (includes illus. nos. 4 through 7) Lint Drawer Switch Box Assembly (for Phase 6 models Only) (includes illus. nos. 4 through 7) Lint Drawer Switch Box Only #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal Only 4-Pin Connector (male)
* as required 20
Girbau, S.A.®
450583-3
Lint Drawer/Lint Drawer Switch Assemblies with Permanent Screen
Illus. No.
Part No.
Qty.
1
883704
1
2 3 4 5
117604 122116 122605 122701 122801 818087
7 1 1 or 2 4 1 1
833229
1
304136 150301 122700 122604
1 2 * 1 or 2
6
7 8 9 *
Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Noise Suppressor Tape (sold by the foot) Lint Drawer Switch 4-Pin Connector (female) Socket Terminal Pin/Socket Extraction Tool...Not Illustrated Lint Drawer Switch Box Assembly (for Phase 7, Phase 5 and Dual Timer models Only) (includes illus. nos. 3 through 7) Lint Drawer Switch Box Assembly (for Phase 6 models Only) (includes illus. nos. 3 through 7) Lint Drawer Switch Box Only #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal 4-Pin Connector (male)
As required.
450583-3
3493 886 1100 / www.girbau.es
21
Idler Bearing Assembly
22
Girbau, S.A.®
450583-3
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1
100100
1
100108
1
101129 100105
1 1
100112
1
4 5 6
154301 100705 882576
2 1 1
7 8 9 10 11 12
150617 153005 153004 801009 152004 150509
2 2 2 1 1 1
2 3
450583-3
Description 5L-660 V-Belt (basket [tumbler] to idler) For Non-Reversing Models Only 5L-680 V-Belt (basket [tumbler] to idler) For Reversing Models Only 9” x 2-1/2” Compound Pulley 4L-520 V-Belt (idler to motor) For Non-Reversing Models Only 4L-610 V-Belt (idler to motor) For Reversing Models Only 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt
3493 886 1100 / www.girbau.es
23
Basket (Tumbler) Bearing Assembly
24
Girbau, S.A.®
450583-3
Basket (Tumbler) Bearing Assembly
Illus. No.
Part No.
Qty.
1 2 3 4
880220 153025 152050 882544
1 4 4 1
883387
1
882545
1
882542 880202 880779
1 1 1
150601 153004 153004 153005 152005 154326 152004 150621 153002 153004 150501 102120 883386 824807 100724 100735 101100 101118 101110 100100
2 2 2 2 2 2 2 2 4 6 4 1 1 1 1 1 1 1 1 1
100108
1
150610 152004
2 2
5
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
23 24
450583-3
Description 1-3/4” Flange Bearing 9/16” Lock Washer 9/16-12 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 17, 23, and 24) For Phase 5 and Dual Timer Models Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 18, 23, and 24) For Phase 7 Models Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 18, 23, and 24) For Phase 6 Models Pillow Block Bearing Platform Only 1-3/8” Pillow Block Bearing 1-3/8” Pillow Block Bearing (for microprocessor models with optional rotational sensor) 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-24 x 3/8” Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt 5/16” Lock Washer 3/8” Flat Washer 5/16-18 x 3/4” Tap Bolt Sintered 8 Magnet Rotational Sensor Assembly for Phase 7 Microprocessor Models Rotational Sensor Assembly for Phase 6 Microprocessor Models Shaft Key (for non-reversing models Only) Shaft Key (for reversing models Only) 18” Pulley (for non-reversing models Only) 18-3/4” Pulley (for reversing models Only) 1” Taper Lock Bushing (for reversing models Only) 5L-660 V-Belt (basket [tumbler] to idler) For Non-Reversing Models Only 5L-680 V-Belt (basket [tumbler] to idler) For Reversing Models Only 5/16-18 x 1-1/2 Allen Setscrew 5/16-18 Hex Nut
3493 886 1100 / www.girbau.es
25
Non-Reversing Motor Mount Assembly
Illus. No.
Part No.
Qty.
1 2 3
100105 100705 101132
1 1 1
101133
1
150501 153002 153001
4 4 4
4 5 6 26
Description 4L-520 V-Belt (motor to idler) 3/16” x 3/16” x 1-3/8” Key 5/8” x 2” Motor Pulley (for 60 Hz models Only) 5/8” x 2-1/4” Motor Pulley (for 50 Hz models Only) 5/16-18 x 3/4” Tap Bolt 5/16” Lock Washer 5/16” Flat Washer Girbau, S.A.®
450583-3
Non-Reversing Motor Mount Assembly (continued)
Illus. No.
Part No.
Qty.
7
100069 100068 122701 122801 137030 152004 153002 153001 117604 154000 850017
1 1 8 1 1 4 4 4 4 4 1
817029
1
817074
1
817080*
1
883271*
1
153050 100604 100702 153050 152006 120200 100007*
3 1 1 1 2 1 1
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 *
Description 3/4 hp 120-230v 1ø (60 Hz models Only) 3/4 hp 240v 1ø (50 Hz models Only) Socket Terminal Only Pin/Socket Extraction Tool...Not Illustrated 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount Only with Gasket (includes illus. no. 13) 3/4 hp 120/230v 1ø 60 Hz Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 3/4 hp 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1/2 hp 208/230/380/460v 3ø 60 Hz Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2 hp 208/230/380/460v 3ø 50 Hz Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2” S.A.E. Flat Washer 12-1/2” Impellor with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” x 90° Connector 1/2 hp 208/230/380/460v 3ø 50/60 Hz Motor (56Z frame)
Specify voltage when ordering.
450583-3
3493 886 1100 / www.girbau.es
27
Reversing Motor Mount Assembly
28
Girbau, S.A.®
450583-3
Reversing Motor Mount Assembly
Illus. No.
Part No.
Qty.
1 2 3
100112 100701 101132
1 1 1
101133
1
120200 181003 150501 153002 153001 100007 120200 150501 153002 153001 154000 152004 153002 153001 850070 803802*
1 1 4 4 4 1 1 4 4 4 8 7 4 4 1 1
803803*
1
117604 153050 100702 100604 153050 152006
4 1 1 1 2 2
4 5* 6 7 8 9* 10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 *
Description 4L-610 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2” Motor Pulley (for 60 Hz models Only) 5/8” x 2-1/4” Motor Pulley (for 50 Hz models Only) 3/8” x 90° Connector 1/2 hp 208/230/380/460v 3ø 50/60 Hz Motor (56Z frame) 5/16-18 x 3/4” Tap Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 hp 208/230/380/460v 3ø 50/60 Hz Motor (56Z frame) 3/8” x 90° Connector 5/16-18 x 3/4” Tap Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 Tinnerman Nut 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount Only Motor Mount Assembly Complete for 60 Hz Models Only (includes illus. nos. 2 through 14 and 18 through 24) Motor Mount Assembly Complete for 50 Hz Models Only (includes illus. nos. 2 through 14 and 18 through 24) Noise Suppressor Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 12-1/2” Impellor with 1/2” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut
Specify voltage when ordering.
450583-3
3493 886 1100 / www.girbau.es
29
Sensor Bracket Assemblies
30
Girbau, S.A.®
450583-3
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
1
880251
1
2 3 4 5 6 7 8 9 10
130103 153010 152000 121028 122701 122605 154007 150005 817046
1 2 2 2 4 1 2 2 1
11 12 13 14 15 16 17 18 19 20 21 22 23 24
322214 122604 122700 150301 150005 130111 130100 130103 130101 153010 152000 882535 121028 122701 122605 882534
1 1 4 2 5 1 1 1 1 5 5 1 4 4 1 1
25
882536
1
322062 122604 122700 122801 150301
1 1 4 1 2
26 27 28
450583-3
Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Hi-Limit Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal Socket Terminal 4-Pin Connector (female) 1/4” Push On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Microprocessor Sensor Bracket Only 4-Pin Connector (male) Pin Terminal #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° Thermostat 150° Thermostat 225° Hi-Limit Thermostat 180° Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper Insulated Terminal Socket Terminal 4-Pin Connector (female) Sensor Bracket Harness Assembly (includes illus. nos. 22 through 24) Noncomputer Sensor Bracket Assembly Complete (includes illus. nos. 14 through 25) Universal Sensor Bracket Only 4-Pin Connector (male) Pin Terminal Pin/Socket Extraction Tool...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw
3493 886 1100 / www.girbau.es
31
Direct Spark Ignition Burner Assembly
32
Girbau, S.A.®
450583-3
Direct Spark Ignition Burner Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
809307 128941 817027 150309 141105 150108 152013 151001 140819* 140804* 141232 318700 150300 128933 883255 141317 142809 850858 817174**
1 1 1 5 3 3 2 3 3 3 1 2 9 1 1 1 1 1 1
817207**
1
883196 142935 319704 150005 152013 154004 130201 802799 150303 122200 105500 319202 154002
1 1 1 2 2 1 1 1 2 1 1 1 1
10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28
Description Ignitor Probe Assembly CE Direct Spark Ignition Module (3 tries) Direct Spark Ignition Module Mounting Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Large Tube Burner #8-32 x 1/2” Phillips Pan Head Machine Screw #6-32 Hex Nut #8-32 Pal Nut #30 Burner Orifice (natural gas) #48 Burner Orifice (liquid propane gas) 1/2” Direct Spark Ignition Manifold (3-port) Pipe Bracket (bent) #10-16 x 1/2” Hex Washer TEK Screw CE Gas Valve (natural gas) CE 1/2” Liquid Propane Gas Valve 1/2” Bronze Union Elbow 1/2” x 29-1/8” Pipe Direct Spark Ignition Burner Box ONLY Natural Gas Burner Assembly (includes illus. nos. 1 through 8 and 10 through 28) Liquid Propane Gas Burner Assembly (includes illus. nos. 1 through 8 and 10 through 28) STI-22 Liquid Propane Conversion Kit 1/2” B.S.P.T. x 1/2” N.P.T. Transition Coupling Hi-Limit Mounting Bracket #6-32 x 1/4” Phillips Round Head Machine Screw #6-32 Hex Nut Twin Speed Nut 330º Hi-Limit Manual Reset Sail Switch Top and Switch Bracket #4 x 3/4” Phillips Pan Head “A” Machine Screw SPST Sail Switch Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener
* Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately.
450583-3
3493 886 1100 / www.girbau.es
33
Hot Surface Ignition Gas Burner Assembly
34
Girbau, S.A.®
450583-3
Hot Surface Ignition Gas Burner Assembly
Illus. No. 1 2 3 4 5 6 7 8 9* 10 11 12 13 14 15 16
17 18
Part No.
Qty.
150301 881597 128921 150309 141105 150108 817091 151001 140819 140804 141232 318700 150300 128933 883255 141314 142809 817068**
1 1 1 7 3 3 1 3 3 3 1 3 7 1 1 1 1 1
817069**
1
883196** 151000 128975
1 4 1
Description #8-18 x 7/16” Phillips Pan Head TEK Screw Hot Surface Ignitor 24V 2-1/2” Long Hot Surface Ignition Flame Sensor #10-16 x 1/2” Hex Head TEK Crimptite Screw Large Tube Burner #8-32 x 1/2” Phillips Pan Head Machine Screw Hot Surface Ignition Module Mounting Bracket Assembly #8-32 Pal Nut #30 Burner Orifice (natural gas) #48 Burner Orifice (liquid propane gas) 1/2” Direct Spark Ignition Manifold (3-port) Pipe Bracket (bent) #10-16 x 1/2” Hex Washer TEK Screw CE Gas Valve (natural gas) CE 1/2” Liquid Propane Gas Valve 90º x 1/2” x 1-1/2” Gas Shut Off Assembly 1/2” x 29-1/8” Pipe Natural Gas Burner Assembly Complete (includes illus. nos. 1 through 8 and 10 through 18) Liquid Propane Gas Burner Assembly Complete (includes illus. nos. 1 through 8 and 10 through 18) STI-22 Liquid Propane Conversion Kit #6-32 Pal Nut CE Hot Surface Ignition Module
* Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately.
450583-3
3493 886 1100 / www.girbau.es
35
Electric Oven Assembly
36
Girbau, S.A.®
450583-3
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1
803007*
1
835059
1
--------* --------* 150300 802800 802801
1 2 1 1
154004 150300 802799 122200 150303 105500 319202 154002 150300 803100 320611 150301 130400 150300 154001 121010 152014 --------* 150207 120081 120080 152008 121011 --------* 153009 321301 883310
1 2 1 1 2 1 1 1 2 1 1 2 1 2 2 1 3 1 2 1 1
2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
*
Description Large Electric Oven Box Only (for Phase 5, Phase 6, and Dual Timer models) Large Electric Oven Box Only (for Phase 7 models) Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover Only Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Top and Switch Bracket SPST Sail Switch #4 x 3/4” Phillips Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover Only Large Relay Box Cover Only #8-18 x 7/16” Phillips Pan Head TEK Screw 290º Hi-Limit Thermostat #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay #10-24 x 1/2” Phillips Pan Head Machine Screw Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) Oven Wiring #10 Star Washer (2 per element) Large Electric Oven Right Side Cover Only Steam to Electric Transition Plate...Not Illustrated
Refer to Electrical Oven Component Application Chart on page 50.
450583-3
3493 886 1100 / www.girbau.es
37
Rear Electric Panel Assembly
38
Girbau, S.A.®
450583-3
Rear Electric Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3
150300 150008 120701
2 2 1
120716
1
4
88----
1
5
--------
1
6 7
136008 136057
1 or 2 1 or 2
136099
1 or 2
8 9 10 11 12 13 14
150301 150297 152004 121010 153002 132495 322812 --------
2 or 4 2 1 2 1 1 1 1
15 16 17
151000 120765 131932
2 1 1
450583-3
Description #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4-Position Terminal Block (for use on 3-Phase [3ø] models) 2-Position Terminal Block (for use on Single-Phase [1ø] models) 3-Pole Reversing Contactor (for use on reversing models) Transformer (refer to Transformer Listing on page 47) Fuse Holder 1/2-Amp (Slo-Blo) Fuse (for use on 208-240v gas and steam model; all 380-416v models) 3/4-Amp (Slo-Blo) Fuse (for use on all 115v models; 208-240v electric models) #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Green Hex Washer TEK Screw 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Rear Electric Mounting Plate Only Rear Electric Panel Assembly Complete (refer to Rear Electric Panel Assembly Listing on page 48 for Phase 7 models and page 49 for Phase 5, Phase 6, and Dual Timer models) #6-32 Pal Nut Standard End Bracket 24V SPST Relay (for electric models Only)
3493 886 1100 / www.girbau.es
39
Steam Coil/Mechanical Steam Damper Assembly
40
Girbau, S.A.®
450583-3
Steam Coil/Mechanical Steam Damper Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
165011 153002 152004 152002 153007 820321 880781
1 6 6 4 4 2 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
115995 102350 309300 154300 153022 104052 150110 153012 312315 153022 154300 850268 150110 153012 312315 104054 100511 122120 150026 122120 150026 153012 150102 --------*
66 1 1 1 1 1 2 2 1 1 1 1 2 2 1 1 1 1 2 1 2 2 2 1
Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7 through 10) Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) Rod Bracket 1/2” x 3/32” Cotter Pin #10 Steel Burr Mechanical Steam Damper Actuator Rod #8-32 x 1/4” Phillips Round Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount #10 Steel Burr 1/2” x 3/32” Cotter Pin Mechanical Steam Damper Arm #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount Mechanical Steam Damper Motor Mechanical Steam Damper Switch Plate Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw #8 Star Washer #8-32 x 3/8” Pan Head Machine Screw Mechanical Steam Damper Motor Cam
* The mechanical steam damper motor cam is part of the mechanical steam damper motor.
450583-3
3493 886 1100 / www.girbau.es
41
Steam Coil/Air-Operated Steam Damper Assembly
42
Girbau, S.A.®
450583-3
Steam Coil/Air-Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
165011 153002 152004 152002 153007 820321 880280
1 6 6 4 4 2 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
153007 152002 115995 102350 151006 152051 100495 323365 152002 153007 143163 143110 143163 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520
4 4 60 1 1 1 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1
450583-3
Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) 5/16-24 Stainless Steel Acorn Nut 5/16-24 Right Hand Jam Nut 1-1/16” Diameter x 3” Stroke Piston Left and Right Piston Support 1/4-20 Hex Nut 1/4” Lock Washer 1/4” x 1/8” Connector 1/4” Tubing (sold by the foot) 1/4” x 1/8” Connector 1/8” Needle Valve 1/8” Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1” Slotted Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler)
3493 886 1100 / www.girbau.es
43
Fire Suppression System Piping Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
165114 143220 143251 143208 143099 311588 143303 143155 150300 150301 143581 143025 824081 143241
1 1 or 2 1 2 16 1 1 1 2 2 1 1 1 1
15
143315
1
16
136987
1
44
Description Fire Suppression System Solenoid Valve 24v 50/60 Hz 3/8” F.P.T. Brass Tee 3/8” M.P.T. Brass Plug 3/8 Comp x 3/8 M.P.T. Brass Connect 3/8” OD x 0.035 Wall Copper Tubing Sprinkler Head Mounting Plate 3/8” Brass Lock Nut 3/8” Brass Street Elbow #10-16 x 1/2” Hex Washer TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw 3 GPM 3/8” F.P.T. Spray Nozzle 3/8” N.P.T. Nylon Hose Adaptor RC Network Assembly 3/8” Close Brass Nipple (for use with Generation II computers Only) 3/8” x 1/8” F.P.T. Brass Bushing (for use with Generation II computers Only) Water Jet Pressure Switch (for use with Generation II computers Only) Girbau, S.A.®
450583-3
Fire Suppression System Sensor Probe Assembly
Illus. No.
Part No.
Qty.
1
822752
1
2 3 4 5
154007 390390 150301 122647 122690
2 1 2 1 2
450583-3
Description Fire Suppression System Temperature Probe Assembly (includes illus. nos. 1 through 5) 1/4” Push On Fastener Sensor Bracket Only #8-18 x 7/16” Phillips Pan Head TEK Screw 2-Pin Amp Cap, Panel Mount 26-22 U-M-L Pin Contact 3493 886 1100 / www.girbau.es
45
Outer Top/Back Guard Assemblies
Illus. No. 1 2 3*
4 5 6*
7 8 9 * 46
Part No.
Qty.
322809 150301 314424 314422
1 4 1 1
322155
1
150301 150300 312533 801577
7 10 1 1
322159
1
322082 150301 103500
1 13 4
Description Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard (for gas models Only) Top Back Guard (for Phase 5, Phase 6, and Dual Timer electric models Only) Top Back Guard (for Phase 7 electric models Only) #8-18 x 7/16” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Washer TEK Screw Outer Top (for gas models Only) Outer Top (for Phase 5, Phase 6, and Dual Timer electric models Only) Outer Top (for Phase 7 electric models Only) Bottom Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg
There is no outer top or top back guard on steam models. Girbau, S.A.®
450583-3
Transformer Listing
Phase 7 Models Volt
Gas/Steam
Electric
120-240
132070 Step Down Transformer
—
208-240
—
132063 Step Down Transformer
380-416
132082 Step Down Transformer
132082 Step Down Transformer
Phase 6 Models Volt
Gas/Steam
Electric
120-240
132070 Step Down Transformer
—
208-240
—
132063 Step Down Transformer
380-416
132082 Step Down Transformer
132082 Step Down Transformer
Phase 5 and Dual Timer Models
450583-3
Volt
Gas/Steam
Electric
120-240
141403 Step Down Transformer
—
208-240
—
132063 Step Down Transformer
380-416
132082 Step Down Transformer
132082 Step Down Transformer
3493 886 1100 / www.girbau.es
47
Rear Electric Panel Assembly Listing Phase 7 Non-Coin Models Gas
Electric
Non-Reversing
Reversing
Non-Reversing
Reversing
120v (1ø)
830468
—
—
—
208-240v (1ø)
830469
—
830131
—
208-240v (3ø)
830470
830471
830157
822789
380-416v (3ø)**
—
—
830426
—
380-416v (3ø)***
830472
830473
830140
808397
Phase 7 Non-Coin Models Steam Air Damper
Mechanical Damper
Non-Reversing
Reversing
Non-Reversing
Reversing
120v (1ø)
830477
—
830505
—
208-240v (1ø)
830478
—
830479
—
208-240v (3ø)
830480
830482
830481
N/A*
380-416v (3ø)
830483
830484
N/A*
830485
Phase 7 Coin Models Gas Non-Reversing
Non-Reversing with S.A.F.E.
Reversing
Reversing with S.A.F.E.
120v (1ø)
830488
N/A*
—
—
208-240v (1ø)
830489
N/A*
—
—
208-240v (3ø)
N/A*
N/A*
830491
830490
380-416v (3ø)
N/A*
N/A*
830493
830492
* Not available at the time of printing, contact factory for further information. ** For models with single-phase (1ø) motors. *** For models with 3-phase (3ø) motors. 48
Girbau, S.A.®
450583-3
Rear Electric Panel Assembly Listing Phase 6 Models Gas/Steam
Electric
Non-Reversing
Reversing
Non-Reversing
Reversing
120v (1ø)
818073
—
—
—
208-240v (1ø)
818065
—
822045
—
208-240v (3ø)
818074
818067
822806
N/A*
380-416v (3ø)**
—
—
822413
—
380-416v (3ø)***
818069
819068
N/A*
815883
Phase 5 and Dual Timer Models Gas/Steam
Electric
Non-Reversing
Reversing
Non-Reversing
Reversing
120v (1ø)
882662
—
—
—
208-240v (1ø)
882663
—
818395
—
208-240v (3ø)
882664
882673
818400
883335
380-416v (1ø)**
—
—
882667
—
380-416v (3ø)***
882665
882676
N/A*
882676
* Not available at the time of printing, contact factory for further information. ** For models with single-phase (1ø) motors. *** For models with 3-phase (3ø) motors. 450583-3
3493 886 1100 / www.girbau.es
49
Electrical Oven Component Application Chart Phase 7 Models ELEMENT
OVEN WIRE WITH TERMINAL BUS BAR CRIMP TERMINAL LUG P/N: 121011 Qty. Size Part No. Qty. P/N
OVEN RELAY
kW VOLTAGE PHASE
WIRE
OVEN ASSEMBLY*
30 30
416 240
3ø
3 or 4
833136
6
5
120013
1
#8
830401
1 121010
1
3ø
3 or 4
833124
6
5
120013
1
#4
830405
1 121010
1
27
400
3ø
3 or 4
833136
6
5
120013
1
#8
830401
1 121010
1
DPA43
131357
25
380
3ø
3 or 4
833136
6
5
120013
1
#8
830401
1 121010
1
DPA43
131357
Qty. kW
P/N
Cat. No.
P/N
DPA43
131357
400-NX20 131363
Phase 5, Phase 6, and Dual Timer Models kW VOLTAGE PHASE
WIRE
OVEN ASSEMBLY*
30
ELEMENT Qty. kW
P/N
OVEN WIRE WITH TERMINAL BUS BAR CRIMP TERMINAL LUG P/N: 121011 Qty. Size Part No. Qty. P/N
380
3ø
3 or 4
815881
6
6
120014
1
#6
830403
1 121010
1
30
240
3ø
3 or 4
816129
6
5
120013
1
#4
830405
1 121010
1
28
400
3ø
3 or 4
826125
6
5
120013
1
#8
882571
1 121010
1
24
208
3ø
3 or 4
816138
6
4
120010
1
#4
830405
1 121010
1
* 50
OVEN RELAY Cat. No.
P/N
DPA53
131359
400-NX20 131363 DPA43
131357
400-NX20 131363
Consult factory for oven assemblies not listed. Girbau, S.A.®
450583-3
Additional Parts Available
Part No. 112284 112533 114001 114006 114043 114113 114506 114548 120800 120802 120902 120903 121499 121500 122804 404502
450583-3
Description “Phase 6 Non-Coin Program Location Summary” Label “Phase 5 Coin Program Location Summary” Label “CAUTION Exhaust/Lint Screen” Label “WARNING - Fire Hazards” Label “Phase 7.2.2 Programming” Label “Phase 7 Cycle Adjustment Value” Label “Fuse Rating” Label “Phase 7 Coin Program Location” Label 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-On Wire Nut 5-1/2” Harness Tie 8” Harness Tie Manometer (hydro gauge) for Measuring Gas Pressure White Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle)
3493 886 1100 / www.girbau.es
51
450583
3 - 07/01/04-0
